• 8010

    Inffeldgasse 11 Graz

    Austria

Research Output 1977 2019

Filter
Conference contribution
2017

System-Theoretic Analysis of Air Vehicle Separation in Visual Flight

Koglbauer, I. V. & Leveson, N., 2017, Proceedings of the 32nd Conference of the European Association for Aviation Psychology. Schwarz, M. & Harfmann, J. (eds.). Groningen, NL, p. 117-131

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Effect of Rotor Position Errors on the Dynamic Behavior of Field-Orientated Controlled PMSM

Gächter, J., Hirz, M. & Seebacher, R., 22 May 2017, Electric Machines and Drives Conference (IEMDC), 2017 IEEE International. IEEE. (ed.). 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Vehicle Side Slip Angle Observation with Road Friction Adaptation

Jin, C., Shao, L., Lex, C. & Eichberger, A., 2017, 20th IFAC World Congress . Elsevier B.V., p. 3406-3411 6 p. (IFAC-PapersOnLine; vol. 50).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Friction
Error analysis
Convergence of numerical methods
Sensors
Observability
2016

A History-Based Load Requirement Prediction Algorithm, for Predictive Hybrid- and Thermal Operation Strategies

Karoshi, P., Tieber, K., Kneissl, C., Peneder, G., Kraus, H., Hofstetter, M., Fabian, J. & Ackerl, M., 14 Apr 2016, SAE - World Congress 2016. SAE International, 2016-01-1238

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A new approach of a global knowledge-based engineering infrastructure

Salchner, M., Hirz, M., Stadler, S. & Ameye, J., 2016, Computer-Aided Design and Applciations.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CO2e-Emissionen verschiedener PKW-Technologien bei realen Nutzerverhalten im Produktlebenszyklus

Brunner, H., Hirz, M. & Fischer, P., 2016, Fortschritt-Berichte VDI Reihe 12 Nr. 799: 37. Internationales Wiener Motorensymposioum. Lenz, U-P. D. T. H-P. (ed.). Düsseldorf: VDI/VDE, Vol. 2. p. 429 - 446 18 p. (Fortschritt-Berichte VDI Reihe; vol. Reihe 12, no. 799).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Considering Influences of Sustainable Production in Early Automotive Engineering Phases

Brunner, H., Hirz, M. & Wurzer, A., 1 Jun 2016, Management of Technology Step to Sustainable Production 2016 - Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Efficient and Accurate Consideration of Nonlinear Joint Contact Within Multibody Simulation

Pichler, F., Witteveen, W. & Fischer, P., 2016, Nonlinear Dynamics: Proceedings of the 33rd IMAC, A Conference and Exposition on Structural Dynamics. Orlando, USA, Vol. Vol. 1. p. 441-448 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Pendulums
Multilayers
Dynamical systems
Railroad cars
Derivatives

Efficient application of multi-core processors as substitute of the E-Gas (Etc) monitoring concept

Großmann, M., Hirz, M. & Fabian, J., 2016, 2016 SAI Computing Conference (SAI). London: Institute of Electrical and Electronics Engineers, p. 913-918

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Monitoring
Gases
Controllers
Automobiles

Enhanced knowledge-based 3D-CAD methods supporting automotive body-in-white production engineering

Hirz, M. & Rossbacher, P., 1 Jun 2016, Management of Technology - Step to Sustainable Production. Cosic, P. (ed.). Zagreb: Faculty of Transport and Traffic Sciences, University of Zagreb

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Ergebnisse und Schlussfolgerungen zur Begleitforschung der Modellregion Elektromobilität Großraum Graz

Fabian, J., Wieland, T., Ernst, M., Schmautzer, E., Fickert, L., Slupetzky, W. & Schmied, R., 2016, Energie für unser Europa. Graz: Technische Universität Graz, p. 441-442

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Estimation of tire road friction during vehicle steering

Shao, L., Lex, C., Hackl, A. & Eichberger, A., 2016, Advanced Vehicle Control AVEC 16: Proceedings of the 13th International Symposium on Advanced Vehicle Control (AVEC’ 16). Edelmann, J., Plöchl, M. & Pfeffer, P. E. (eds.). CRC Press/Balkema

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Experimental validation of a non-linear first-order tyre dynamics approach

Hackl, A., Hirschberg, W., Lex, C. & Rill, G., 29 Apr 2016, The Dynamics of Vehicles on Roads and Tracks: 24th Symposium of the International Association for Vehicle System Dynamics (IAVSD 2015). Graz: CRC Press, Vol. 24. p. 443 452 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

tire
transducer
modeling
simulation
parameter

Experimental Validation of the Maxwell Model for Description of Transient Tyre Forces

Hackl, A., Hirschberg, W., Lex, C. & Rill, G., Mar 2016, 16. Internationales Stutgarter Symposium: Automobil- und Motorentechnik. Springer Vieweg, Vol. 1. p. 401-418 18 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Flexible Parameterization Strategies in Automotive 3D Vehicle Layout

Hirz, M. & Rossbacher, P., 2016, CAD and A Conference 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Future trends in CAD – from the perspective of automotive industry

Hirz, M., Rossbacher, P. & Gavacova, J., 2016, CAD and A Conference 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Generative Engineering Design methodology used for the development of surface-based components

Gavacova, J., Gulan, L., Forrai, M. & Hirz, M., 2016, CAD and A Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Innovative transport concept through combined mobility based on multimodal nodes in the area of Graz

Kohla, B., Fabian, J. & Just-Moczygemba, E., 4 Apr 2016, Smart and Green Transitions in Cities and Regions. Graz, Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Integration of New Urban Vehicles in Transport Systems and Mobility Concepts

Brunner, H., Hirz, M. & Walzel, B., 26 Sep 2016, FISITA World Automotive Congress - Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Nonlinear Adaptive Observer for Side Slip Angle and Road Friction Estimation

Shao, L., Jin, C., Lex, C. & Eichberger, A., 2016, 55th IEEE Conference on Decision and Control (CDC 2016). IEEE Computer Society, p. 6258-6265 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
Friction
Tires
Lyapunov functions
Electric vehicles
Asymptotic stability

PEEC-Based Multi-Objective Synthesis of Non-Uniformly Spaced Linear Antenna Arrays

Bauernfeind, T., Baumgartner, P., Biro, O., Magele, C., Preis, K., Hackl, A., Alotto, P. & Torchio, R., 2016, 17th Biennial Conference on Electromagnetic Field Computation.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Road Friction Estimation using Recursive Total Least Squares

Shao, L., Lex, C., Hackl, A. & Eichberger, A., 2016, IEEE Intelligent Vehicle Symposium. IEEE Computer Society, p. 533-538 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access

System Design Optimization of xEV-Axle Drives with Package Restrictions

Hofstetter, M., Hirz, M. & Ackerl, M., 26 Sep 2016, Proceedings of the FISITA 2016 World Automotive Congress. F2016-THBC-020

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Drive axles
Electric drives
Powertrains
Plug-in hybrid vehicles
Systems analysis

The Design of Vehicle Adaptive Cruise Control Based on Macroscopic Traffic Behavior Applying Model Predective Control Strategy

Faramarzi, M., Samiee, S., Azadi, S. & Kazemi, R., 2016, FISITA World Automotive Congress 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Adaptive cruise control
Control systems
Model predictive control
Dynamic models
Controllers

The FSI –an Example for Successful University –Industry Collaboration

Hirz, M., Pointner, A. & Deketele, A., 2016, INTED Conference 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Influence of Product Life Cycle Evaluation on Lightweight Design

Hirz, M., Brunner, H., Wurzer, A. & Schnöll, H. P., 26 Sep 2016, FISITA World Automotive Congress 2016 - Congress Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Analysis and Development of Fail Operational Automotive Mechatronic Systems

Reinhofer, S., Ernst, M. & Fabian, J., 2015, International Conference on Advances in Software, Control and Mechanical Engineering. ., p. 36-42

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Analysis Methods in the Development Process of Mechatronic Drivetrain Systems with Special Focus on Automotive Software

Ernst, M., Erlachner, S., Hirz, M., Fabian, J. & Wotawa, F., 2015, Volume II. ., p. 63-68

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A New Approach to an Adaptive and Predictive Operation Strategy for PHEVs

Kraus, H., 2015, SAE Technical Paper 2015-01-1222. SAE International, p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CO2 Reduction Potential of CFRP-Bodywork Concepts Considering Production and In-Use Phase

Schnöll, H. P., Brunner, H., Zottler, M., Hirz, M. & Ramsauer, C., 2015, Proceedings International Conference Management of Technology - Step to Sustainable Production. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CO2 Reduction Potential of CFRP-Bodywork Concepts Considering Production and In-Use Phase

Schnöll, H. P., Brunner, H., Zottler, M., Hirz, M. & Ramsauer, C., 2015, Book of Abstracts - International Conference Management of Technology - Step to Sustainable Production. Zagreb: ., p. 39-39

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development of a Data Model for an Innovative Analysis Method for Mechatronic Systems in the Field of Automotive Engineering

Dallinger, P., Ernst, M. & Fabian, J., 2015, (Accepted/In press) International Conference on Advances in Software, Control and Mechanical Engineering. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

ECO-Design in the Automotive Industry – Potentials and Challenges

Hirz, M. & Brunner, H., 2015, Proceedings International Conference Management of Technology - Step to Sustainable Production. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Erstellung generischer Unfallszenarien für die Effektivitätsbewertung aktiver Sicherheitssysteme am Beispiel Notbremsassistent

Eichberger, A., Zukancic, A. & Wimmer, P., 2015, 5. Jahrestagung der GMTTB (Gesellschaft für Medizinisch Technische Traumabiomechanik). ., p. 1-35

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Erstellung generischer Unfallszenarien für die Effektivitätsbewertung aktiver Sicherheitssysteme am Beispiel Notbremsassistent

Eichberger, A., Zukancic, A. & Wimmer, P., 2015, (Accepted/In press) SafetyWeek Aschaffenburg. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Forschungserkenntnisse zum technischen Monitoring und Mobilitätsverhalten anhand der Modellregion für Elektromobilität im Großraum Graz

Fabian, J., Wieland, T., Schmautzer, E., Fickert, L., Slupetzky, W. & Schmied, R., 2015, (Accepted/In press) Internationale Energiewirtschaftstagung an der TU Wien. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Framework of Knowledge Based Design in Minibus Skeleton Development

Hussein, H. M. A., Farouk, K. & Hirz, M., 2015, Industry Academia Collaboration. Cairo: IAC, p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Identification method of longitudinal tyre characteristics based on real road driving

Kerschbaumer, A., Hirschberg, W. & Prezel, D., 2015, (Accepted/In press) 24th International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD). Boca Raton, Florida: CRC Press/Balkema

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On-board determination of the friction coefficient between tire and road using standard application vehicle dynamics sensors

Lex, C., Eichberger, A. & Hirschberg, W., 2015, (Accepted/In press) Proceedings of 24th International Symposium on Dynamics of Vehicles on Roads and Tracks. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Optimisation of Automotive Software Quality Management by Use of Analysis Methods in the Development Process of Mechatronic Systems

Ernst, M., Erlachner, S., Hirz, M. & Fabian, J., 2015, UR IAAST INT´L CONFERENCE. Universal Researchers in Science and Technology, p. 21-25

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Performance comparison of different battery-electric vehicles participating within an Electro-Rally in Middle-Europe

Lach, G. M., Sternjak, A. W. J., Fabian, J., Kraus, H. & Ackerl, M., 2015, Volume II. Orlando: International Institute of Informatics and Systemics, p. 87-92

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Potentieller Einfluss von C2X auf die Vermeidung von Motorradunfällen bzw. Reduktion der Verletzungsschwere

Billicsich, S., Tomasch, E., Sinz, W., Eichberger, A., Markovic, G. & Magosi, Z. F., 2015, 10. VDI-Tagung Fahrzeugsicherheit - Sicherheit 2.0. ., Vol. 2265. p. 383-392

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Sensor Range Sensitivity of Predictive Energy Management in Plug-In Hybrid Vehicles

Hofstetter, M., Ackerl, M., Hirz, M., Kraus, H., Karoshi, P. & Fabian, J., 4 Nov 2015, 2015 IEEE Conference on Control and Applications, CCA 2015 - Proceedings. Institute of Electrical and Electronics Engineers, p. 1925-1932 8 p. 7320891

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Plug-in hybrid vehicles
Energy management
Sensors
Hybrid powertrains
Torque control

Strategies for the Development and Analysis of Functional Safe Automotive Mechatronic Systems

Reinhofer, S., Ernst, M. & Fabian, J., 2015, Volume I. Orlando: International Institute of Informatics and Systemics, p. 202-205

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Potential of Relational Database Framework Supporting Knowledge-Based Design

Viana Alvarez, I., Stadler, S., Hirz, M. & Rossbacher, P., 2015, (Accepted/In press) TMT 2015. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Tyre Dynamics: Model Validation and Parameter Identification

Hackl, A., Hirschberg, W., Lex, C. & Rill, G., 2015, Proc. of the European Automotive Congress EAEC-ESFA 2015. Cham, Heidelberg, New York: Springer, Vol. 1. p. 219-232

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File
2014

Aktuelle Forschungsthemen und innovative Trends der Elektromobilität in Österreich

Fabian, J., Brunner, H., Hirz, M., Wieland, T., Schmautzer, E., Fickert, L., Wegleiter, H., Slupetzky, W. & Schmied, R., 2014, (Accepted/In press) Innehalten und Ausblick: Effektivität und Effizienz für die Energiewende. Graz: Technische Universität Graz

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Anforderungen an das Fahrzeug für die multimodale Mobilität der Zukunft

Brunner, H., Hirz, M. & Fabian, J., 2014, Grazer Symposium Virtuelles Fahrzeug. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A novel approach of aerodynamic optimization on long-distance transportation trucks

Stadler, S. & Hirz, M., 2014, FISITA 2014 World Congress. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Bewertung von Fahrerassistenzsystemen von Normalfahrerinnen und Normalfahrern im Realversuch

Eichberger, A., Lex, C., Bliem, N., Sternat, A. S., Koglbauer, I., Schinko, C., Battel, M. & Holzinger, J., 2014, 4. Jahrestagung der GMTTB (Gesellschaft für Medizinisch Technische Traumabiomechanik). ., p. 1-32

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch