• 8010

    Kopernikusgasse 24 Graz

    Austria

Research Output 1982 2019

Filter
Conference contribution
2019

CORROSION BEHAVIOUR OF SLM 316L FOR DIFFERENT BUILD DIRECTIONS AND SURFACE CONDITIONS

Bevli, L., Höller, C., Buzolin, R. H., Vallant, R. & Sommitsch, C., 2019, Proceedings of the European Stainless Steel Conference & DUPLEX 2019 . p. 312-327

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

DEVELOPMENT OF FULLY AUTOMATED TEST BED FOR MEASURING STATIC CHARACTERISTICS OF DIRECTIONAL HYDRAULIC VALVES

Tic, V. & Edler, J., 15 May 2019, Proceedings on Engineering Science: 16th. International Conference on Tribology. 1 ed. Serbien, Vol. 1. p. 607- 611 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Direct Machining of selective laser melted components with optimized support structures

Höller, C., Hinterbuchner, T., Schwemberger, P., Zopf, P., Pichler, R. & Haas, F., 24 Jun 2019, Procedia CIRP. Vol. 81. p. 375-380 6 p. (Procedia CIRP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access

Improving CAD/CAM Process Chains in Forging Industries in the Era of Digitalization Based on a Case Study

Brillinger, M., Martinez, J. C. & Schmid, J., 17 Aug 2019, Proceedings of the 5th World Congress on Mechanical, Chemical, and Material Engineering (MCM'19). 7 p. Paper No. ICMIE 121

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
Computer aided manufacturing
Forging
Computer aided design
Decision making
Industry

RPM-SYNCHRONOUS GRINDING - Investigation and comparison of surface topography of Synchro-Finish manufactured workpieces

Spenger, T., Haas, F., Cihak-Bayr, U., Eder, S. J., Weiss, M., Weinzerl, M. & Schneider, M., 2019, Procedia CIRP: 52nd CIRP Conference on Manufacturing Systems (CMS). Butala, P., Govekar, E. & Vrabič, R. (eds.). Elsevier B.V., Vol. 81. p. 476-481 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access

SELECTION PROCEDURE OF HYDRAULIC VALVES FOR TRIBOLOGICAL RESEARCH

Lovrec, D. & Edler, J., 15 May 2019, (Accepted/In press) Proceedings on Engineering Science: 16th International Conference on Tribology.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2018

A new Approach on a Hydrostatic Motor for Applications in Mobile Cranes

Edler, J., Morolz, K-H. & Jöbstl, H., Mar 2018, Fluid Power Networks: Proceedings 11th International Fluid Power Conference. Aachen, Vol. 1. p. 27-35 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
2017

Energy Consumption Factor as a new Classification Figure to compare Production Processes

Haas, F., 2017, Jahrbuch Instandhaltungstage 2017. Isopp, J. & Dankl, A. (eds.). p. 139-142 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2016

Basic Characterisation of 17-4PH structure manufactured by Selective Laser Melting

Brillinger, M., Haas, F., Enzinger, N. & Pfanner, S., 25 Nov 2016, Industrial perspectives in Additive Technologies. p. 157-162 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2015

Calculation of Control Edges with Simulation

Mörwald, G., Edler, J. & Tic, V., 2015, Fluid Power 2015. Ljubljana: Tiskaran PRESENT d.o.o., p. 249-254

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Implementing a highly dynamic Force Control on a Test Rig

Fischbäck, J., Mörwald, G. & Edler, J., 2015, Fluid Power 2015. Ljubljana: Tiskaran PRESENT d.o.o., p. 145-152

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Innovations in descaling and deburring

Mortsch, M. & Schmid, A., 2015, Innovations in descaling and deburring. Switzerland: Trans Tech Publications Ltd., Vol. Vols 651-653 (2015). p. 1189-1196 (Key Engineering Materials).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of a Servo Valve with a Piezoelectric Pilot Stage

Edler, J. & Hochleitner, H., 2015, Fluid Power 2015. Ljubljana: Tiskaran PRESENT d.o.o., p. 255-262

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2014

Energy optimized machine tools and processes with advanced measuring technology and evaluation

Redecker, M. E., Haas, F. & Schmiedhofer, B., 2014, Trends in the Development of Machinery and Associated Technology. Fojnica: Stamparija Fojnica, Vol. 18. p. 433-436 (Trends in the Development of Machinery and Associated Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

New calculation Method of the Retrofit Factor for Energy Optimization of Machine Tools

Redecker, M. E., Schmiedhofer, B. & Brillinger, M., 2014, International Scientific Conference Development in Machining. Krakau: Cracow University of Technology, Vol. Vol. 4. p. 153-161 (Development in Machining Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

Examination of different grinding oils in the hard metal machining

Goritschnig, M., Edler, J. & Hochleitner, H., 2013, Fluidna Tehnika 2013. Maribor: Fakulteta za strojništvo, p. 71-78

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Operational Excellence

Pichler, R., May 2013, Industrial Engineering und Innovation : Technoökonomie an der TU Graz. Ramsauer, C. (ed.). Graz: Verlag der Technischen Universität Graz

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Test bed for hydrostatic bearing gap

Mörwald, G., Edler, J. & Hochleitner, H., 2013, Fluidna Tehnika 2013. Maribor: Fakulteta za strojništvo, p. 179-185

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2012

Comparison of LabVIEW and MATLAB for Scientific Research

Tasner, T., Lovrec, D., Tasner, F. & Edler, J., 2012, Management of Technology Step to Substainable Production. Zagreb: ITG d.o.o., p. 64-71

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Methods for contactless temperature measurement in ball screws

Edler, J., Tasner, T. & Tič, V., 2012, Management of Technology Step to Substainable Production. Zagreb: ITG d.o.o., p. 222-229

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Operation and accuracy of particle counters for on-line condition monitoring of hydraulic oils

Tič, V., LOVREC, D. & Edler, J., 2012, Management of Technology Step to Substainable Production. Zagreb: ITG d.o.o., p. 252-258

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Reduction in costs using rpm-synchronous noncircular grinding

Ablinger, R., Edler, J. & Mortsch, M., 2012, Management of Technology Step to Sustainable Production. Zagreb: ITG d.o.o., p. 193-199

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2011

Construction and testing of a hydraulic cylinder for water hydraulics

Edler, J. & Hochleitner, H., 2011, Fluidna Tehnika 2011. Maribor: Fakulteta za strojništvo, p. 93-102

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Estimation of the hydraulic conditions in piezo-pilot-valves

Hochleitner, H. & Edler, J., 2011, Fluidna Tehnika 2011. ., p. 103-112 (MEDNAROSNA konferenca Fluidna tehnika).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Estimation of the hydraulic conditions in piezo-pilot-valves

Edler, J., 2011, Fluidna Tehnika 2011. Maribor: Fakulteta za strojnistvo, p. 103-112

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2009

Durchbruch der Robotertechnik auf neue Applikationsbereiche

Kovac, I., 2009, Proceedings of the Eighteenth International Electrotechnical and Computer Science Conference ERK 2009 ; Vol. A. Ljubljana: ., p. 19-19

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2008

Robotik im Bauwesen

Kovac, I., 2008, Bauphysiktagung 2008 - new dimensions!. Graz: Verlag der Technischen Universität Graz, p. 73-86

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2007

An approach for shim-less tooling using robot guiding reconfiguration system

Fritz, W. & Kovac, I., 2007, CARV 2007. ., p. 01-09

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Compensation Of Thermal Errors On Machine Tools

Blaschun, T., Harreiter, H., Riemenschneider, I. C. & Eckerstorfer, E., 2007, Proceedings of the Topical Meeting: Thermal Effects in Precision Systems. ., p. 60-62

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Coordinate measuring arms – accuracy enhancements and proper accuracy interpretation

Blaschun, T. & Kovac, I., 2007, International Conference of the European Society for Precision Engineering and Nanotechnology. Bedford: Euspen, p. 164-168

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Drehfräsen von POLYGONPROFILEN auf mehrachsigen Drehzentren, eine Innovation aus Graz

Riemenschneider, I. C. & Frank, A., 2007, Welle-Nabe-Verbindungen -Gestaltung-Fertigung-Anwendungen. ., Vol. 2004. p. 167-180 (VDI-Berichte/VDI-Tagungsbände).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Thermal behaviour of high tech ball screws

Riemenschneider, I. C., Blaschun, T. & Edler, J., 2007, Proceedings of the Topical Meeting: Thermal Effects in Precision Systems. ., p. 45-47

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2006

Optical System for Segment Deflection Measurement

Vrhovec, M., Kovac, I. & Munih, M., 2006, Robotik 2006. Düsseldorf: Springer-VDI-Verlag GmbH & Co.KG, Vol. 1956. p. 243-250 (VDI-Berichte).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Strukturgleichungsmodelle auf Basis des ML-Algorithmus und des PLSAlgorithmus: ein methodischer Vergleich anhand von Daten der European Study of Adult Well-Being (ESAW)

Hanfstingl, B., Riemenschneider, I. C. & Glück, J., 2006, Perspektiven psychologischer Forschung in Österreich. Lengerich ; Wien: Pabst, p. 10-20

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Thermal analysis of polymeric materials under machining conditions

Frank, A., Riemenschneider, I. C. & Titarenko, O., 2006, proceedings of the 6th euspen international conference. Wien: Copy & Druck, p. 75-78

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Thermal analysis of polymeric materials under machining conditons

Titarenko, O., Frank, A. & Riemenschneider, I. C., 2006, International Conference of the European Society for Precision Engineering and Nanotechnology. Bedford: Euspen, p. 75-78

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2005

A robot guided reconfigurable assembly system

Gödl, M., Kovac, I. & Frank, A., 2005, International Conference on Reconfigurable Manufacturing. Ann Arbor: University of Michigan, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Linear drive and linear encoder - how to optimise interaction

Turan, A., 2005, LAMDAMAP 2005. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

New robot guided fixture concept for reconfigurable assembly systems

Gödl, M., Kovac, I., Frank, A., Rechberger, H. & Haring, K., 2005, 1st International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2005). München: Utz, p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Robot guided reconfiguration in the car body assembly

Trantin, H., Kovac, I., Frank, A. & Szaniawski, M., 2005, International Conference on Changeable, Agile, Reconfigurable and Virtual Production. München: Utz, p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Thermische Effekte an CNC-Maschinen

Frank, A., 2005, Fast Forward, Thermische Einflüsse auf Werkstoffe. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

UNISQUARE, eine neue Messvorrichtung zur Geometriekontrolle von PKM

Frank, A., 2005, Messtechnik im Raum. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Virtual simulation and off-line programming of robot guided reconfiguration systems

Fritz, W. & Kovac, I., 2005, 1st International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2005). München: ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2004

Flexible Inspection Systems in the Body-In-White Manufacturing

Kovac, I., 2004, ROSE 2004, IEEE International Workshop on Robot Sensing, Robotics in the Automotive Industry. New York: IEEE Service Center, p. 41-48 (Institute of Electrical Measurement and Measurement Signal Processing).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Klopfbedatung - eine anspruchsvolle Aufgabe methodisch optimiert

Leithgoeb, R., Ebner, T., Ninaus, M., Riemenschneider, I. C. & Kögeler, H. M., 2004, Klopfregelung für Ottomotoren. Trends für Serienentwickler. Renningen: expert verlag GmbH , p. 231-248

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Machine Tool Metrology, Messung und Bewertung statischer, dynamischer und thermischer Einflüsse auf die Arbeitsgenauigkeit von CNC Maschinen

Frank, A., 2004, 12.Österreichische HSC Tagung. Grossraming: resch Produktionstechnologie, Vol. 12. p. 1-10 (hai spi:d).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Thermische Effekte an CNC Maschinen vor dem Hintergrund der neuen Abnahmenorm ISO 230-3

Frank, A., 2004, (Submitted) Thermische Effekte an CNC Maschinen vor dem Hintergrund der neuen Abnahmenorm ISO 230-3. München: Herbert Utz Verlag, Vol. 70. (Mechatronik, Strukturdynamik von Werkzeugmaschinen).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2003

UNISQUARE, a new device to measure the geometric errors of parallel kinematics

Frank, A. & Stöger, J., 2003, UNISQUARE, a new device to measure the geometric errors of parallel kinematics. Southampton: WITPress, p. 89-96 (Laser Metrology and Machine Performance VI).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2001

CNC machine and environment - from acceptance test to workpiece accuracy

Frank, A., 2001, GEPGYARTAS 2001. Budapest: ., p. 26-33

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

1999

Flexible arm as a coordinate measuring device in dimensional metrology

Kovac, I. & Frank, A., 1999, EUSPEN 99, 1st international Conference and general meeting. Bremen: Schaker Verlag, p. 339-342 (European society for precision engineering and nanotechnology).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review