• 8010

    Inffeldgasse 13 Graz

    Austria

Research Output

Filter
Article
2017

The sensitivity of filtered Two Fluid Models to the underlying resolved simulation setup

Cloete, J. H., Cloete, S., Municchi, F., Radl, S. & Amini, S., 2017, In : Powder Technology. 316, p. 265–277

Research output: Contribution to journalArticle

File

Why Hot Melts Do Not Stick to Cold Surfaces

Treffer, D. F. & Khinast, J. G., Oct 2017, In : Polymer Engineering and Science. 57, 10, p. 1083-1089

Research output: Contribution to journalArticle

2016

A Model to Predict Liquid Bridge Formation between Wet Particles Based on Direct Numerical Simulations

Wu, M., Radl, S. & Khinast, J., 16 Feb 2016, In : AIChE Journal. 62, p. 1877-1897 20 p.

Research output: Contribution to journalArticle

Open Access
File

CFD-DEM predictions of heat transfer in packed beds using commercial and open source codes

Singhal, A., Cloete, S., Radl, S., Ferreira, R. Q. & Amini, S., 12 Sep 2016, In : MAYFEB Journal of Chemical Engineering. 1, 1, p. 1-17

Research output: Contribution to journalArticle

Open Access
File

Characterization and condensation behaviour of gravimetric tars produced during spruce torrefaction

Anca-Couce, A., Brunner, T., Kanzian, W., Obernberger, I. & Trattner, K., 2016, In : Journal of analytical and applied pyrolysis. 119, p. 173-179

Research output: Contribution to journalArticle

Comparing particle size distributions of an arbitrary shape

Scheibelhofer, O., Besenhard, M., Piller, M. & Khinast, J., 16 Feb 2016, In : Powder Technology. 294, p. 134-145

Research output: Contribution to journalArticle

Continuous low-dose feeding of highly active pharmaceutical ingredients in hot-melt extrusion

Paudel, A., Llusa, M., Mohr, S., Baumgartner, R., Koscher, G. & Khinast, J., 2 Aug 2016, In : Drug Development and Industrial Pharmacy. p. 1360-1364 4 p.

Research output: Contribution to journalArticle

Defining patient centric pharmaceutical drug product design

Stegemann, S., 1 Apr 2016, In : The AAPS journal . 18, 5, p. 10476-1055

Research output: Contribution to journalArticle

Development of a design space and predictive statistical model for capsule filling of low-fill-weight inhalation products

Paudel, A., Faulhammer, E., Llusa, M., Wahl, PR., Lawrence, S., Biserni, S., Calzolari, V. & Khinast, J., 1 Feb 2016, In : Drug Development and Industrial Pharmacy. 42, 2, p. 221-230

Research output: Contribution to journalArticle

Dominating High Temperature Corrosion Mechanisms in Low Alloy Steels in Wood Chips Fired Boilers

Gruber, T., Retschitzegger, S., Scharler, R. & Obernberger, I., 17 Mar 2016, In : Energy & fuels. 30, 3, p. 2385-2394 10 p.

Research output: Contribution to journalArticle

Dynamic cross-flow filtration: enhanced continuous small-scale solid-liquid separation

Gursch, J., Hohl, R., Dujmovic, D., Brozio, J., Krumme, M., Rasenack, N. & Khinast, J., 2016, In : Drug Development and Industrial Pharmacy. 42, 6, p. 977-984

Research output: Contribution to journalArticle

Effect of Bubble-Particle Interaction Models on Flow Predictions in Three-Phase Bubble Columns

Gruber, M. C., Radl, S. & Khinast, J., 26 Feb 2016, In : Chemical Engineering Science. 146, p. 226–243

Research output: Contribution to journalArticle

Open Access

Electron beam welding of thick-walled copper components

Enzinger, N., Loidolt, P., Wiednig, C. A., Stütz, M. & Sommitsch, C., 13 Jul 2016, In : Science and technology of welding and joining. 22, p. 127-132 6 p.

Research output: Contribution to journalArticle

Evaluation of wall friction models for riser flow

Cloete, J. H., Cloete, S., Radl, S. & Amini, S., 2016, In : Powder Technology. 303, p. 156-167

Research output: Contribution to journalArticle

Open Access
File

Fluid and Particle Coarsening of Drag Force for Discrete-Parcel Approach

Ozel, A., Kolehmainen, J., Radl, S. & Sundaresan, S., 8 Aug 2016, In : Chemical Engineering Science. 155, p. 258–267

Research output: Contribution to journalArticle

Open Access
File

Highly efficient spatial data filtering in parallel using the opensource library CPPPO

Municchi, F., Goniva, C. & Radl, S., 26 May 2016, In : Computer physics communications. 207, p. 400–414 15 p.

Research output: Contribution to journalArticle

Improving the granule strength of roller-compacted ibuprofen sodium for hot-melt coating processing

Paudel, A., Gomes Lopes, D., Garsuch, V., Becker, K., Zimmer, A. & Salar-Behzadi, S., 20 Aug 2016, In : International Journal of Pharmaceutics. p. 285-295

Research output: Contribution to journalArticle

Influence of Wall Effects During Solid Liquid Filter Test on Filter Up-Scaling

Gursch, J., Giner Tovar, R. & Krammer, G., 2016, In : Chemical Engineering & Technology. 39, 3, p. 417–424

Research output: Contribution to journalArticle

Langzeitspeicherung von Wärme mittels Phasenwechselmaterialen

Schranzhofer, H., Moser, C., Englmair, G. & Furbo, S., Mar 2016, In : Erneuerbare Energie. 03/2016, p. 14-15 2 p.

Research output: Contribution to journalArticle

Local gas holdup simulation and validation of industrial-scale aerated bioreactors

Witz, C., Treffer, D. F., Hardiman, T. & Khinast, J., 2 Oct 2016, In : Chemical Engineering Science. 152, p. 636-648 13 p.

Research output: Contribution to journalArticle

Mechanistic understanding of size-based fiber separation in coiled tubes

Redlinger-Pohn, J. D., Jagiello, L. A., Bauer, W. & Radl, S., Jul 2016, In : International journal of multiphase flow. 83, p. 239-253

Research output: Contribution to journalArticle

Open Access
File

Multi-methodological investigation of the variability of the microstructure of HPMC hard capsules

Faulhammer, E., Khinast, J., Paudel, A., Wahl, V. & Markl, D., 25 Sep 2016, In : International Journal of Pharmaceutics. 511, 2, p. 840-854 14 p.

Research output: Contribution to journalArticle

NANEX: Process design and optimization

Baumgartner, R., Matic, J., Schrank, S., Laske, S., Khinast, J. & Roblegg, E., 14 Apr 2016, In : International Journal of Pharmaceutics. 506, p. 35-45 10 p.

Research output: Contribution to journalArticle

Printing medicines as orodispersible dosage forms: Effect of substrate on the printed micro-structure

Planchette, C., Pichler, H., Wimmer-Teubenbacher, M., Gruber, M., Gruber-Wölfler, H., Mohr, S., Tetyczka, C., Hsiao, W. K., Paudel, A., Roblegg, E. & Khinast, J., 2016, In : International Journal of Pharmaceutics. p. 518-527

Research output: Contribution to journalArticle

Renewable energy from wastewater - Practical aspects of integrating a wastewater treatment plant into local energy supply concepts

Kollmann, R., Neugebauer, G., Kretschmer, F., Truger, B., Kindermann, H., Stoeglehner, G., Ertl, T. & Narodoslawsky, M., 1 Sep 2016, In : Journal of cleaner production.

Research output: Contribution to journalArticle

Open Access
File

Sensitivity analysis of a pharmaceutical tablet production process from the control engineering perspective

Rehrl, J., Gruber, A. F., Khinast, J. & Horn, M., 30 Nov 2016, In : International Journal of Pharmaceutics. 517, 1-2, p. 373-382 10 p.

Research output: Contribution to journalArticle

Separation of Cellulose Fibres from Pulp Suspension by Froth Flotation Fractionation

Redlinger-Pohn, J. D., Grabner, M., Zauner, P. & Radl, S., 1 Sep 2016, In : Separation and purification technology. 169, p. 304-313

Research output: Contribution to journalArticle

Open Access
File

Simulating Wet Gas-Solid Fluidized Beds Using Coarse-Grid CFD-DEM

Girardi, M., Radl, S. & Sundaresan, S., 29 Jan 2016, In : Chemical Engineering Science. 144, p. 224–238 15 p.

Research output: Contribution to journalArticle

Open Access
File
Open Access

Speicherung mit Phasenwechslern

Schranzhofer, H., Moser, C., Englmair, G. & Furbo, S., Nov 2016, In : Der österreichische Installateur. 11/2016, p. 50-51 2 p.

Research output: Contribution to journalArticle

Suzuki-Miyaura coupling reactions using novel metal oxide supportedionic palladium catalysts

Lichtenegger, G. J., Maier, M. C., Hackl, M., Khinast, J., Gössler, W., Griesser, T., Phani Kumard, V. S., Gruber-Wölfler, H. & Deshpande, P. A., 1 Nov 2016, In : Journal of molecular catalysis / A. 426, p. 39-51

Research output: Contribution to journalArticle

The effect of Dean Flow in a tube flow fractionation device

Jagiello, L. A., Redlinger-Pohn, J. D., Fischer, W. J., Eckhart, R. & Bauer, W., 2016, In : Nordic Pulp & Paper Research journal. 31, 4, p. 641-647

Research output: Contribution to journalArticle

The Plug & Play Reactor: A Highly Flexible Device for Heterogeneous Reactions in Continuous Flow

Lichtenegger, G. J., Turšič, V., Kitzler, H., Obermaier, K., Khinast, J. & Gruber-Wölfler, H., 27 Jul 2016, In : Chemie - Ingenieur - Technik. 88, 10

Research output: Contribution to journalArticle

The Virtual Sandbox: Forschendes Lernen am Beispiel der Partikelphysik

Reichel, E., Redlinger-Pohn, J. D., Wu, M., Ecker, K., Wachtler, L., Bahar, B., Khinast, J., Eck, J. & Radl, S., 2016, In : Plus lucis. 3/2016, p. 43-47

Research output: Contribution to journalArticle

2015

Accuracy of micro powder dosing via a vibratory sieve–chute system

Besenhard, M., Faulhammer, E., Fathollahi, S., Reif, G., Calzolari, V., Biserni, S., Lawrence, S., Llusa, M. & Khinast, J., 2015, In : European journal of pharmaceutics and biopharmaceutics. 94, p. 264-272

Research output: Contribution to journalArticle

Alcohol dose dumping: The influence of ethanol on hot-melt extruded pellets comprising solid lipids

Jedinger, N., Schrank, S., Mohr, S., Feichtinger, A., Khinast, J. & Roblegg, E., 2015, In : European journal of pharmaceutics and biopharmaceutics. 92, p. 83-95

Research output: Contribution to journalArticle

Calibration-free in-line monitoring of pellet coating processes via optical coherence tomography

Markl, D., Zettl, M., Hannesschläger, G., Sacher, S., Leitner, M., Buchsbaum, A. & Khinast, J., 2015, In : Chemical Engineering Science. 125, p. 200-208

Research output: Contribution to journalArticle