Research Output 1987 2019

Filter
Conference contribution
Conference contribution

10.1 - A novel approach to quantify the spatial coating layer formation

Kritzinger, J., Bauer, W., Salminen, P. & Preston, J., 2010, 11th Advanced Coating Fundamentals Symposium Proceedings: The Latest Advances in Coating Research and Development. p. 372-383 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

coatings
Coatings
curtains
blades
topography

3D-Analytik der Interaktion von Rohpapier und Strich

Kritzinger, J., Wind, E., Hirn, U. & Bauer, W., 2010, PTS-Seminar AM1065 Moderne analytische Methoden in der Papiertechnik. ., p. 10.1-10.2

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

3D Segmentation by Maximally Stable Volumes (MSVs)

Donoser, M. & Bischof, H., 2006, Proceedings of 18th International Conference on Pattern Recognition. ., p. 63-66 (Volume I).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A comparison of five optical surface topography measurement methods

Mettänen, M. & Hirn, U., 2014, PTS Paper & Imaging Symposium CP 1410. ., p. 1-2

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A memory effect in sheet-fed offset printing

Fuchs, W., Dauer, M., Hirn, U. & Bauer, W., 2017, Paper Conference and Trade Show, PaperCon 2017: Renew, Rethink, Redefine the Future. p. 1098 1106 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

File

A Memory Effect in Sheet-Fed-Offset Printing

Fuchs, W., Dauer, M., Hirn, U. & Bauer, W., 2015, IARIGAI International Research Conference. ., p. 13-23

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Method to Determine Fiber Wall Damage Induced by Refining

Eckhart, R., Hirn, U. & Bauer, W., 2006, Progress in Paper Physics Seminar. ., p. 30-34

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

A method to determine the degree of weakening of the outer fiber wall layers by image analytical evaluation of forced fiber swelling

Eckhart, R., Hirn, U. & Bauer, W., 2007, COST Action E54; Characterisation of the fine structure and properties of papermaking fibers using new technologies; Opening Seminar. ., p. 59-63

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

A Model Approach to Understand the Fiber – Fiber Bond in Paper

Schennach, R., Hirn, U., Horvath, E., Schmied, F. & Teichert, C., 2011, Progress in Paper Physics Seminar 2011 Conference Proceedings. Graz: Verlag der Technischen Universität Graz, p. 211-213

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

A New Automated Microtomy Concept for 3D Paper Structure Analysis

Donoser, M., Wiltsche, M. & Bischof, H., 2005, Proc. of 9th IAPR Conference on Machine Vision Applications. ., p. 76-79

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A New Burnout Test for Wood Containing Papers

Trimmel, M., Hirn, U. & Bauer, W., 2012, Book of Abstracts. Stockholm: ., p. 121-124

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

A New Slice-Based Concept for 3D Paper Structure Analysis Applied to Spatial Coating Layer Formation

Wiltsche, M., Donoser, M., Bauer, W. & Bischof, H., 2005, Advances in Paper Science and Technology. The Pulp and Paper Fundamental Research Society, p. 853-899

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

An Image Analytical Method to measure Size and Number of Vessels in Pulp Suspensions

Hirn, U. & Bauer, W., 2004, Proceedings 31st International Papermakers Symposion Slovenia (DITP). ., p. X-X

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

An interdisciplinary view on the strength of a fiber – fiber bond in paper

Gilli, E., Schmied, F., Teichert, C., Hirn, U., Kappel, L., Bauer, W. & Schennach, R., 2009, Workshop on single fiber testing and modeling. ., p. 12-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Novel Approach to Quantify the Sapital Coating Layer Formation

Kritzinger, J., Bauer, W., Salminen, P. & Preston, J., 2010, Proceedigns of 14th TAPPI Advanced Coating Fundamentals Symposium. ., p. 372-383

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A NOVEL LABORATORY DEVICE FOR MEASUREMENT OF RETENTION, DEWATERING AND FLOCCULATION BEHAVIOR

Trimmel, M., Eckhart, R. & Bauer, W., 2013, Book of Abstracts - 40th INTERNATIONAL ANNUAL SYMPOSIUM DITP. ., p. 59-59

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Novel Method for the Analysis of Fiber-to-Fiber Bonded Area

Kappel, L., Hirn, U. & Bauer, W., 2008, International Annual Symposium DITP. ., p. 37-37

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Anwendung der Polarisationsmikroskopie zur Bestimmung von Faser-Faser-Bindeflächen

Kappel, L., Hirn, U., Bauer, W. & Schennach, R., 2009, Österreichischen Papierfachtagung - Kurzfassungen der Vorträge. ., p. 16-16

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Application of a fast Numerical Gröbner Bases Implemementation in Kinematic Synthesis

Hirn, U. & Dietmaier, P., 1999, 10th World Congress on the Theory of Mechanisms and Machines (IFToMM). ., p. 174-179

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Application of an Automated Microtomy Method in the Tracking of Fibres in 3D Paper Structures

Wiltsche, M., Bauer, W. & Donoser, M., 2007, COST Action E54; Characterisation of the fine structure and properties of papermaking fibers using new technologies; Opening Seminar. Eigenverlag, p. 53-57

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Application of a Novel Automated Serial Sectioning Technique in the 3D Analysis of Paper Structures

Kritzinger, J., Wiltsche, M., Donoser, M. & Bauer, W., 2009, Proceedings Microscopy09. Graz: Verlag der Technischen Universität Graz, Vol. Volume 1. p. 83-84 (MC2009 Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Application of Modified Cationic Pseudoboehmite Nanoparticles in Coating Colours

Petscharnig, C. & Bauer, W., 2009, (Accepted/In press) Proceedings 24th PTS Coating Symposium 2009. München: PTS

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Probabilistic Approach for Tracking Fibers

Donoser, M., Mauthner, T., Kritzinger, J. & Bischof, H., 2008, (Accepted/In press) Proceedings of the International Conference on Pattern Recognition (ICPR). .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A qauntitative analysis of different fiber-fiber bonding mechanisms

Hirn, U. & Schennach, R., 2014, Progress in Paper Physics Seminar. ., p. NA-NA

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Assessing the refining process via a novel method for evaluating mechanical damage to the outer fibre wall layers

Eckhart, R., Hirn, U. & Bauer, W., 2005, PTS Faserstoff Symposium 2005. München: PTS 2005, Vol. PTS Symposium FS503. p. 16.1-16.10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Assessing the Role of Polymer Molecular Weight for High-Performance Indacenodithiophene-Based Fullerene-Free Organic Solar Cells

Höfler, S. F., Rath, T., Hobisch, M., Pastukhova, N., Pavlica, E., Bratina, G., Scheunemann, D., Wilken, S. & Trimmel, G., 2018, Hybrid & Organic Photovoltaics (HOPV18).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Statistical Approach to the Modelling of Ink transmission on Flexo Printed Sack Paper

Feirer, V., Hirn, U., Friedl, H. & Bauer, W., 2011, Advances in Printing and Media Technology Vol. XXXVIII. 1 ed. Darmstadt, Germany: ., p. 93-102

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Statistical Prediction of Uncovered Areas in Flexo Printed Kraft Paper using Paper Topography

Feirer, V., Hirn, U. & Bauer, W., 2009, The Future Needs of the Paper Industry - Proceedings. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

A study of the influence of pre- and post-calendering on the structural parameters of a coating layer applied with a curtain coater

Kritzinger, J. & Bauer, W., 2012, Paper Conference and Trade Show 2012, PaperCon 2012: Growing the Future - Co-located with Control Systems 2012. Vol. 2. p. 748-757 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Barrier Coating of Paperboard

Kopacic, S., Bauer, W., Walzl, A., Kniely, R. & Zankel, A., 14 Nov 2018, DITP .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Barrier Coating using Biopolymers

Kopacic, S., Walzl, A., Bauer, W. & Leitner, E., 5 Apr 2018, Minisymposium VT.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Beurteilung von Faserzuständen mittels neuer Bildanalysemethoden

Kramer, M., Hirn, U., Eibinger, K., Eichinger, R. & Stark, H., 2000, 14. PTS Symposium Chemische Technologie der Papierherstellung 2000. München: PTS, p. 40-1B-40-16

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Bildgebende Verfahren angewandt auf die räumliche Analyse der Papierstruktur

Hirn, U., Wiltsche, M. & Lechthaler, M., 2005, Moderne Oberflächenanalytik und bildgebende Verfahren. München: ., p. 10.1-10.16 (PTS Manuskript OA 529).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Biopolymers Barrier Coatings for Paper-based Food Packaging Materials

Kopacic, S. & Bauer, W., 26 Apr 2017, Matbim .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characterization and influence of fungal growth on beech wood used for the production of Dissolving Pulp

Gradinger, C., Messner, K., Promberger, A. & Sixta, H., 2003, 12th International Symposium on Wood and Pulping Chemistry, Vol.II. ., Vol. Vol. II. p. 27-30

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characterization of cellulose fiber surfaces

Schmied, F., Teichert, C., Kappel, L., Hirn, U. & Schennach, R., 2007, Jahrestagung der Österreichischen Physikalischen Gesellschaft. ., p. 111-111

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characterization of fines quality and their independent effect on sheet properties

Mayr, M., Eckhart, R., Bauer, W. & Thaller, A., 4 Sep 2017, ADVANCES IN PULP AND PAPER RESEARCH, OXFORD 2017: Transactions of the 16th Fundamental Research Symposium. Batchelor, W. & Söderberg, D. (eds.). The Pulp and Paper Fundamental Research Society, p. 299-322 23 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Characterization of pulp fiber fines and their technological properties

Mayr, M., 2015, Cellulose Materials Doctoral Students Summer Conference 2015. Helsinki: Science + Technology, Vol. 10. p. 38-41

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Characterization of spatial coating layer formation - definition of a representative sample size

Kritzinger, J., Hirn, U., Donoser, M. & Bauer, W., 19 Dec 2008, TAPPI Advanced Coating Fundamentals Symposium Proceedings. p. 340-351 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Coatings
Experiments

Coating Application Method and Calendering Influence on the Spatial Coating Layer Formation Obtained by an Automated Serial Sectioning Method

Wiltsche, M., Bauer, W. & Donoser, M., 2006, TAPPI Advanced Coating Fundamentals Symposium. Atlanta: Tappi Press, p. 413-425

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Color Blob Segmentation by MSER Analysis

Donoser, M., Bischof, H. & Wiltsche, M., 2006, Proc. of International Conference on Image Processing. ., p. 757-760

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Combined Effect of the Morphology and Rate of Addition of Fine Cellulosic Materials Produced from Chemical Pulp on Paper Properties

Bossu, J., Czibula, C. V., Winter, A., Gindl-Altmutter, W., Eckhart, R., Zankel, A. & Bauer, W., May 2019, Proceedings of the International Paper Physics Conference 2019: Held in conjunction with PaperCon 2019, May 5-8, 2019, Indianapolis. Tappi Press, p. 247-259 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

File
Chemical pulp
Cellulose
Air permeability
Mechanical properties
Papermaking

Comparative AFM and SEM investigations on kraft pulp fiber surfaces

Schmied, F., Teichert, C., Kappel, L., Hirn, U., Schennach, R. & Schröttner, H., 2009, Instrumentation and Methodology. Wien: Facultas, p. 299-300

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Contact Angle and Related Measurements - Insights into Paper Surface Characterization

Krolle, A. & Bauer, W., 2012, 12th TAPPI Advanced Coating Fundamentals Symposium Proceedings. Norcross, GA 30092: Tappi Press, p. 84-98

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Context-Sensitive Decision Forests for Object Detection

Kontschieder, P., Rota Bulò, S., Criminisi, A., Kohli, P., Pelillo, M. & Bischof, H., 2012, (Accepted/In press) Annual Conference on Neural Information Processing Systems. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Detecting, Tracking and Recognizing License Plates

Donoser, M., Arth, C. & Bischof, H., 2007, Proceedings of Asian Conference on Computer Vision. ., p. 447-456

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Detecting paper fibre cross sections in microtomy images

Kontschieder, P., Donoser, M., Bischof, H., Kritzinger, J. & Bauer, W., 2010, Proceedings for ICPR 2010. ., p. 316-319 4 p. 5597795

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Fibers
Cellulose
Experiments

Determination of Repulpability of Talc-Filled Biopolymer Dispersion Coatings and Optimization of Repulped Reject for Improved Material Efficiency by Tailoring Coatings

Ovaska, S-S., Mielonen, K., Lyytikäinen, J., Hirn, U. & Backfolk, K., 2017, Tappi PaperCon 2017 Proceedings. p. 36-48

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

File

Determination of the influence of penetration on rotogravure printability with newly developed methods

Kappel, C., Enzi, S., Hirn, U. & Eichinger, R., 2006, International Meeting of Slovene Paper Industry. ., p. x-x

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Determining pulp heat of sorption from isotherm models and calorimeter measurements

Leuk, P., Schneeberger, M. & Hirn, U., 2015, Tokyo Paper 2015, Internationl Paper Physics and Paper Chemistry Conference. ., p. 100-100

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review