Research Output 1987 2019

Filter
Conference contribution
2019

Combined Effect of the Morphology and Rate of Addition of Fine Cellulosic Materials Produced from Chemical Pulp on Paper Properties

Bossu, J., Czibula, C. V., Winter, A., Gindl-Altmutter, W., Eckhart, R., Zankel, A. & Bauer, W., May 2019, Proceedings of the International Paper Physics Conference 2019: Held in conjunction with PaperCon 2019, May 5-8, 2019, Indianapolis. Tappi Press, p. 247-259 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

File
Chemical pulp
Cellulose
Air permeability
Mechanical properties
Papermaking

Primary Fines and their Positive Influence on Energy Consumption during Refining with Regard to Strength Development for Softwood Kraft Pulp

Mandlez, D., Zangl-Jagiello, L., Eckhart, R. & Bauer, W., May 2019, International Paper Physics Conference. Indianapolis: Tappi Press, p. 241-246 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Kraft pulp
Softwoods
Refining
Tensile strength
Energy utilization
2018

Assessing the Role of Polymer Molecular Weight for High-Performance Indacenodithiophene-Based Fullerene-Free Organic Solar Cells

Höfler, S. F., Rath, T., Hobisch, M., Pastukhova, N., Pavlica, E., Bratina, G., Scheunemann, D., Wilken, S. & Trimmel, G., 2018, Hybrid & Organic Photovoltaics (HOPV18).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Barrier Coating of Paperboard

Kopacic, S., Bauer, W., Walzl, A., Kniely, R. & Zankel, A., 14 Nov 2018, DITP .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Barrier Coating using Biopolymers

Kopacic, S., Walzl, A., Bauer, W. & Leitner, E., 5 Apr 2018, Minisymposium VT.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Functional Barrier Coating and Surface Sizing using Biopolymers

Kopacic, S., 15 Oct 2018, CEPI Paper and Beyond.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Laboratory simulation of paper mechanical response during high-speed inkjet printing

Lahti, J. A., Kouko, J. & Hirn, U., 2018, Progress in Paper Physics Seminar 2018.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Relaxation enhancement in selected Bismuth-Aryl compounds: Promising precursors for novel T1 MRI contrast agents

Scharfetter, H., Gösweiner, C., Umut, E., Sampl, C., Fischer, R., Spirk, S., Petrovic, A. & Kruk, D., Jun 2018, Proc. Intl. Soc. Mag. Reson. Med. 2018.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Unraveling the Molecular Weight Dependence of PTB7-Th for High-Performance Indacenodithiophene-Based Fullerene-Free Organic Solar Cells

Höfler, S. F., Hobisch, M., Pastukhova, N., Pavlica, E., Scheunemann, D., Wilken, S., Rath, T. & Trimmel, G., 2018, Book of Abstracts, DocDays 2018.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2017

A memory effect in sheet-fed offset printing

Fuchs, W., Dauer, M., Hirn, U. & Bauer, W., 2017, Paper Conference and Trade Show, PaperCon 2017: Renew, Rethink, Redefine the Future. p. 1098 1106 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

File

Biopolymers Barrier Coatings for Paper-based Food Packaging Materials

Kopacic, S. & Bauer, W., 26 Apr 2017, Matbim .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characterization of fines quality and their independent effect on sheet properties

Mayr, M., Eckhart, R., Bauer, W. & Thaller, A., 4 Sep 2017, ADVANCES IN PULP AND PAPER RESEARCH, OXFORD 2017: Transactions of the 16th Fundamental Research Symposium. Batchelor, W. & Söderberg, D. (eds.). The Pulp and Paper Fundamental Research Society, p. 299-322 23 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Determination of Repulpability of Talc-Filled Biopolymer Dispersion Coatings and Optimization of Repulped Reject for Improved Material Efficiency by Tailoring Coatings

Ovaska, S-S., Mielonen, K., Lyytikäinen, J., Hirn, U. & Backfolk, K., 2017, Tappi PaperCon 2017 Proceedings. p. 36-48

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

File

Development and performance of enzymatically modified lignosulfonates as coating binders

Hofer, K., Ortner, A., Winter, H., Nyanhongo, G. S., Mahler, K., Guebitz, G. M. & Bauer, W., 23 Apr 2017, Paper Conference and Trade Show, PaperCon 2017: Renew, Rethink, Redefine the Future. Tappi Press, Vol. 2. p. 986-994 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

lignosulfonates
Lignin
coatings
lignin
Binders

Fiber-Fiber Bond Formation and Failure: Mechanisms and Analytical Techniques

Hirn, U. & Schennach, R., 2017, Advances in pulp and paper research, Oxford 2017: 16th Fundamental Research Symposium, Oxford, September 2017. The Pulp and Paper Fundamental Research Society, Vol. 2. p. 839 - 863

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

File

Fractionation of Fibre Pulp in a Hydrodynamic Fractionation Device: Influence of Reynolds Number and Accept Flow Rate

Redlinger-Pohn, J. D., Bauer, W. & Radl, S., 8 Sep 2017, Proceedings of the 16th Fundamental Research Symposium "Advances in Pulp and Paper Research". Oxford, Vol. 1. p. 209-228 (Fundamental Research Symposium).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Investigating the transversal viscoelastic properties of paper fibers by atomic force microscopy

Czibula, C. M., Ganser, C., Tscharnuter, D., Schöberl, T., Teichert, C. & Hirn, U., 2017, The issues in mechanics of pulp and paper materials. Arkhangelsk, p. 74-79

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

LINKING PAPER STRUCTURE TO LOCAL DISTRIBUTION OF DEFORMATION AND DAMAGE

Lahti, J. A., Dauer, M., Keller, D. S. & Hirn, U., Sep 2017, Advances in pulp and paper research, Oxford 2017: 16th Fundamental Research Symposium, Oxford. p. 669-682 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

damage
temperature
energy dissipation
distribution
method

Measuring the oil and grease barrier properties of MFC coated paper using ultrasonic signal variation

Padberg, J., Bauer, W. & Gliese, T., 7 Jun 2017, TAPPI International Conference on Nanotechnology for Renewable Materials 2017. Tappi Press, Vol. 2. p. 702-717 16 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Silver Nanowires: A Versatile Tool for Conductive Paper

Czibula, C. M., Ganser, C., Kratzer, M., Brumbauer, F., Kräuter, M., Hirber, M., Shanmugam, K., Batchelor, W., Penn, M., Ebner, M., Pramstrahler, M., Pilat, F., Chien, H-T., Schennach, R., Friedel, B. & Teichert, C., 2017, Advances in Pulp and Paper Research. Oxford, Vol. Vol. 2. p. 723-737

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Estimating the area in molecular contact using Förster resonance energy transfer microscopy (FRET)

Urstöger, G. J., Schennach, R. & Hirn, U., 2016, Progress in Paper Physics Seminar 2016. p. 241-244

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Exploring Paper/AgNW based composites for photovoltaic devices by atomic force microscopy methods

Czibula, C., Ganser, C., Kratzer, M., Schennach, R., Friedel, B. & Teichert, C., 2016, Progress in Paper Physics Seminar 2016 Conference Proceedings. p. 213-216 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Fines separation and thickening in the lab scale by means of screening and microbubble flotation

Jagiello, L. A., Fischer, W. J., Eckhart, R. & Bauer, W., 2016, Progress in Paper Physics Seminar 2016 Conference Proceedings. Darmstadt, p. 77-83

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of different realtive humidity on the strength of individual hardwood and softwood fibres and joints

Jajcinovic, M., Fischer, W. J., Hirn, U. & Bauer, W., 2016, Progress in Paper Physics Seminar 2016. p. 174 179 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Novel smart MRI contrast agents based on nuclear quadrupole cross relaxation – pre-selection of promising compounds

Gösweiner, C., Fischer, R., Schlögl, M., Kruk, D., Petrovic, A., Spirk, S. & Scharfetter, H., 2016, ESMRMB 2016 Congress: Book of Abstracts Saturday. Berlin Heidelberg: Springer Berlin, p. 371 372 p. 400. (Magnetic Resonance Materials in Physics, Biology and Medicine; vol. 29).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Volume under Load model for Evaluating Wet Pressing Performance

Leuk, P., Dauer, M. & Hirn, U., 2016, Progress in Paper Physics Seminar 2016 Conference Proceedings . p. 96-97 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2015

A Memory Effect in Sheet-Fed-Offset Printing

Fuchs, W., Dauer, M., Hirn, U. & Bauer, W., 2015, IARIGAI International Research Conference. ., p. 13-23

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characterization of pulp fiber fines and their technological properties

Mayr, M., 2015, Cellulose Materials Doctoral Students Summer Conference 2015. Helsinki: Science + Technology, Vol. 10. p. 38-41

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Determining pulp heat of sorption from isotherm models and calorimeter measurements

Leuk, P., Schneeberger, M. & Hirn, U., 2015, Tokyo Paper 2015, Internationl Paper Physics and Paper Chemistry Conference. ., p. 100-100

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Determining the breaking load of individual fiber-fiber joints by means of different testing devices

Jajcinovic, M., Saketi, P., Fischer, W. J., Bauer, W. & Kallio, P., 2015, COST ACTION FP1105. Understanding wood cell wall structure, biopolymer interaction and composition: implications for current products and new materials. ., p. 17-19

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Effect of local paper properties on xerographic print mottle

Fuchs, W., Dauer, M., Hirn, U. & Bauer, W., 2015, Tokyo Paper 2015, Internationl Paper Physics and Paper Chemistry Conference. ., p. 97-97

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Evaluating Time Stability of Print Mottle Patterns in Sheet Fed Offset Printing

Fuchs, W., 2015, Cellulose Materials Doctoral Students Summer Conference. Helsinki: Unigrafia Oy, p. na-na

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Fast Evaluation of Spatial Coating Layer Formation using UV Scanner Imaging

Fuchs, W., Hirn, U., Bauer, W. & Keller, D. S., 2015, PAPERCON 2015 Conference Proceedings. ., p. na-na

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Fractionated treatment and separate refining as a way to reduce energy consumption in stock preparation

Giner Tovar, R., Fischer, W. J., Eckhart, R. & Bauer, W., 2015, 11. Minisymposium Verfahrenstechnik. ., p. 14-18

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Implementierung eines Tube Flow Fraktionierers

Jagiello, L. A., Fischer, W. J., Eckhart, R. & Bauer, W., 2015, 11. Minisymposium Verfahrenstechnik. ., p. 181-185

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Innovative tools for bio-resource utilisation in the regional context

Narodoslawsky, M., Maier, S., Kollmann, R. & Eder, M., 2015, Conference on Sustainable Development of Energy, Water and Environment Systems. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigating mechanical properties of softwood fibre to fibre joints

Jajcinovic, M., Fischer, W. J. & Bauer, W., 2015, 11. Minisymposium Verfahrenstechnik. ., p. 186-190

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Mechanical properties of hardwood fibres and fibre to fibre bonds

Jajcinovic, M., Fischer, W. J., Hirn, U. & Bauer, W., 2015, 18th ISWFPC International Symposium on Wood, Fiber and Pulping Chemistry. ., p. 11-14

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Mechanical properties of indiviual cellulose fibres and fibre to fibre bonds

Fischer, W. J., Jajcinovic, M., Hirn, U. & Bauer, W., 2015, BOOK OF ABSTRACTS "Polysaccharides and polysaccharide-based advanced materials: from science to industry". ., p. 59-59

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Morphological characterization of pulp fines - Evaluation of optical methods

Mayr, M., Fischer, W. J., Eckhart, R. & Bauer, W., 2015, 18th ISWFPC Internation Symposium on Wood, Fiber and Pulping Chemistry. ., p. 15-17

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Wall effect of Solid liquid filter test on filter up-scaling

Giner Tovar, R. & Krammer, G., 2015, Filtech Europa International Conference and Exhibition. ., p. L2P511-L2P5110

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

White water recirculation as a means to evaluate fines properties

Giner Tovar, R., Fischer, W. J., Eckhart, R. & Bauer, W., 2015, Cellulose materials doctoral students summer conference 2015. ., p. 145-149

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2014

A comparison of five optical surface topography measurement methods

Mettänen, M. & Hirn, U., 2014, PTS Paper & Imaging Symposium CP 1410. ., p. 1-2

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A qauntitative analysis of different fiber-fiber bonding mechanisms

Hirn, U. & Schennach, R., 2014, Progress in Paper Physics Seminar. ., p. NA-NA

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Determining the Coating Layer Distribution on Paper using UV Scanner Imaging

Fuchs, W., Hirn, U., Bauer, W. & Keller, D. S., 2014, Progress in Paper Physics Seminar. ., p. NA-NA

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Experimental Filtration Study of Wood Fibres

Flitsch, J., Chen, Z. & Bauer, W., 2014, Proceedings 10. Minisymposium Verfahrenstechnik. Wien: Technische Universität Wien, p. 128-131

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of Print Unevenness in Sheet Fed Offset Printing

Fuchs, W., 2014, Cellulose Materials Doctoral Students Summer Conference. ., p. na-na

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Measured and calculated bending stiffness of individual fibers

Fischer, W. J., Lorbach, C., Jajcinovic, M., Hirn, U. & Bauer, W., 2014, Progress in Paper Physics. ., p. NA-NA

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

New Insights in the Bonding Mechanisms between Paper Fibers

Schennach, R. & Hirn, U., 2014, New Congress Materials Science and Engineering. ., p. na-na

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Serial sectioning of fluorescent coating layers as a tool to analyze binder penetration

Hofer, K., Ortner, A., Nyanhongo, G. S., Winter, H., Gübitz, G. & Bauer, W., 2014, 13th TAPPI Advanced Coating Fundamentals Symposium 2014. Tappi Press, p. 206-214 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review