• 8010

    Kopernikusgasse 24 Graz

    Austria

Research Output 1992 2019

Filter
(Old data) Lecture or Presentation
2015

Toughness Evaluation of Electron Beam Welds

Wiednig, C. A. & Enzinger, N., 10 Nov 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Toughness Evaluation of Electron Beam Welds

Wiednig, C. A. & Enzinger, N., 21 Sep 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Vorhersage der lokalen Warmrissbildung beim industriellen Stahlguss

Hadžić, S., Hanus, R. & Sommitsch, C., 23 Apr 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2014

An Innovative Approach of Joining Chains Using Linear Friction Welding

Enzinger, N., Fuchs, F. & Mucic, K., 9 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Automated measurement of near-surface plastic shear strain

Trummer, G., Six, K., Marte, C., Meierhofer, A. & Sommitsch, C., 8 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Beschreibung der Subkornmissorientierung in der Nähe von harten Teilchen von plastisch verformten Metallen

Loidolt, P., Ulz, M. H., Mitter, W. & Sommitsch, C., 12 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Challenges of deformation of two different materials under “extreme conditions”

Halici, D., Peter Loidolt, N. V., Bureau, R. & Poletti, M. C., 8 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Considerations for sound parameter studies in EBW of thick walled components

Wiednig, C. A., Enzinger, N. & Beal, C., 2 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Co-ordination of European Research in Structural Materials for Power Generation Equipment

Sommitsch, C., Vanstone, R., Kern, T-U., Bernard, P., Mayr, P., Thomson, R. & Agüero, A., 14 Sep 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Creep damage investigation of advanced martensitic 9Cr steel weldments for high temperature applications

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 7 Jul 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Creep properties and evolution of damage in advanced creep resistant martensitic steels

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 5 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Dissimilar Electron Beam Welding of Nickel base Alloy 625 and 9% Cr Steel

Wiednig, C. A., Lochbichler, C., Enzinger, N., Beal, C. & Sommitsch, C., 4 Feb 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Dissimilar Welding of the Creep Resistant Steels CB2 and P92 with Flux Cored Wires

Baumgartner, S., Schuler, M., Holy, A., Schnitzer, R. & Enzinger, N., 13 Jul 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

EBW Welding of Thick Components – Possibilities and Limits

Enzinger, N., Wiednig, C. A. & Loidolt, P., 5 Nov 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Entwicklung eines dreidimensionalen Materialmodells für Faser-Kunststoff-Verbunde mit Hilfe simulationsbegleitender Festigkeitsuntersuchungen an Fließformschraubverbindungen CFK-Aluminium

Szlosarek, R., Karall, T., Hahne, C., Berger, A., Meyer, N. & Enzinger, N., 18 Nov 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evaluation of the factors influencing the static strength of HAZ softened HSLA steel weld

Maurer, W., Ernst, W., Rauch, R., Vallant, R. & Enzinger, N., 13 Jul 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Experimental and Computational Aspects of Analytical Electron Tomography and its Application to Nanomaterials

Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C. & Kothleitner, G., 24 Sep 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Experimentelle und numerische Untersuchungen zum Stanzversagen von CFK

Szlosarek, R., Karall, T., Enzinger, N., Meyer, N., Hahne, C. & Berger, A., 25 Sep 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Finite element analysis of flow drill screw joints between fibre-reinforced plastics and aluminium by using user-materials for solid elements

Szlosarek, R., Karall, T., Hahne, C., Berger, A., Meyer, N. & Enzinger, N., 2 Jun 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Fracture angle search within Puck's 3D matrix failure criteria by using the damped Newton's method

Szlosarek, R., Karall, T., Hahne, C., Berger, A. & Enzinger, N., 2 Jun 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Friction stir welding at IWS

Hütter, A. & Enzinger, N., 2 Jul 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Friction welding and friction stir welding – an overview

Enzinger, N., Gao, Z., Hütter, A., Mucic, K., Pakkanen, J. A. & Sommitsch, C., 24 Feb 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Impact toughness of steel after electrochemical Hydrogenation

Freiberger, M. & Vallant, R., 23 Oct 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Investigation of the Al3(Sc,Zr) precipitation behavior of a novel AlMgScZr alloy

Tändl, J., Palm, F., Anders, K., Poletti, M. C. & Sommitsch, C., 25 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Investigation of the hot deformation behavior of an AlMgScZr alloy under plane strain condition

Tändl, J., Dikovits, M. & Poletti, M. C., 7 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Investigation of the precipitation kinetics of a new Al-Mg-Sc-Zr alloy

Tändl, J., Palm, F., Anders, K., Gradinger, R. & Poletti, M. C., 17 Jun 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling mechanical properties of 9% chromium weld metals

Enzinger, N., Schuler, M., Albu, M., Kutleša, P., Baumgartner, S. & Schnitzer, R., 13 Jul 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling mechanical properties of 9% chromium weld metals

Schuler, M., Baumgartner, S., Schnitzer, R. & Enzinger, N., 31 Mar 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerical modelling of the damage and failure behaviour of flow drill screw joints between fibre-reinforced plastics and aluminium

Szlosarek, R., Karall, T., Berger, A., Hahne, C., Meyer, N. & Enzinger, N., 21 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Optimized microstructure for an increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Paul, S., Zeiler, G. & Sommitsch, C., 11 Sep 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Rührreibschweißen von Leichtmetallen und MMCs

Sommitsch, C., Hütter, A., Pakkanen, J., Poletti, M. C., Tändl, J., Krpic, B., Ramskogler, C. & Enzinger, N., 6 Nov 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulation of compression of a γ-TiAl alloy in 2D

Halici, D., Guang, C., Huber, D., Stockinger, M. & Poletti, M. C., 27 Jan 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulation of the damage and failure behaviour of flow drill screw joints between fibre-reinforced plastics and aluminium by using user-materials

Szlosarek, R., Karall, T., Hahne, C., Berger, A., Meyer, N. & Enzinger, N., 9 Oct 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulation of the damage and failure behaviour of flow drill screw joints between FRP and metals by using user-materials

Karall, T., Szlosarek, R., Enzinger, N., Meyer, N., Hahne, C. & Berger, A., 15 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Studies on ductile damage and flow instabilities during hot deformation of a multiphase γ-TiAl alloy

Halici, D., Zamani, H. A., Poletti, M. C., Sommitsch, C., Stockinger, M. & Huber, D., 7 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Studies on ductile damage and flow instabilities in γ-TiAl

Halici, D., Guang, C., Zamani, H. A., Huber, D. & Poletti, M. C., 7 Feb 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Subjecting a novel AlMgScZr alloy to electron beam and friction stir processing

Tändl, J., Hütter, A. & Poletti, M. C., 16 Jul 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Subjecting a novel AlMgScZr alloy to electron beam and friction stir processing

Tändl, J., Hütter, A., Orthacker, A., Kothleitner, G. & Poletti, M. C., 5 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Thomography in Analytical Transmission Electron Microscopy of nanomaterials

Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C. & Kothleitner, G., 12 Oct 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Tomography in Analytical Transmission Electron Microscopy of Nanomaterials

Orthacker, A., Haberfehlner, G., Poletti, M. C., Tändl, J. & Kothleitner, G., 8 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Type IV cracking in advanced martensitic chromium steel

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 5 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2013

3D Simulation and Process Optimization of Laser Assisted Milling of Ti6Al4V

Zamani, H. A., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 13 Jun 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

3D Simulation of Laser Assisted Side Milling of Ti6Al4V Alloy using Modified Johnson-Cook Material Model

Zamani, H. A., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 22 Apr 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Advanced creep resistant martensitic steels: design, simulation and testing

Beal, C., Sommitsch, C., Schlacher, C., Plesiutschnig, E., Schuler, M. & Vujic, S., 10 Jul 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Advanced microstructures for increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Sommitsch, C., Mitsche, S., Paul, S. & Zeiler, G., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

An Innovative Approach of Joining AISI 316L Stainless Chains Using Linear Friction Welding

Mucic, K., Enzinger, N. & Fuchs, F., 7 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Calculation of hardness distribution in the HAZ of microalloyed steel

Rahman, M. M. & Enzinger, N., 14 Mar 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Calculation of hardness distribution in the HAZ of micro-alloyed steel

Rahman, M. M., Maurer, W., Ernst, W., Rauch, R. & Enzinger, N., 11 Sep 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Closed loop simulation of the chain "cold-forming - welding - crash load" for the prediction of the crash behavior of car body components

Kolleck, R., Auer, P., Schröder, M., Trattnig, G., Heller, D. & Walch, C., 7 May 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Creep investigation of CB2 joints using similar rutile CB2-flux cored wire

Schuler, M., Baumgartner, S., Schnitzer, R. & Enzinger, N., 11 Sep 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch