• 8010

    Kopernikusgasse 24 Graz

    Austria

Research Output 1982 2020

Conference contribution

Methods for contactless temperature measurement in ball screws

Edler, J., Tasner, T. & Tič, V., 2012, Management of Technology Step to Substainable Production. Zagreb: ITG d.o.o., p. 222-229

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Natancnost robotov pri montaži

Kovac, I. & Zlajpah, L., 1993, Montaza in proizvodna logistika : stanje in prihodnji razvoj. Ljubljana: ., p. III-15-III-21-III-15-III-21 (Fakulteta za Strojnistvo, Univerza v Ljubljani).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

New calculation Method of the Retrofit Factor for Energy Optimization of Machine Tools

Redecker, M. E., Schmiedhofer, B. & Brillinger, M., 2014, International Scientific Conference Development in Machining. Krakau: Cracow University of Technology, Vol. Vol. 4. p. 153-161 (Development in Machining Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

New robot guided fixture concept for reconfigurable assembly systems

Gödl, M., Kovac, I., Frank, A., Rechberger, H. & Haring, K., 2005, 1st International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2005). München: Utz, p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Operational Excellence

Pichler, R., May 2013, Industrial Engineering und Innovation : Technoökonomie an der TU Graz. Ramsauer, C. (ed.). Graz: Verlag der Technischen Universität Graz

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Operation and accuracy of particle counters for on-line condition monitoring of hydraulic oils

Tič, V., LOVREC, D. & Edler, J., 2012, Management of Technology Step to Substainable Production. Zagreb: ITG d.o.o., p. 252-258

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Optical System for Segment Deflection Measurement

Vrhovec, M., Kovac, I. & Munih, M., 2006, Robotik 2006. Düsseldorf: Springer-VDI-Verlag GmbH & Co.KG, Vol. 1956. p. 243-250 (VDI-Berichte).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Prodor robotskih sistemov v livarstvo

Kovac, I., 1994, Zbornik referatov 35. livarskega strokovnega posvetovanja s sodelovanjem držav Heksagonale. Ljubljana: Drustvo livarjev Slovenije, p. 27-38

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Reduction in costs using rpm-synchronous noncircular grinding

Ablinger, R., Edler, J. & Mortsch, M., 2012, Management of Technology Step to Sustainable Production. Zagreb: ITG d.o.o., p. 193-199

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Related test methods for robot performance identification

Kovac, I., Haas, F. & Frank, A., 1995, ISMCR '95 : proceedings of the Fourth international symposium. Bratislava: Slovak Technical University, p. 255-260 (Slovak Technical University: Slovak Academy of Sciences and Slovak Metrological Society).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Robot-aided coordinate measurement with the anthropoidic measuring device AMG-1

Kovac, I. & Frank, A., 1997, 3rd ACRA, 3rd Asian conference on robotics and its application. Tokyo: ., p. 197-202 (Japan Robot Association (JARA)).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Robot guided anthropoidic measuring device

Kovac, I. & Frank, A., 1993, RAA 93, 2nd International Workshop on Robotics in Alpe-Adria Region. Wien: ., p. MO1/1-5-MO1/1-5 (TU Vienna, Institut of Robotics).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Robot guided reconfiguration in the car body assembly

Trantin, H., Kovac, I., Frank, A. & Szaniawski, M., 2005, International Conference on Changeable, Agile, Reconfigurable and Virtual Production. München: Utz, p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Robotik im Bauwesen

Kovac, I., 2008, Bauphysiktagung 2008 - new dimensions!. Graz: Verlag der Technischen Universität Graz, p. 73-86

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Robotsko merjenje geometrije z antropoidno merilno napravo

Kovac, I., 1994, Zbornik referatov : Tehniska fakulteta Maribor. Maribor: ., p. 65-72 (Tehniska Fakulteta - Strojnistvo, Maribor).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

RPM-SYNCHRONOUS GRINDING - Investigation and comparison of surface topography of Synchro-Finish manufactured workpieces

Spenger, T., Haas, F., Cihak-Bayr, U., Eder, S. J., Weiss, M., Weinzerl, M. & Schneider, M., 2019, Procedia CIRP: 52nd CIRP Conference on Manufacturing Systems (CMS). Butala, P., Govekar, E. & Vrabič, R. (eds.). Elsevier B.V., Vol. 81. p. 476-481 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access

SELECTION PROCEDURE OF HYDRAULIC VALVES FOR TRIBOLOGICAL RESEARCH

Lovrec, D. & Edler, J., 15 May 2019, (Accepted/In press) Proceedings on Engineering Science: 16th International Conference on Tribology.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Strukturgleichungsmodelle auf Basis des ML-Algorithmus und des PLSAlgorithmus: ein methodischer Vergleich anhand von Daten der European Study of Adult Well-Being (ESAW)

Hanfstingl, B., Riemenschneider, I. C. & Glück, J., 2006, Perspektiven psychologischer Forschung in Österreich. Lengerich ; Wien: Pabst, p. 10-20

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Test bed for hydrostatic bearing gap

Mörwald, G., Edler, J. & Hochleitner, H., 2013, Fluidna Tehnika 2013. Maribor: Fakulteta za strojništvo, p. 179-185

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Test methods for assessing industrial robots

Kovac, I., 1995, LAMDAMAP 95 - Laser metrology and machine performance II. ., p. 173-183

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Thermal analysis of polymeric materials under machining conditions

Frank, A., Riemenschneider, I. C. & Titarenko, O., 2006, proceedings of the 6th euspen international conference. Wien: Copy & Druck, p. 75-78

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Thermal analysis of polymeric materials under machining conditons

Titarenko, O., Frank, A. & Riemenschneider, I. C., 2006, International Conference of the European Society for Precision Engineering and Nanotechnology. Bedford: Euspen, p. 75-78

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Thermal behaviour of high tech ball screws

Riemenschneider, I. C., Blaschun, T. & Edler, J., 2007, Proceedings of the Topical Meeting: Thermal Effects in Precision Systems. ., p. 45-47

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Thermische Effekte an CNC-Maschinen

Frank, A., 2005, Fast Forward, Thermische Einflüsse auf Werkstoffe. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Thermische Effekte an CNC Maschinen vor dem Hintergrund der neuen Abnahmenorm ISO 230-3

Frank, A., 2004, (Submitted) Thermische Effekte an CNC Maschinen vor dem Hintergrund der neuen Abnahmenorm ISO 230-3. München: Herbert Utz Verlag, Vol. 70. (Mechatronik, Strukturdynamik von Werkzeugmaschinen).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

UNISQUARE, a new device to measure the geometric errors of parallel kinematics

Frank, A. & Stöger, J., 2003, UNISQUARE, a new device to measure the geometric errors of parallel kinematics. Southampton: WITPress, p. 89-96 (Laser Metrology and Machine Performance VI).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

UNISQUARE, eine neue Messvorrichtung zur Geometriekontrolle von PKM

Frank, A., 2005, Messtechnik im Raum. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Virtual simulation and off-line programming of robot guided reconfiguration systems

Fritz, W. & Kovac, I., 2005, 1st International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2005). München: ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
Diploma Thesis

Berücksichtigung des Nicken und Gieren bei der Crash-Simulation

Blaschun, T., 2004

Research output: ThesisDiploma ThesisResearch

Charakterisierung metallischer Lasersinterstrukturen

Brillinger, M., 2015

Research output: ThesisDiploma ThesisResearch

CNC-Gewindeschleifen

Ablinger, R., 2004

Research output: ThesisDiploma ThesisResearch

Implementierung einer Methodik zur automatisierten Kalibrierung der Klopfregelung bei Ottomotoren

Riemenschneider, I. C., 2003

Research output: ThesisDiploma ThesisResearch

Konzept eines kollaborativen Gelenkarmroboters mit Arduino Steuerung

Eisele, P. S., May 2018

Research output: ThesisDiploma ThesisResearch

Priblizno dolocanje optimalne odzivne funkcije

Kovac, I., 1982

Research output: ThesisDiploma ThesisResearch

Prismatische Stäbe unter allgemeiner Biegung.

Edler, J., 2006

Research output: ThesisDiploma ThesisResearch

Doctoral Thesis

3D-Druck von Natriumacetat-Trihydrat als Ergebnis eines konsequenten Entwicklungsprozesses

Brillinger, M., 31 Jul 2018, 134 p.

Research output: ThesisDoctoral ThesisResearch

File

Genauigkeitssteigerung bei Gelenkarmkoordinatenmessmaschinen

Blaschun, T., 2007

Research output: ThesisDoctoral ThesisResearch

Machine-Tool for Research in Synchronous Grinding

Steffan, M., 15 Jan 2018, 151 p.

Research output: ThesisDoctoral ThesisResearch

Messen mit Industrieroboter : Entwicklung eines robotergerechten Messgerätes

Kovac, I., 1992

Research output: ThesisDoctoral ThesisResearch

Thermische Simulation von Kugelrollspindeln

Edler, J., 2011

Research output: ThesisDoctoral ThesisResearch

Master's Thesis

Adaptive Assembly Concepts for Low Volume Production Based on Two Case Studies

Abdul Hadi, M., 15 Oct 2019, 133 p.

Research output: ThesisMaster's ThesisResearch

Automation
Costs
Other report

Aufgabenvariable Fertigungslinie für optimierte Roboteranlagenauslastung

Fritz, W., Kovac, I., Preis, M., Tögl, R., Trantin, H., Gewessler, A. & Jereb, M., 2007, .

Research output: Book/ReportOther reportResearch

Auswahl der Antriebskomponenten

Kovac, I., Gracner, M. & Wolbank, G., 2008, .

Research output: Book/ReportOther reportResearch

BERECHNUNG UND KONSTRUKTION DER MONTAGEEINHEIT “TRIMAN”

Kovac, I., Gracner, M., Kollar, M., Goritschnig, M. P., Andrasec, I. & Wolbank, G., 2008, Graz: .

Research output: Book/ReportOther reportResearch

Development of a concept for a robotised assembly of facade panels

Kovac, I. & Harreiter, H., 2007, .

Research output: Book/ReportOther reportResearch

E-Technology of assembly

Kovac, I. & Harreiter, H., 2007, .

Research output: Book/ReportOther reportResearch

E-TECHNOLOGY OF ASSEMBLY

Kovac, I. & Gracner, M., 2008, Graz: .

Research output: Book/ReportOther reportResearch

E-Technology of Assembly – Final Report

Kovac, I. & Gracner, M., 2009, .

Research output: Book/ReportOther reportResearch

E-Technology of Assembly – Screw fixation

Kovac, I., 2007, .

Research output: Book/ReportOther reportResearch