• 8010

    Kopernikusgasse 24 Graz

    Austria

Research Output 1992 2019

Filter
(Old data) Lecture or Presentation
2012

Mechanical Properties and Microstructure of Friction Stir Welded Multilayered Steel

Tändl, J., Nambu, S., Inoue, J., Enzinger, N. & Koseki, T., 9 Jul 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Microstructure evolution of allotropic materials during thermomechanical processing

Poletti, M. C., Warchomicka, F., Dikovits, M. & Großeiber, S., 19 Jan 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Mikrostruktur in der Wärmeeinflusszone von 9% Chromstählen

Halici, D., Reichmann, K., Mayr, P. & Sonderegger, B., 2 Feb 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Mikrostrukturmodellierung von Ti-6Al-4V während der thermomechanischen Behandlung mittels zellularem Automaten

Krumphals, A. & Sommitsch, C., 4 May 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling of two-phase grain structure in Ti-6Al-4V by using cellular automata

Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 15 Oct 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling of two-phase grain structure in Ti-6Al-4V by using cellular automata

Krumphals, A., Stockinger, M. & Sommitsch, C., 10 Sep 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung der Kinetik von Korn- und Phasengrenzen im Zweiphasengebiet von Ti-6Al-4V zur Vorhersage der Kornvergröberung mittels zellularem Automaten

Krumphals, A., Sommitsch, C., Stockinger, M. & Warchomicka, F., 16 Apr 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulation der Produktion von Nahtlosrohren entlang der Prozesskette

Timoshenkov, A., Sommitsch, C. & Klarner, J., 4 May 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Simulation of Microstructure development during Brazing of Copper

Hütter, A. & Enzinger, N., 27 Feb 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Studies on hot deformation of titanium aluminides

Halici, D., Poletti, M. C., Stockinger, M. & Huber, D., 15 Nov 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Systematical research on welding parameters of the linear friction welding process

Löffelmann, J., Mucic, K., Fuchs, F. & Enzinger, N., 11 Sep 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Welded aluminium and magnesium alloys - corrosion and mechanical properties for refrigeration compressors in comparison with deep-drawing steel

Vallant, R. & Kerschbaumer, K. G., 16 Oct 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Zelluläre Automaten als Werkzeug zur Abbildung komplexer Systeme – Rekristallisation

Timoshenkov, A., Sommitsch, C. & Klarner, J., 12 Apr 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

„Russian Way“ and Metallurgy

Timoshenkov, A., Sommitsch, C. & Klarner, J., 6 Dec 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2011

ADVANCED CREEP RESISTANT MARTENSITIC STEELS

Sommitsch, C., Mayr, P., Schlacher, C., Kobayashi, M. & Toda, H., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Analysis of material flow and stresses in a rolling mill for seamless tubes

Timoshenkov, A., Sommitsch, C. & Klarner, J., 30 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Aspects on the Joinability for Advanced Designs

Cerjak, H-H. & Enzinger, N., 3 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Deformation and distortion induced by pneumatic impact treatment (PIT) in a welded joint for HS steel

Rahman, M. M., Enzinger, N. & Sommitsch, C., 6 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Ein Verformungsmodell für das Rohrwalzen in hintereinanderliegenden Dreiwalzenkalibern

Timoshenkov, A., Sommitsch, C. & Klarner, J., 21 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Electron beam welding of a TMCP steel with 700 MPa yield strength

Maurer, W., Ernst, W., Rauch, R., Kapl, S., Pohl, A., Krüssel, T., Vallant, R. & Enzinger, N., 15 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Electron beam welding of a TMCP steel with 700 MPa yield strength

Maurer, W., Ernst, W., Rauch, R., Kapl, S., Pohl, A., Krüssel, T., Vallant, R. & Enzinger, N., 17 Jul 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Entwicklung eines borlegierten 9%Cr Stahls für Hochtemperaturanwendungen

Mayr, P. & Schlacher, C., 25 Nov 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evolution of beta grain size during beta phase processing of Ti-6Al-4V

Krumphals, A., Stockinger, M., Sommitsch, C. & Warchomicka, F., 18 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Experience with creep tested 9Cr3W3CoVNbBN welded joints

Mayr, P., Schlacher, C., Mitsche, S. & Sommitsch, C., 11 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Friction Stir Welding of dissimilar material combinations

Figner, G., Weinberger, T., Schneider, C., Sommitsch, C., Enzinger, N. & Cerjak, H-H., 6 May 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Friction stir welding of magnesium and steel in car body engineering

Figner, G., Weinberger, T., Schneider, C., Sommitsch, C., Enzinger, N. & Cerjak, H-H., 12 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Fügetechnik am IWS

Enzinger, N. & Vallant, R., 5 May 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Impact of Mg, Cu and Si distribution on the microhardness of Al dendrites after casting, homogenization and continuous cooling of G-AlSi7MgCu0.5

Krumphals, F., Mittermayr, F., Gumpl Philipp, N. V., Stauder, B., Sommitsch, C. & Radis, R., 4 Oct 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Influence of temperature and strain rate on the softening processes in Allvac 718Plus

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Pölt, P., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Innovative Fügetechniken am Beispiel des Rührreibschweißens

Sommitsch, C. & Enzinger, N., 6 Oct 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

In-situ diffraction during deformation and synchrotron tomography of light alloys

Requena, G., Canelo Yubero, D., Fiedler, G., Garcés, G. & Poletti, M. C., 7 Sep 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Investigation of friction stir welding of stainless steel using a stop-action-technique

Pfeiffer, C., Weinberger, T., Enzinger, N., Schröttner, H. & Mitsche, S., 31 Jul 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Loss of ductility caused by AlN precipitates in Hadfield steel

Radis, R., Schlacher, C., Mayr, P., Enzinger, N., Kozeschnik, E. & Sommitsch, C., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Mikrostrukturmodellierung in Ti-6Al-4V während der thermo-mechanischen Behandlung

Krumphals, A. & Sommitsch, C., 4 Nov 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling of beta grain size during beta phase processing of Ti-6Al-4V

Krumphals, A., Sommitsch, C. & Stockinger, M., 17 Nov 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling particle distances of coherent prolate- and oblate-shaped precipitates in bcc systems

Sonderegger, B., Kozeschnik, E. & Sommitsch, C., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung und Simulation am Institut für Werkstoffkunde

Sonderegger, B., Pein, C., Zamani, H., Wachtler, C., Dikovits, M., Poletti, M. C., Krumphals, A., Krumphals, F., Timoshenkov, A., Kuduzovic, A. & Hadzic, S., 5 May 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung von Ausscheidungs – Abständen in komplexen Systemen

Sonderegger, B., Kozeschnik, E. & Sommitsch, C., 13 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerische Simulation von reibungsbasierten Fügeprozessen

Enzinger, N. & Sommitsch, C., 1 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Orbitalschweißen von Aluminiumrohren

Hütter, A., Lind, C. & Enzinger, N., 4 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Particle distance distributions and their effect on precipitate strengthening

Sonderegger, B., Holzer, I., Kozeschnik, E. & Sommitsch, C., 2 May 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Particle Distance Distributions and Their Effect on Precipitate Strengthening

Sonderegger, B., Holzer, I., Kozeschnik, E. & Sommitsch, C., 17 Jan 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Phase transformations during welding of 9Cr creep resistant steels

Mayr, P., Schlacher, C., Elmer, J. W., Palmer, T. A. & Koseki, T., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Research Activities in the field of Joining in Austria

Enzinger, N. & Cerjak, H-H., 18 May 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulation der Gefügeentwicklung während der Verarbeitung von Ti-6Al-4V im Zweiphasengebiet unter Verwendung von zellulären Automaten

Krumphals, A., Sommitsch, C. & Stockinger, M., 26 Feb 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulation of the Hot Forming Process: Application of a Fast Boundary Element Method

Messner, M., Weiß, W., Schanz, M. & Kolleck, R., 5 Sep 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Study of the transformation kinetics during hot rolling

Timoshenkov, A., Sommitsch, C. & Klarner, J., 6 Dec 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Warm forming of pre-aged AW6016 alloy for deep-drawing application

Kumar, M., Poletti, M. C. & Degischer, H. P., 5 Oct 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Wasserstoffinduzierte Kaltrissbildung bei hochfesten Stählen

Sommitsch, C. & Enzinger, N., 30 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch