• 8010

    Kopernikusgasse 24 Graz

    Austria

Research Output 1982 2019

Filter
Poster
2019

3D-Druck von Natriumacetat-Trihydrat: produktiv, einfach, ressourcenschonend

Brillinger, M., Fuchs, C., Haas, F. & Pichlkastner, C., 12 Sep 2019.

Research output: Contribution to conferencePosterResearchpeer-review

Adaptive Smart Production: Cognitive aspects in low volume high flexibility e-powertrain production

Brillinger, M., Haas, F., Hick, H. & Weinzerl, M., 26 Feb 2019.

Research output: Contribution to conferencePosterResearch

LEISTBARE E-MOBILITÄT: Kostensenkung durch neue Ansätze in der Produktion

Brillinger, M., Abdul Hadi, M., Kassem, A., Haas, F. & Weinzerl, M., 18 Jun 2019.

Research output: Contribution to conferencePosterResearchpeer-review

LOW-COST E-MOBILITY: Cost Reduction Through New Approaches in Production

Brillinger, M., Abdul Hadi, M., Haas, F. & Weinzerl, M., 16 May 2019.

Research output: Contribution to conferencePosterResearch

Optimierung der Kühlschmierstoff-Zuführung an eine CBN-Schleifscheibe mittels 3D-Druck

Zopf, P., Höller, C., Potocnik, C., Schwemberger, P., Spenger, T., Steffan, M. & Haas, F., 13 Feb 2019.

Research output: Contribution to conferencePosterResearchpeer-review

2018

Drehzahlsynchron-Schleifprozess: Auftretende Prozesskräfte beim Schruppschleifen

Spenger, T., Steffan, M. & Haas, F., 23 Jan 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Drehzahlsynchron-Schleifprozess: Erreichbare Oberflächenqualitäten beim Schlichtschleifen

Steffan, M., Haas, F. & Spenger, T., 15 May 2018, p. 1. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

E-Achse 2030: „Design for Manufacturing“ im Kontext von I4.0

Brillinger, M. & Haas, F., 21 Jun 2018.

Research output: Contribution to conferencePosterResearch

2017

Einsatz von OPC UA zur Optimierung der Prozessregelung in der Schleifbearbeitung

Steffan, M. & Haas, F., 1 Feb 2017.

Research output: Contribution to conferencePosterResearch

File

Ultraschallunterstütztes Bearbeiten von Hartmetall-Bauteilen (HB30F)

Zopf, P. & Haas, F., 1 Feb 2017.

Research output: Contribution to conferencePosterResearch

File
2016

AGriPro CORNET II Projekt: Adaptive Grinding Process (AGriPro)

Steffan, M., 30 Jun 2016.

Research output: Contribution to conferencePosterResearch

Forschungsschleifmaschine: Eckdaten und Maschinenlayout der Rund- und Unrundschleifmaschine

Steffan, M., 30 Jun 2016.

Research output: Contribution to conferencePosterResearch

2015

Alternative Methode zum Entzundern von Hohlwellen

Mortsch, M. & Steffan, M., 2015.

Research output: Contribution to conferencePosterResearch

Open Access
File

Basic Characterisation of 17-4PH structure manufactured by Selective Laser Melting

Brillinger, M., Enzinger, N., Haas, F. & Pfanner, S., 2015.

Research output: Contribution to conferencePosterResearch

Open Access
File
2014
Open Access
File

Energy optimized machine tools and processes with advanced measuring technology and evaluation

Redecker, M. E., Haas, F. & Schmiedhofer, B., 2014.

Research output: Contribution to conferencePosterResearch

Open Access
File

Schleifprozessuntersuchung zur Energie- und Ressourcenoptimierung beim Werkzeugschleifen

Edler, J., 2014.

Research output: Contribution to conferencePosterResearch

Open Access
File
2013

Test bed for hydrostatic bearing gap

Mörwald, G., Edler, J. & Hochleitner, H., 2013.

Research output: Contribution to conferencePosterResearch

Open Access
File
2012

Comparison of LabVIEW and MATLAB for Scientific Research

TAŠNER, T., LOVREC, D. & Edler, J., 2012.

Research output: Contribution to conferencePosterResearch

Innovativer Drehmomentsensor als Schlüsselkomponente zur „Intelligenten Produktion“

Haas, F. & Brandl, M., 2012.

Research output: Contribution to conferencePosterResearch

METHODS FOR CONTACTLESS TEMPERATURE MEASUREMENT ON BALL SCREWS

Edler, J., 2012.

Research output: Contribution to conferencePosterResearch

OPERATION AND ACCURACY OF PARTICLE COUNTERS FOR ON-LINE CONDITION MONITORING OF HYDRAULIC OILS

Edler, J., 2012.

Research output: Contribution to conferencePosterResearch

RPM-SYNCHRONOUS NONCIRCULAR GRINDING

Ablinger, R., 2012.

Research output: Contribution to conferencePosterResearch

2011

Construction and testing of a hydraulic cylinder for water hydraulics

Hochleitner, H. & Edler, J., 2011.

Research output: Contribution to conferencePosterResearch

Estimation of the hydraulic conditions in piezo-pilot-valves

Hochleitner, H. & Edler, J., 2011.

Research output: Contribution to conferencePosterResearch

2010

Neues Messinstrument zur Analyse und Überwachung von Zerspanungsprozessen

Haas, F. & Blaha, J., 2010.

Research output: Contribution to conferencePosterResearch

2007

Compensation Of Thermal Errors On Machine Tools

Blaschun, T., Harreiter, H., Riemenschneider, I. C. & Eckerstorfer, E., 2007.

Research output: Contribution to conferencePosterResearch

Coordinate measuring arms – accuracy enhancements and proper accuracy interpretation

Blaschun, T., 2007.

Research output: Contribution to conferencePosterResearch

Development of Agreeableness: Which Predictors are most Important?

Hanfstingl, B., Riemenschneider, I. C. & Rollett, B., 2007.

Research output: Contribution to conferencePosterResearch

2006

Polygonprofile DIN 32711 und 32712

Frank, A. & Riemenschneider, I. C., 2006.

Research output: Contribution to conferencePosterResearch

Thermal analysis of polymeric materials under machining conditons

Titarenko, O., Frank, A. & Riemenschneider, I. C., 2006.

Research output: Contribution to conferencePosterResearch