• 8010

    Inffeldgasse 11 Graz

    Austria

Research Output 1977 2020

Filter
Conference contribution
Conference contribution

Strain Gauge Application at Pad Backing Plates to Investigate Friction Force and NVH Issues

Pürscher, M. & Fischer, P., 4 May 2017, Proceedings of Eurobrake 2017. 10 p. EB2017-FBR-004

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Strain gages
Brakes
Friction
Stick-slip
Creep

Strategies for the Development and Analysis of Functional Safe Automotive Mechatronic Systems

Reinhofer, S., Ernst, M. & Fabian, J., 2015, Volume I. Orlando: International Institute of Informatics and Systemics, p. 202-205

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Subjective Evaluation of Advanced Driver Assistance by Evaluation of Standardized Driving Maneuvers

Bernsteiner, S., Holl, R., Lindvai-Soos, D. & Eichberger, A., 2013, Proceedings of SAE 2013 World Congress. ., p. 1-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Suspension Influences on a Steer-by-Wire Torque Vectoring Vehicle

Reiter, G., Miano, C., Polmans, K., Hackl, A. & Lex, C., 2018, 18. Internationales Stuttgarter Symposium - Automobil- und Motorentechnik: Proceedings. Bargende, M., Reuss, HC. & Wiedemann, J. (eds.). Springer Vieweg, p. 327-341

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Sustainable product development: provision of information in early automotive engineering phases

Brunner, H., Rossbacher, P. & Hirz, M., 2017, MOTSP 2017 - International Conference Management of Technology – Step to Sustainable Production.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Synthesis of Suspension Systems for Passenger Vehicles with In-Wheel Motors

Rojas Rojas, A. E., Niederkofler, H. & Wilson Aponte, J. E., 2011, 13th EAEC European Automotive Congress. Valencia: EAEC, p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Synthetic Engine Concept and Modularity for a 3-Wheeler

Thien, U., Skalla, C., Hirz, M. & Kirchberger, R., 2008, SAE India International Mobility Conference 2008. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Systematic Experimental Creep Groan Characterization Using a Suspension and Brake Test Rig

Pürscher, M. & Fischer, P., 17 Sep 2017, SAE Technical Paper. 14 p. 2017-01-2488

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Brakes
Creep
Wheels
Stick-slip
Experiments

System Design Optimization of xEV-Axle Drives with Package Restrictions

Hofstetter, M., Hirz, M. & Ackerl, M., 26 Sep 2016, Proceedings of the FISITA 2016 World Automotive Congress. F2016-THBC-020

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Drive axles
Electric drives
Powertrains
Plug-in hybrid vehicles
Systems analysis

System-Theoretic Analysis of Air Vehicle Separation in Visual Flight

Koglbauer, I. V. & Leveson, N., 2017, Proceedings of the 32nd Conference of the European Association for Aviation Psychology. Schwarz, M. & Harfmann, J. (eds.). Groningen, NL, p. 117-131

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Teilentladungserfassung an elektrischen Betriebsmitteln bei Gleichspannungsbeanspruchung

Fabian, J., Muhr, H. M. & Schichler, U., 2014, (Accepted/In press) Öl/Papier- und gasisolierte Systeme in Komponenten der elektrischen Energieversorgung. Graz: .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Test Bench and Computation Standards for Vibration Loaded Attachment Parts of Truck Frames.

Riener, H., Embacher, E., Fischer, P. & Mayr, A., 1998, VSDIA '98 - 6th Mini Conference on Vehicle System Dynamics, Identification and Anomalies. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

The Design of Vehicle Adaptive Cruise Control Based on Macroscopic Traffic Behavior Applying Model Predective Control Strategy

Faramarzi, M., Samiee, S., Azadi, S. & Kazemi, R., 2016, FISITA World Automotive Congress 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Adaptive cruise control
Control systems
Model predictive control
Dynamic models
Controllers

The Effect of Rotor Position Errors on the Dynamic Behavior of Field-Orientated Controlled PMSM

Gächter, J., Hirz, M. & Seebacher, R., 22 May 2017, Electric Machines and Drives Conference (IEMDC), 2017 IEEE International. IEEE. (ed.). 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Effect of the FMVSS201u Free Motion Headform Legislation on Head Injuries: A Discussion Based on Numerical Simulations.

Eichberger, A., Steiner, J., Breitenhuber, W. & Wernig, J., 2002, Proceedings of the 2002 International IRCOBI Conference on the Biomechanics of Impact. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

The FSI –an Example for Successful University –Industry Collaboration

Hirz, M., Pointner, A. & Deketele, A., 2016, INTED Conference 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Influence of Product Life Cycle Evaluation on Lightweight Design

Hirz, M., Brunner, H., Wurzer, A. & Schnöll, H. P., 26 Sep 2016, FISITA World Automotive Congress 2016 - Congress Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Neck Injury Criterion in Dummy Tests

Eichberger, A., Körner, W. & Steffan, H., 1999, Proceedings of the 1999 International IRCOBI Conference on the Biomechanics of Impact. ., p. 537-539

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Theoretical Computation of Four Wheel Drive Vehicle Dynamics

Hirschberg, W., 1992, Proc. of 3rd Int. Conference "Innovation and Reliability in Automotive Design and Testing". ., p. 301-313

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

The Potential of 3D-CAD Based Process Optimization in the Automotive Concept Phase

Rossbacher, P., Hirz, M., Harrich, A., Dietrich, W. & Theiss, N., 2009, SAE World Congress. ., p. 0-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The potential of new vehicle concepts for transport optimization and GHG emission reduction in urban areas

Brunner, H. & Hirz, M., 2014, (Accepted/In press) Sustainable Materials/Manufacturing. SAE International

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The potential of parametric design methods in automotive door development

Hirz, M., Harrich, A., Mayr, J. & Haselwanter, A., 2010, Fisita World Congress. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Potential of Relational Database Framework Supporting Knowledge-Based Design

Viana Alvarez, I., Stadler, S., Hirz, M. & Rossbacher, P., 2015, (Accepted/In press) TMT 2015. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The use and future of biofuels

Aydogan, H., Hirz, M. & Brunner, H., 2014, 12th International Academic Conference, Prague. Prague: University of Economics, Prague, p. 1-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Toward eCorner: Energy Efficient Design of Mechatronic Suspension Systems

Niederkofler, H. & Rojas Rojas, A. E., 2010, (Submitted) Proceedings of FISITA World Automotive Congress. ATZautotechnology

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Tuning of Vibration Absorbers Under Wide Band Excitation by Stochastic Dynamic Analysis.

Fischer, P., Karrer, H. & Kamla, T., 1998, Proceedings of ISMA 23 - 1998 International Conference on Noise and Vibration Engineering. ., p. 753-760

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Tyre Dynamics: Model Validation and Parameter Identification

Hackl, A., Hirschberg, W., Lex, C. & Rill, G., 2015, Proc. of the European Automotive Congress EAEC-ESFA 2015. Cham, Heidelberg, New York: Springer, Vol. 1. p. 219-232

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Tyre Forces Computation Module DTIRE

Hirschberg, W., 1993, Proc. 1st Int. Colloquium on Tyre Models for Vehicle System Dynamics Analysis. Amsterdam/Lisse: Swets&Zeitlinger B.V., Vol. 21. p. 167-174 (Vehicle System Dynamic).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Tyre Modelling and Simulation - Advances and Insufficiencies

Hirschberg, W., 2007, Proceedings FH Science Day. Aachen: Shaker-Verlag GmbH, p. 25-32

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Tyre Type Dependent Transient Force Behaviour by Means of a Maxwell Model

Hackl, A., Hirschberg, W., Lex, C. & Rill, G., 2018, Dynamics of Vehicles on Roads and Tracks: Proceedings of the 25th International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD 2017). London: CRC Press, Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Unterstützung der Türenkonstruktion in der Konzeptphase durch parametrisch- assoziative Konstruktionsmethoden

Harrich, A., Mayr, J., Hirz, M. & Haselwanter, A., 2009, OEM Forum Fahrzeugtüren und -klappen. Düsseldorf: Springer-VDI-Verlag GmbH & Co.KG, Vol. 2064. p. 21-37 (VDI-Berichte).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Utilization of Test Regions Worldwide for ADAS Validation

Dietl, P., Bernsteiner, S., Tschabuschnig, K., Alber, F. & Payerl, C., 2018, 20. VDA Technischer Kongress 2018: 20th VDA Technical Congress 2018. Berlin, p. 150-159

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Sensors
Engineers
Industry

Validation of 3yrs and 6yrs FTSS dummy models for check of OoP suitability

Ruff, C. & Eichberger, A., 2005, 4. LS-Dyna Forum. ., p. 47-58

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Validation of Integrated Vehicle Safety via an Independent Co-simulation Plattform

Wimmer, P., Eichberger, A., Rieser, A. & Watzenig, D., 2011, (Accepted/In press) Proceedings of the Vehicle Property Validation 2011. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Vehicle Dynamics Control - An integrated approach

Rosinger, W. & Lindvai-Soos, D., 2010, Steering Systems 2010. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Vehicle Side Slip Angle Observation with Road Friction Adaptation

Jin, C., Shao, L., Lex, C. & Eichberger, A., 2017, 20th IFAC World Congress . Elsevier B.V., p. 3406-3411 6 p. (IFAC-PapersOnLine; vol. 50).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Friction
Error analysis
Convergence of numerical methods
Sensors
Observability

Virtuelle Absicherung von Gesamtfahrzeugintegration bei Fahrerassistenzsystemen am Beispiel Abstandstempomat, Notbremsassistent und Spurhalteassistent

Eichberger, A., Bernsteiner, S., Magosi, Z. F., Gächter, J., Lindvai-Soos, D. & Eitzinger, S., 2013, Proceedings Simvec Spezial: Simulation Fahrdynamik. ., p. 1-40

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Vorhersagen des instationären Abkühlverhaltens der PKW-Bremse durch Co-Simulation und stationäre Strömungssimulation unter Berücksichtigung der gesamten Radaufhängung

Tonchev, A. A., Hettegger, M., Hirschberg, W. & Jagsch, S., 2008, VDI Berichte 2031. VDI, Vol. VDI-Berichte 2031. p. 417-432

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Wheel-individual estimation of the friction potential for split frition and changing friction conditions for the application in an automated emergency braking system

Lex, C., Kobialka, H-U. & Eichberger, A., 2013, Chassis.tech plus 2013. Wiesbaden: Springer Vieweg, p. 609-621

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Zur Modellierung und Anwendung nichtlinearer Fahrwerkslagerungen

Hirschberg, W. & Rieder, G., 1995, Veranstaltungsunterlagen - Simulationstechnik in der Fahrzeugentwicklung. Essen: Haus der Technik e.V., p. 1-18

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Zur Objektivierung des Fahrverhaltens in der Fahrwerksentwicklung

Hirschberg, W., 2001, Tagung H030060371: Driveability, Haus der Technik, Essen. Essen: Haus der Technik, p. 1-14

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Zur Rekonstruktion von Reifencharakteristiken und -parametern aus fahrdynamischen Messungen am Gesamtfahrzeug

Kerschbaumer, A., Prettenthaler, C., Hirschberg, W., Lex, C., Schagerl, G. & Prezel, D., 2009, 14. VDI-Fachtagung Erprobung und Simulation in der Fahrzeugentwicklung, Würzburg. Düsseldorf: Springer-VDI-Verlag GmbH & Co.KG, p. 1-14

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review