• 8010

    Kopernikusgasse 24 Graz

    Austria

Research Output 1982 2019

1982

Priblizno dolocanje optimalne odzivne funkcije

Kovac, I., 1982

Research output: ThesisDiploma ThesisResearch

1991

Eine neue Kalibriervorrichtung für Knickarmroboter

Kovac, I., 1991, In : Technikreport. 18, 12, p. 23-25

Research output: Contribution to journalArticleResearch

Eine neue Kalibriervorrichtung für Knickarmroboter

Kovac, I. & Frank, A., 1991, In : VDI-Berichte. 921, p. 15-22

Research output: Contribution to journalArticleResearch

1992

A novel industrial robot calibration device

Kovac, I. & Frank, A., 1992, Robotics in Alpe Adria Region : proceedings of the 1st International Meeting on Robotics in Alpe Adria Region. Ljubljana: ., p. 162-167 (Slovene Robotic Society).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Messen mit Industrieroboter : Entwicklung eines robotergerechten Messgerätes

Kovac, I., 1992

Research output: ThesisDoctoral ThesisResearch

1993

Automated quality control by a novel anthropoidic measuring device

Kovac, I. & Frank, A., 1993, ISMCR 93, Procedings of the Third international symposium on measurement and control in robotics. Torino: ., p. AP.IV/1-6-AP.IV/1-6 (AMMA - Via Vela 17, Torino, Italy).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Circular Test: A new method for testing industrial robots

Haas, F. & Frank, A., 13 Jun 1993.

Research output: Contribution to conferencePaperResearch

Dynamische Roboterprüfung - Der Kreisformtest nun auch für Industrieroboter

Haas, F., 1993, In : Technikreport. 9a/93, p. 17-19

Research output: Contribution to journalArticleResearch

Natancnost robotov pri montaži

Kovac, I. & Zlajpah, L., 1993, Montaza in proizvodna logistika : stanje in prihodnji razvoj. Ljubljana: ., p. III-15-III-21-III-15-III-21 (Fakulteta za Strojnistvo, Univerza v Ljubljani).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Pose- und Bahn- Genauigkeitsprüfung von Roboten nach ISO 9283

Kovac, I., 1993, In : Technikreport. 20, 9A, p. 20-22

Research output: Contribution to journalArticleResearch

Robot guided anthropoidic measuring device

Kovac, I. & Frank, A., 1993, RAA 93, 2nd International Workshop on Robotics in Alpe-Adria Region. Wien: ., p. MO1/1-5-MO1/1-5 (TU Vienna, Institut of Robotics).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1994

A new anthropoidic measurig device for robot aided measurement

Kovac, I. & Frank, A., 1994, 25th ISIR, 25th International Symposium on Industrial Robots, "Robotics 94-Flexible Production-Flexible Automation". Hannover: ., p. 655-661 (MEP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Antropoidisches Messgerät (AMG-1) : ein Neuer Lösungansatz

Kovac, I., 1994, 2. GPT. Graz: ., p. 1-14 (Eine Veranstaltung zum Thema Präzisionsreserven in der mechanischen Fertigung).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Automated geometrical inspection by a new robot guided anthropoidic measuring device

Kovac, I. & Frank, A., 1994, Automation 94, The third International Conference on Automation Technology. Taipei: ., Vol. Vol 6. p. 107-112

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Clenkaste merilne naprave za proizvodno merilno tehniko

Kovac, I., 1994, Koordinatenmesstechnik - ein Baustein der Qualitätsicherung. Maribor: Tehniška fakulteta - Strojništvo, Laboratorij za tehnološke meritve, p. 95-106 (Tagungsbuch - Tehniska Fakulteta Maribor).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Messvorrichtung

Kovac, I., 14 Sep 1994, (Submitted) Patent No. EP 0 615 110 A1

Research output: PatentResearch

Prodor robotskih sistemov v livarstvo

Kovac, I., 1994, Zbornik referatov 35. livarskega strokovnega posvetovanja s sodelovanjem držav Heksagonale. Ljubljana: Drustvo livarjev Slovenije, p. 27-38

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Robot Guided Anthropoidic Measuring Device

Kovac, I. & Frank, A., 1994, RAA 93, Robotics in Alpe-Adria Region. Wien, New York: Springer Verlag, p. 198-202 (Schriftenreihe der wissenschaftlichen Landesakademie für Niedeösterreich).

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Robotsko merjenje geometrije z antropoidno merilno napravo

Kovac, I., 1994, Zbornik referatov : Tehniska fakulteta Maribor. Maribor: ., p. 65-72 (Tehniska Fakulteta - Strojnistvo, Maribor).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Wie genau arbeitet Ihre CNC-Maschine? - Die Dynamik im Brennpunkt

Haas, F., 1994, In : Technikreport. 9a/94, p. 27-31

Research output: Contribution to journalArticleResearch

1995

Related test methods for robot performance identification

Kovac, I., Haas, F. & Frank, A., 1995, ISMCR '95 : proceedings of the Fourth international symposium. Bratislava: Slovak Technical University, p. 255-260 (Slovak Technical University: Slovak Academy of Sciences and Slovak Metrological Society).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Test methods for assessing industrial robots

Kovac, I., 1995, LAMDAMAP 95 - Laser metrology and machine performance II. ., p. 173-183

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1996

AMG-1: a new approach to robot integrated measurement

Kovac, I. & Frank, A., 1996, 27th ISIR, 27th international symposium on Industrial robots. Milan: ., p. 955-960 (Robotics towards 2000).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1997

Mobile Koordinatenmessmaschine und Kalibrierverfahren

Kovac, I., 16 Apr 1997, Patent No. EP 0615 110 B1

Research output: PatentResearch

Robot-aided coordinate measurement with the anthropoidic measuring device AMG-1

Kovac, I. & Frank, A., 1997, 3rd ACRA, 3rd Asian conference on robotics and its application. Tokyo: ., p. 197-202 (Japan Robot Association (JARA)).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1998

Anthropoidic measuring devices in coordinate measuring techniques

Kovac, I., 1998, In : Strojniski vestnik - Journal of mechanical engineering. 44, 5/6, p. 175-182

Research output: Contribution to journalArticleResearchpeer-review

Die Norm-Polygonverbindungen P3G und P4C - Geometrische Grundlagen, Funktionsverhalten und Fertigung

Frank, A. & Pflanzl, M., 1998, Die Norm-Polygonverbindungen P3G und P4C - Geometrische Grundlagen, Funktionsverhalten und Fertigung. Düsseldorf: VDI, Vol. 1384. p. 105-120 (VDI-Berichte).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

High precision measuring equipment for testing and calibration of anthropoidic mechanism devices

Kovac, I. & Frank, A., 1998, 29th ISR, 29th International symposium on robotics. Birmingham: ., p. 1-4 (Advanced robotics: beyond 2000).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Klemmen, Greifen und Wenden in der Roboterperipherie

Kovac, I., 1998, Praxistreff Pneumatic 2000. Steyr, Esslingen: ., p. 89-106 (Pneumatic 2000, der Praxistreff für Automatisierungsspezialisten).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Messvorrichtung zum Mesen der Positionier- und Bahngenauigkeit eines bewegten Maschinenteils

Kovac, I., 25 Apr 1998, (Submitted) Patent No. EP 98107582.3-2213

Research output: PatentResearch

Messvorrichtung zur Kontrolle der geometrischen und dynamischen Genauigkeit von NC-Werkzeugmaschinen und Industrierobotern

Haas, F., 5 Aug 1998, IPC No. EP 0 729 005 B1, Priority date 23 Feb 1995

Research output: PatentResearch

1999

Flexible arm as a coordinate measuring device in dimensional metrology

Kovac, I. & Frank, A., 1999, EUSPEN 99, 1st international Conference and general meeting. Bremen: Schaker Verlag, p. 339-342 (European society for precision engineering and nanotechnology).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

High-precision testing and calibration metrology for portable coordinate measuring arms

Kovac, I. & Frank, A., 1999, (Submitted) Laser metrology 1999, International Symposium on Laser Metrology for Precision Measurement and Inspection in Industry. Florianopolis: ., (International Measurement Confederation - IMEKO).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Methods for calibration and testing of flexible arm measuring devices

Kovac, I. & Frank, A., 1999, LAMDAMAP 99, Laser Metrology and Machine Performance IV. Chiles, V. (ed.). Southampton: WIT Press, p. 3-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Vorrichtung zur Bearbeitung von unrunden Bohrungen

Schmid, A., 9 Dec 1999, Patent No. DE 19806688 C2

Research output: PatentResearch

2000

Higher precision of machine tools - the European approach

Frank, A. (ed.), 2000, Graz: Eigenverlag.

Research output: Book/ReportAnthologyResearch

2001

CNC machine and environment - from acceptance test to workpiece accuracy

Frank, A., 2001, GEPGYARTAS 2001. Budapest: ., p. 26-33

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

ISO 230 - Neue Beurteilungskriterien für CNC-Maschinen

Frank, A., 2001, In : Maschinenmarkt. Sonderausg, p. 45-48

Research output: Contribution to journalArticleResearch

Testing and calibration of coordinate measuring arms

Kovac, I. & Frank, A., 2001, In : Precision engineering. 25, 2, p. 90-99

Research output: Contribution to journalArticleResearchpeer-review

2002

Apparatus and a procedure to calibrate coordinate measuring arms

Kovac, I. & Klein, A., 2002, In : Strojniski vestnik - Journal of mechanical engineering. 48, 1, p. 17-32

Research output: Contribution to journalArticleResearchpeer-review

Ein Beitrag zur Bewertung von Roboterschweisspozessen im Dickblechbereich am Beispiel der Schienenfahrzeugindustrie

Kovac, I., Rechberger, H. & Gödl, M., 2002, In : VDI-Berichte. 1679, p. 407-413

Research output: Contribution to journalArticleResearch

Gebaute Kurbelwelle und ein Verfahren zur Herstellung derselben

Schmid, A., 7 Nov 2002, Patent No. DE 10061042 C2

Research output: PatentResearch

Greifzangenanordnung für Roboteranlagen

Kovac, I., 29 Nov 2002, (Submitted) Patent No. EP 1796-2002

Research output: PatentResearch

Measuring device for measuring the accuracy of the position and track of a moving machine element

Kovac, I., 13 Aug 2002, Patent No. EP 6,433,875 B1

Research output: PatentResearch

2003

Greifzangenanordnung für Roboteranlagen

Kovac, I., Obendrauf, H. & Gödl, M., 28 Nov 2003, (Submitted) Patent No. 03450267.4-

Research output: PatentResearch

Hydrauliksimulation einer Zerkleinerungsanlage

Haas, F. & Grabmeier, A., 13 Nov 2003.

Research output: Contribution to conferencePaperResearch

Implementierung einer Methodik zur automatisierten Kalibrierung der Klopfregelung bei Ottomotoren

Riemenschneider, I. C., 2003

Research output: ThesisDiploma ThesisResearch