• 8010

    Kopernikusgasse 24 Graz

    Austria

Research Output 1982 2019

Commissioned report

Fertigungsoptimiertes Redesign eines Prototypen einer Headkamera

Edler, J., 2012, .

Research output: Book/ReportCommissioned reportResearch

The virtual robotised production line for bogies

Kovac, I., Frank, A. & Gödl, M., 2004, Graz: . (Zwischenbericht A4_P2)

Research output: Book/ReportCommissioned reportResearch

The virtual robotised production line for bogies

Kovac, I., Frank, A. & Gödl, M., 2005, Graz: . (Abschlussbericht A4_P2)

Research output: Book/ReportCommissioned reportResearch

The virtual robotised production line for bogies

Kovac, I., Frank, A. & Gödl, M., 2003, Graz: . (Zwischenbericht A4_P2)

Research output: Book/ReportCommissioned reportResearch

Untersuchung von ionischen Flüssigkeiten

Edler, J., 2012, .

Research output: Book/ReportCommissioned reportResearch

Virtuelle Multi-Roboter Produktionszelle

Kovac, I., Frank, A., Fritz, W., Zopf, P. & Szaniawski, M., 2005, Graz: . (Zwischenbericht A4_P9)

Research output: Book/ReportCommissioned reportResearch

Virtuelle Multi-Roboter Produktionszelle

Kovac, I., Frank, A., Fritz, W. & Zopf, P., 2006, Graz: . (Abschlussbericht)

Research output: Book/ReportCommissioned reportResearch

Conference contribution

AMG-1: a new approach to robot integrated measurement

Kovac, I. & Frank, A., 1996, 27th ISIR, 27th international symposium on Industrial robots. Milan: ., p. 955-960 (Robotics towards 2000).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

An approach for shim-less tooling using robot guiding reconfiguration system

Fritz, W. & Kovac, I., 2007, CARV 2007. ., p. 01-09

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A new anthropoidic measurig device for robot aided measurement

Kovac, I. & Frank, A., 1994, 25th ISIR, 25th International Symposium on Industrial Robots, "Robotics 94-Flexible Production-Flexible Automation". Hannover: ., p. 655-661 (MEP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A new Approach on a Hydrostatic Motor for Applications in Mobile Cranes

Edler, J., Morolz, K-H. & Jöbstl, H., Mar 2018, Fluid Power Networks: Proceedings 11th International Fluid Power Conference. Aachen, Vol. 1. p. 27-35 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access

A novel industrial robot calibration device

Kovac, I. & Frank, A., 1992, Robotics in Alpe Adria Region : proceedings of the 1st International Meeting on Robotics in Alpe Adria Region. Ljubljana: ., p. 162-167 (Slovene Robotic Society).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Antropoidisches Messgerät (AMG-1) : ein Neuer Lösungansatz

Kovac, I., 1994, 2. GPT. Graz: ., p. 1-14 (Eine Veranstaltung zum Thema Präzisionsreserven in der mechanischen Fertigung).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A robot guided reconfigurable assembly system

Gödl, M., Kovac, I. & Frank, A., 2005, International Conference on Reconfigurable Manufacturing. Ann Arbor: University of Michigan, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Automated geometrical inspection by a new robot guided anthropoidic measuring device

Kovac, I. & Frank, A., 1994, Automation 94, The third International Conference on Automation Technology. Taipei: ., Vol. Vol 6. p. 107-112

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Automated quality control by a novel anthropoidic measuring device

Kovac, I. & Frank, A., 1993, ISMCR 93, Procedings of the Third international symposium on measurement and control in robotics. Torino: ., p. AP.IV/1-6-AP.IV/1-6 (AMMA - Via Vela 17, Torino, Italy).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Basic Characterisation of 17-4PH structure manufactured by Selective Laser Melting

Brillinger, M., Haas, F., Enzinger, N. & Pfanner, S., 25 Nov 2016, Industrial perspectives in Additive Technologies. p. 157-162 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Calculation of Control Edges with Simulation

Mörwald, G., Edler, J. & Tic, V., 2015, Fluid Power 2015. Ljubljana: Tiskaran PRESENT d.o.o., p. 249-254

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Clenkaste merilne naprave za proizvodno merilno tehniko

Kovac, I., 1994, Koordinatenmesstechnik - ein Baustein der Qualitätsicherung. Maribor: Tehniška fakulteta - Strojništvo, Laboratorij za tehnološke meritve, p. 95-106 (Tagungsbuch - Tehniska Fakulteta Maribor).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CNC machine and environment - from acceptance test to workpiece accuracy

Frank, A., 2001, GEPGYARTAS 2001. Budapest: ., p. 26-33

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Comparison of LabVIEW and MATLAB for Scientific Research

Tasner, T., Lovrec, D., Tasner, F. & Edler, J., 2012, Management of Technology Step to Substainable Production. Zagreb: ITG d.o.o., p. 64-71

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Compensation Of Thermal Errors On Machine Tools

Blaschun, T., Harreiter, H., Riemenschneider, I. C. & Eckerstorfer, E., 2007, Proceedings of the Topical Meeting: Thermal Effects in Precision Systems. ., p. 60-62

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Construction and testing of a hydraulic cylinder for water hydraulics

Edler, J. & Hochleitner, H., 2011, Fluidna Tehnika 2011. Maribor: Fakulteta za strojništvo, p. 93-102

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Coordinate measuring arms – accuracy enhancements and proper accuracy interpretation

Blaschun, T. & Kovac, I., 2007, International Conference of the European Society for Precision Engineering and Nanotechnology. Bedford: Euspen, p. 164-168

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CORROSION BEHAVIOUR OF SLM 316L FOR DIFFERENT BUILD DIRECTIONS AND SURFACE CONDITIONS

Bevli, L., Höller, C., Buzolin, R. H., Vallant, R. & Sommitsch, C., 2019, Proceedings of the European Stainless Steel Conference & DUPLEX 2019 . p. 312-327

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

DEVELOPMENT OF FULLY AUTOMATED TEST BED FOR MEASURING STATIC CHARACTERISTICS OF DIRECTIONAL HYDRAULIC VALVES

Tic, V. & Edler, J., 15 May 2019, Proceedings on Engineering Science: 16th. International Conference on Tribology. 1 ed. Serbien, Vol. 1. p. 607- 611 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Die Norm-Polygonverbindungen P3G und P4C - Geometrische Grundlagen, Funktionsverhalten und Fertigung

Frank, A. & Pflanzl, M., 1998, Die Norm-Polygonverbindungen P3G und P4C - Geometrische Grundlagen, Funktionsverhalten und Fertigung. Düsseldorf: VDI, Vol. 1384. p. 105-120 (VDI-Berichte).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Direct Machining of selective laser melted components with optimized support structures

Höller, C., Hinterbuchner, T., Schwemberger, P., Zopf, P., Pichler, R. & Haas, F., 24 Jun 2019, Procedia CIRP. Vol. 81. p. 375-380 6 p. (Procedia CIRP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access

Drehfräsen von POLYGONPROFILEN auf mehrachsigen Drehzentren, eine Innovation aus Graz

Riemenschneider, I. C. & Frank, A., 2007, Welle-Nabe-Verbindungen -Gestaltung-Fertigung-Anwendungen. ., Vol. 2004. p. 167-180 (VDI-Berichte/VDI-Tagungsbände).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Durchbruch der Robotertechnik auf neue Applikationsbereiche

Kovac, I., 2009, Proceedings of the Eighteenth International Electrotechnical and Computer Science Conference ERK 2009 ; Vol. A. Ljubljana: ., p. 19-19

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Energy Consumption Factor as a new Classification Figure to compare Production Processes

Haas, F., 2017, Jahrbuch Instandhaltungstage 2017. Isopp, J. & Dankl, A. (eds.). p. 139-142 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Energy optimized machine tools and processes with advanced measuring technology and evaluation

Redecker, M. E., Haas, F. & Schmiedhofer, B., 2014, Trends in the Development of Machinery and Associated Technology. Fojnica: Stamparija Fojnica, Vol. 18. p. 433-436 (Trends in the Development of Machinery and Associated Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Estimation of the hydraulic conditions in piezo-pilot-valves

Hochleitner, H. & Edler, J., 2011, Fluidna Tehnika 2011. ., p. 103-112 (MEDNAROSNA konferenca Fluidna tehnika).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Estimation of the hydraulic conditions in piezo-pilot-valves

Edler, J., 2011, Fluidna Tehnika 2011. Maribor: Fakulteta za strojnistvo, p. 103-112

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Examination of different grinding oils in the hard metal machining

Goritschnig, M., Edler, J. & Hochleitner, H., 2013, Fluidna Tehnika 2013. Maribor: Fakulteta za strojništvo, p. 71-78

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Flexible arm as a coordinate measuring device in dimensional metrology

Kovac, I. & Frank, A., 1999, EUSPEN 99, 1st international Conference and general meeting. Bremen: Schaker Verlag, p. 339-342 (European society for precision engineering and nanotechnology).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Flexible Inspection Systems in the Body-In-White Manufacturing

Kovac, I., 2004, ROSE 2004, IEEE International Workshop on Robot Sensing, Robotics in the Automotive Industry. New York: IEEE Service Center, p. 41-48 (Institute of Electrical Measurement and Measurement Signal Processing).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

High precision measuring equipment for testing and calibration of anthropoidic mechanism devices

Kovac, I. & Frank, A., 1998, 29th ISR, 29th International symposium on robotics. Birmingham: ., p. 1-4 (Advanced robotics: beyond 2000).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

High-precision testing and calibration metrology for portable coordinate measuring arms

Kovac, I. & Frank, A., 1999, (Submitted) Laser metrology 1999, International Symposium on Laser Metrology for Precision Measurement and Inspection in Industry. Florianopolis: ., (International Measurement Confederation - IMEKO).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

HULKs - SPL Team Description Paper 2014

Kaufmann, S., Tretau, O., Wurl, A., Patschkowski, F., Riebesel, N., Eisele, P. S., Nissen, J. & Oehlmann, R., 2014, RoboCup 2014.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Implementing a highly dynamic Force Control on a Test Rig

Fischbäck, J., Mörwald, G. & Edler, J., 2015, Fluid Power 2015. Ljubljana: Tiskaran PRESENT d.o.o., p. 145-152

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Improving CAD/CAM Process Chains in Forging Industries in the Era of Digitalization Based on a Case Study

Brillinger, M., Martinez, J. C. & Schmid, J., 17 Aug 2019, Proceedings of the 5th World Congress on Mechanical, Chemical, and Material Engineering (MCM'19). 7 p. Paper No. ICMIE 121

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
Computer aided manufacturing
Forging
Computer aided design
Decision making
Industry

Innovations in descaling and deburring

Mortsch, M. & Schmid, A., 2015, Innovations in descaling and deburring. Switzerland: Trans Tech Publications Ltd., Vol. Vols 651-653 (2015). p. 1189-1196 (Key Engineering Materials).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of a Servo Valve with a Piezoelectric Pilot Stage

Edler, J. & Hochleitner, H., 2015, Fluid Power 2015. Ljubljana: Tiskaran PRESENT d.o.o., p. 255-262

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Klemmen, Greifen und Wenden in der Roboterperipherie

Kovac, I., 1998, Praxistreff Pneumatic 2000. Steyr, Esslingen: ., p. 89-106 (Pneumatic 2000, der Praxistreff für Automatisierungsspezialisten).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Klopfbedatung - eine anspruchsvolle Aufgabe methodisch optimiert

Leithgoeb, R., Ebner, T., Ninaus, M., Riemenschneider, I. C. & Kögeler, H. M., 2004, Klopfregelung für Ottomotoren. Trends für Serienentwickler. Renningen: expert verlag GmbH , p. 231-248

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Linear drive and linear encoder - how to optimise interaction

Turan, A., 2005, LAMDAMAP 2005. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Machine Tool Metrology, Messung und Bewertung statischer, dynamischer und thermischer Einflüsse auf die Arbeitsgenauigkeit von CNC Maschinen

Frank, A., 2004, 12.Österreichische HSC Tagung. Grossraming: resch Produktionstechnologie, Vol. 12. p. 1-10 (hai spi:d).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Methods for calibration and testing of flexible arm measuring devices

Kovac, I. & Frank, A., 1999, LAMDAMAP 99, Laser Metrology and Machine Performance IV. Chiles, V. (ed.). Southampton: WIT Press, p. 3-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Methods for contactless temperature measurement in ball screws

Edler, J., Tasner, T. & Tič, V., 2012, Management of Technology Step to Substainable Production. Zagreb: ITG d.o.o., p. 222-229

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review