• 8010

    Inffeldgasse 11 Graz

    Austria

Research Output 1977 2019

Filter
Conference contribution
2014

Ein innovativer Ansatz für eine adaptive und prädiktive Betriebsstrategie für Plug-In Hybridfahrzeuge

Kraus, H., Ackerl, M., Karoshi, P., Fabian, J. & Ringdorfer, M., 2014, WKM Symposium 2014. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Evaluation of Angular Sensor Systems for Rotor Position Sensing of Automotive Electric Drives

Gächter, J., Fabian, J., Hirz, M., Schmidhofer, A. & Lanzenberger, H., 2014, (Accepted/In press) Smart Systems for Safe, Clean and Automated Vehicles. Berlin: VDI/VDE

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Friction Estimation – Optimization of Sensor Configuration with respect to RMSE and Costs

Kobialka, H-U. & Lex, C., 2014, 5th International Munich Chassis Symposium 2014. Springer Vieweg, Vol. 2. p. 741-755

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Future Trends of Advanced Power Electronics and Control Systems for Electric Vehicles

Fabian, J., Gächter, J. & Hirz, M., 2014, (Accepted/In press) Smart Systems for Safe, Clean and Automated Vehicles. Berlin: VDI/VDE

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Innovative Analysemethoden elektrifizierter Antriebsstränge zukünftiger Fahrzeuge

Ernst, M., Fabian, J. & Hirz, M., 2014, Symposium Energieinnovation. ., p. 408-408

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Integration of a Phenomenological Radar Sensor Modell in IPG CarMaker for Simulation of ACC and AEB systems

Eichberger, A., Bernsteiner, S., Magosi, Z. F. & Lindvai-Soos, D., 2014, Apply and Innovate. ., p. 1-23

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Life Cycle Assessment of urban mobility

Brunner, H., Hirz, M., Maurer, P. & Fabian, J., 2014, FISITA World Automotive Congress. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Measurement Systems in Battery-Electric and Hybrid Cars

Fabian, J., Lex, C., Hirz, M. & Brunner, H., 2014, (Accepted/In press) Intelligent transport to solve our future mobility, safety and environmental challenges. Curran Associates, Inc

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Electric batteries
Railroad cars
Propulsion
Sensors
Ground vehicles

Partial Discharge Detection of Electrical Devices at DC Voltage Stress

Fabian, J., Muhr, H. M. & Schichler, U., 2014, (Accepted/In press) Oil-Paper and Gas Insulated Systems in Components of Electrical Power Supply. Graz: .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Performance Analysis of Plug-In Hybrid Passenger Vehicles

Kraus, H., Ackerl, M. & Karoshi, P., 2014, FISITA 2014 World Congress. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Simulation-based method to adapt MF-Tyre model parameters to real road conditions

Kerschbaumer, A., Rudigier, M., Hirschberg, W. & Prezel, D., 2014, 5th International Munich Chassis Symposium 2014. Wiesbaden: Springer Vieweg, Vol. 2. p. 693-712 (chassis.tech plus).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

State of the Art and Future Trends of Electric Drives and Power Electronics for Automotive Engineering

Fabian, J., Hirz, M. & Krischan, K., 2014, (Accepted/In press) SAE World Congress. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Teilentladungserfassung an elektrischen Betriebsmitteln bei Gleichspannungsbeanspruchung

Fabian, J., Muhr, H. M. & Schichler, U., 2014, (Accepted/In press) Öl/Papier- und gasisolierte Systeme in Komponenten der elektrischen Energieversorgung. Graz: .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

The potential of new vehicle concepts for transport optimization and GHG emission reduction in urban areas

Brunner, H. & Hirz, M., 2014, (Accepted/In press) Sustainable Materials/Manufacturing. SAE International

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The use and future of biofuels

Aydogan, H., Hirz, M. & Brunner, H., 2014, 12th International Academic Conference, Prague. Prague: University of Economics, Prague, p. 1-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

Accuracy of Friction Estimation during Driving

Kobialka, H-U. & Lex, C., 2013, Conference Design of Experiments (DOE) in Engine Development. Renningen: expert verlag GmbH , p. 190-197 (Design of Experiments (DoE) in Engine Development).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Friction
Sensors
Recurrent neural networks
Tires
Time series

A contribution to advanced knowledge-based design in the development of complex mechanical products

Stadler, S. & Hirz, M., 2013, ICED13 - Design for Harmonies. ., p. 1-15

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A new approach for the reduction of aerodynamic drag of long-distance transportation vehicles

Hirz, M. & Stadler, S., 2013, SAE 2013 Commercial Vehicle Engineering Congress. SAE, p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Electrification of tractor trailer vehicles - Niche or Mainstream?

Ackerl, M., 2013, Hybrid and Electric Vehicles. ., p. 220-232

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Identification of the friction potential for the application in an automated emergency braking system

Lex, C., Kobialka, H-U. & Eichberger, A., 2013, 13th Stuttgart International Symposium Automotive and Engine Technology 2013. Wiesbaden: ATZ live, Vol. 2. p. 55-69

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Braking
Tires
Friction
Sensors
Recurrent neural networks

Integrated Approach for Geometric and Functional Validation of Vehicle Concepts in Initial Automotive Development

Mayr, J., Prenner, M., Hirz, M. & Rossbacher, P., 2013, NAFEMS World Congress - A World of Engineering Simulation. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Maßnahmen zur Optimierung des CAS/CAD/CFD-Prozesses in der konzeptionellen Fahrzeug-Aerodynamikentwicklung

Prenner, M., Hirz, M., Stadler, S. & Mayr, J., 2013, NAFEMS: Unterstützung der Konzeptfindung durch Simulationsmethoden. ., p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Phänomenologisches Radarsensormodell zur Simulation längsdynamisch regelnder Fahrerassistenzsysteme

Bernsteiner, S., Magosi, Z. F., Lindvai-Soos, D. & Eichberger, A., 2013, 16. Internationaler Kongress Elektronik im Fahrzeug. Düsseldorf: Springer-VDI-Verlag GmbH & Co.KG, Vol. 2188. p. 639-650 (VDI-Berichte).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Subjective Evaluation of Advanced Driver Assistance by Evaluation of Standardized Driving Maneuvers

Bernsteiner, S., Holl, R., Lindvai-Soos, D. & Eichberger, A., 2013, Proceedings of SAE 2013 World Congress. ., p. 1-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Virtuelle Absicherung von Gesamtfahrzeugintegration bei Fahrerassistenzsystemen am Beispiel Abstandstempomat, Notbremsassistent und Spurhalteassistent

Eichberger, A., Bernsteiner, S., Magosi, Z. F., Gächter, J., Lindvai-Soos, D. & Eitzinger, S., 2013, Proceedings Simvec Spezial: Simulation Fahrdynamik. ., p. 1-40

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Wheel-individual estimation of the friction potential for split frition and changing friction conditions for the application in an automated emergency braking system

Lex, C., Kobialka, H-U. & Eichberger, A., 2013, Chassis.tech plus 2013. Wiesbaden: Springer Vieweg, p. 609-621

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2012

Aerodynamic investigations in conceptual vehicle development supported by integrated design and simulation methods

Hirz, M., Stadler, S., Prenner, M. & Mayr, J., 2012, FISITA World Congress 2012. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

ConceptCar: A tool for early development phases supporting conceptual vehicle design and evaluation

Hillebrand, A., Hirz, M. & Dietrich, W., 2012, Grazer Symposium Virtuelles Fahrzeug. ., p. 1-15

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Conceptual Full-Vehicle Development supported by Integrated Computer-Aided Design Methods

Stadler, S., Hirz, M., Thum, K. & Rossbacher, P., 2012, CAD and Applications Conference 2012. ., p. nn-nn

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Ein integrierter Ansatz zur ganzheitlichen Systembetrachtung am Beispiel der konzeptionellen Karosserieentwicklung

Mayr, J., Hirz, M. & Rossbacher, P., 2012, Karosseriebautage Hamburg. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Elaborate Measuring System for Sensitivity Analyses and In-Depth Investigations of a Squealing Brake System

Wallner, D. & Meister, M., 2012, International Styrian Noise, Vibration & Harshness Congress. ., p. nn-nn

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

EXPERIMENTAL SENSITIVITY ANALYSIS OF A BRAKE SYSTEM

Wallner, D., Halder, C. & Meister, M., 2012, Eurobrake 2012. ., p. nn-nn

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Integration of aerodynamic simulation and design in conceptual automotive development

Hirz, M., Prenner, M. & Stadler, S., 2012, NordDesign Conference. ., p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling and Simulation of Brake System Based on Matlab/SimMechanics

Zamani Shandiz, E. & Wallner, D., 2012, EUROMECH Solid Mechanics Conference. ., p. cd-cd

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On the competition between fluid and electric automotive drives

Hirschberg, W., 2012, Proc. 8th International Fluid Power Conference Dresden. ., p. 397-412

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Potenzial der Aerodynamik zur Steigerung der Transporteffizienz von schweren Nutzfahrzeugen

Stadler, S., Hirschberg, W. & Hirz, M., 2012, 5. Grazer Nutzfahrzeug Workshop. ., p. 1-15

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Simulationsprozess für Festigkeit und Komfort von Nutzfahrzeugen

Geiger, N., Litter, S., Schittenhelm, M., Hirschberg, W. & Lion, A., 2012, 5. Grazer Nutzfahrzeug Workshop. Graz: ., p. 1-27

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2011

About the influence of the truck on a driver's performance

Tengg, W., Weinfurter, H., Prettenthaler, C., Hirschberg, W., Haas, J. & Danner, C., 2011, 13th EAEC European Automotive Congress. ., p. 1-14

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Advanced computer aided design methods for integrated virtual product development processes

Hirz, M., Harrich, A. & Rossbacher, P., 2011, CAD Conference 2011. ., p. 1-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Analyse der Fahrsicherheit von Fahrzeugen mit Radnabenmotoren auf unebener Fahrbahn

Rojas Rojas, A. E., Niederkofler, H. & Dürnberger, J., 2011, 2. Automobiltechnisches Kolloquium. München: VDI, p. 1-19

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

A New Massless Leaf Spring Model and Its Application in the Simulation of Heavy Commercial Vehicles

Müller, G., Geiger, N., Waser, S., Hirschberg, W., Ille, T. & Zander, R., 2011, 22nd International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD). ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Brake Squeal – Investigation of Different Brake Pad Materials

Wallner, D. & Bernsteiner, S., 2011, 13th EAEC European Automotive Congress. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Bremsenquietschen als Messtechnische Herausforderung

Wallner, D., 2011, 1. VDI-Fachkonferenz Innovative Bremstechnik. ., p. nn-nn

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Comprehensive Evaluation of Different Approaches to Estimate the Tire-Road Grip Potential and their Application in Driver Assistance Systems

Lex, C., Eichberger, A. & Hirschberg, W., 2011, Chassis.tech plus 2011. Wiesbaden: ATZ live, p. 675-703

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Tires
Friction
Active suspension systems
Sensors
Wheels

Co-simulation for the synthesis of suspension systems for passenger vehicles with in-wheel motors based on genetic algorithms

Rojas Rojas, A. E., Niederkofler, H. & Wilson Aponte, J. E., 2011, Chassis.tech plus - 2nd International Munich Chassis Symposium. München: ATZ, p. 303-318

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Development and Build-Up of a Hybrid Commercial Vehicle

Prenninger, K., Ackerl, M. & Eglseer, A., 2011, 13th EAEC European Automotive Congress. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Development of a Control Strategy for Commercial Vehicles

Ackerl, M. & Eglseer, A., 2011, Hybrid and Electric Vehicles. ., p. 133-145

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Development of a single wheel steer-by-wire system: Implementation aspects and failure handling

Niederkofler, H., Rojas Rojas, A. E. & Dürnberger, J., 2011, Proceedings of 22nd International Symposium on Dynamics of Vehicles on Roads and Tracks. ., p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Electrical single wheel steering for future suspension systems

Niederkofler, H., Dürnberger, J. & Rojas Rojas, A. E., 2011, EAEC 2011. ., p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Electrification of All-Wheel-Drive Components - Energy Efficiency, Control and Thermal Study of Different Motor Types in Driving Cycles

Willberger, J., 2011, Hybrid & Elektro. Graz: Technische Universität Graz, p. 44-45

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch