Research Output per year
Research Output 1977 2019
- 1 - 50 out of 287 results
- Type (ascending)
Conference contribution
3D CAD parametric design strategies with interlinked CAE reference object creation for the overall vehicle layout optimization in the early automotive concept phase
Rossbacher, P., Hirz, M. & Dietrich, W., 2010, Fisita World Congress. ., p. 1-10Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Abhängigkeit des Reibungskoeffizienten von Bremsscheibentemperatur, Bremsdruck und Fahrzeuggeschwindigkeit
Tonchev, A. A. & Hirschberg, W., 2006, UNITECH International Scientific Conference, Gabrovo. Gabrovo: University publishing house V.Aprilov, Vol. Volume 1. p. 517-521Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research
About the Identification of Tyre Characteristics Based on Vehicle Dynamics Measurements
Kerschbaumer, A., Kollreider, D., Prettenthaler, C., Hirschberg, W., Schagerl, G. & Peinsitt, M., 2010, (Accepted/In press) Internationales Stuttgarter Symposium Automobil- und Motorentechnik. ATZlive GWV Fachverlage GmbH, Vol. 1. (10th Stuttgart International Symposium Automotive and Engine Technology).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
About the influence of the truck on a driver's performance
Tengg, W., Weinfurter, H., Prettenthaler, C., Hirschberg, W., Haas, J. & Danner, C., 2011, 13th EAEC European Automotive Congress. ., p. 1-14Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research
Accuracy of Friction Estimation during Driving
Kobialka, H-U. & Lex, C., 2013, Conference Design of Experiments (DOE) in Engine Development. Renningen: expert verlag GmbH , p. 190-197 (Design of Experiments (DoE) in Engine Development).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Friction
Sensors
Recurrent neural networks
Tires
Time series
A Comparison Study of Active Head Restraints for Neck Protection in Rear-End Collisions
Bigi, D., Heilig, A., Steffan, H. & Eichberger, A., 1998, Proceeedings of the 16th ESV Conference, 1998. ., p. 1103-1110Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research
Open Access
File
A contribution to advanced knowledge-based design in the development of complex mechanical products
Stadler, S. & Hirz, M., 2013, ICED13 - Design for Harmonies. ., p. 1-15Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Acoustic Simulation - Run Up Analysis of New Audi V8 Otto Engine
Fischer, P., 2002, (Accepted/In press) Fisita 2002 World Automotive Conference. .Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research
A Development Process for Creating Finite-Element Models of Crash Test Dummies Based on Investigations of the Hardware
Rieser, A., Nußbaumer, C., Eichberger, A. & Steffan, H., 2009, Proceedings of the 21th ESV Conference. ., p. 1-10Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research
Advanced 3D-CAD Design Methods in Education and Research
Hirz, M., Harrich, A. & Rossbacher, P., 2009, The 2nd International Multi-Conference on Engineering and Technological Innovation. ., p. 1-6Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Advanced computer aided design methods for integrated virtual product development processes
Hirz, M., Harrich, A. & Rossbacher, P., 2011, CAD Conference 2011. ., p. 1-13Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Aerodynamic investigations in conceptual vehicle development supported by integrated design and simulation methods
Hirz, M., Stadler, S., Prenner, M. & Mayr, J., 2012, FISITA World Congress 2012. ., p. 1-8Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
A History-Based Load Requirement Prediction Algorithm, for Predictive Hybrid- and Thermal Operation Strategies
Karoshi, P., Tieber, K., Kneissl, C., Peneder, G., Kraus, H., Hofstetter, M., Fabian, J. & Ackerl, M., 14 Apr 2016, SAE - World Congress 2016. SAE International, 2016-01-1238Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Aktive Fahrwerkssysteme am Beispiel einer neuen Hinterachslenkung ...hilft es auch dem Reifen?
Scholz, R., Rosinger, W., Eitzinger, S. & Kober, W., 2008, 6. Tag des Fahrwerks. ., p. 1-39Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research
Aktuelle Forschungsthemen und innovative Trends der Elektromobilität in Österreich
Fabian, J., Brunner, H., Hirz, M., Wieland, T., Schmautzer, E., Fickert, L., Wegleiter, H., Slupetzky, W. & Schmied, R., 2014, (Accepted/In press) Innehalten und Ausblick: Effektivität und Effizienz für die Energiewende. Graz: Technische Universität GrazResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Akustikberechnung lokal gedämpfter Motorstrukturen unter Einbeziehung stochastischer Erregerprozesse.
Fischer, P., 2000, VDI Berichte 1559: Berechnung und Simulation im Fahrzeugbau,VDI-Gesellschaft Fahrzeug- und Verkehrstechnik. ., p. 121-144Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research
Akustiksimulation von Motorhochläufen - Berechnung des neuen Audi V8 4,2 Liter Ottomotors
Fischer, P., 2003, Aachener Kolloquium Fahrzeug- und Motorentechnik. ., Vol. Band 1. p. 471-491Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research
Analyse der Fahrsicherheit von Fahrzeugen mit Radnabenmotoren auf unebener Fahrbahn
Rojas Rojas, A. E., Niederkofler, H. & Dürnberger, J., 2011, 2. Automobiltechnisches Kolloquium. München: VDI, p. 1-19Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research
Analysis and Development of Fail Operational Automotive Mechatronic Systems
Reinhofer, S., Ernst, M. & Fabian, J., 2015, International Conference on Advances in Software, Control and Mechanical Engineering. ., p. 36-42Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Analysis Methods in the Development Process of Mechatronic Drivetrain Systems with Special Focus on Automotive Software
Ernst, M., Erlachner, S., Hirz, M., Fabian, J. & Wotawa, F., 2015, Volume II. ., p. 63-68Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Analysis of Disk Brake Creep Groan Vibrations at Automobile Chassis Front Corner Level Using High-Speed Recordings and Digital Image Processing
Pürscher, M. & Fischer, P., 4 Sep 2019, Proceedings of ICOVP 2019. 26 p. 18450Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Chassis
Brakes
Automobiles
Creep
Image processing
Analysis of the Acceleration Behavior of the Head and its Influence on Spine Injury in Rearend Impact Collisions
Mühlbauer, M., Eichberger, A., Geigl, B. C., Steffan, H., Hell, W., Langwieder, K. & Leinzinger, E. P., 1996, Abstracts Book, Cervical Spine Research Society, European Section, XIIth Annual Meeting. ., p. 1-10Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
An approach supporting integrated modeling and design of complex mechatronics products by the example of automotive applications
Hirz, M., 11 Jul 2018, 22nd Multi-Conference on Systemics, Cybernetics and Informatics WMSCI 2018. p. 1-6Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
A new approach for the reduction of aerodynamic drag of long-distance transportation vehicles
Hirz, M. & Stadler, S., 2013, SAE 2013 Commercial Vehicle Engineering Congress. SAE, p. 1-10Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
A new approach of a global knowledge-based engineering infrastructure
Salchner, M., Hirz, M., Stadler, S. & Ameye, J., 2016, Computer-Aided Design and Applciations.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
A New Approach to an Adaptive and Predictive Operation Strategy for PHEVs
Kraus, H., 2015, SAE Technical Paper 2015-01-1222. SAE International, p. ---Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
A new crash test configuration for car to car frontal collisions with small lateral overlap
Eichberger, A., Schimpl, W., Werber, C. & Steffan, H., 2006, Proceedings of the 2006 Internationl Crashworthiness Conference (icrash 2006). ., p. 1-11Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research
A New Massless Leaf Spring Model and Its Application in the Simulation of Heavy Commercial Vehicles
Müller, G., Geiger, N., Waser, S., Hirschberg, W., Ille, T. & Zander, R., 2011, 22nd International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD). ., p. 1-6Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
A New Side Impact Sled Test Rig at Magna Steyr for Validation of Virtual Side Impact Development
Eichberger, A., Wörgötter, F., Haberkorn, G. & Fellner, B., 2008, Proceedings of FISITA WOrld Congress 2008. ., p. 1-10Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Anforderungen an das Fahrzeug für die multimodale Mobilität der Zukunft
Brunner, H., Hirz, M. & Fabian, J., 2014, Grazer Symposium Virtuelles Fahrzeug. ., p. ---Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
A Novel Approach in Vehicle Dynamics Evaluation by Means of System Identification
Prenninger, K., Hirschberg, W. & Ecker, J., 2007, Proc. 11th European Automotive Congress (AE06-1 on CD). ., p. 1-12Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
A novel approach of aerodynamic optimization on long-distance transportation trucks
Stadler, S. & Hirz, M., 2014, FISITA 2014 World Congress. ., p. ---Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
A Novel Control Algorithm for Integration of Active and Passive Vehicle Safety Systems in Frontal Collisions
Wallner, D., Eichberger, A. & Hirschberg, W., 2009, Proceedings of the 2nd International Multi-Conference on Engineering and Technological Innovation (IMETI), Volume I. ., p. 286-291Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Open Access
File
A Novel Virtual Development Process for Side Impact at Magna Steyr based on Numerical Simulations Verified by Component Testing
Eichberger, A., Michbronn, D., Wörgötter, F. & Fellner, B., 2007, EUROSIM Congress on Modelling and Simulation. ., p. 1-9Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Application Limits of the Complex Eigenvalue Analysis for Low-Frequency Vibrations of Disk Brake Systems
Huemer-Kals, S., Pürscher, M. & Fischer, P., 17 Sep 2017, SAE Technical Paper. 15 p. 2017-01-2494Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Brakes
Creep
Linearization
Bushings
Stick-slip
A Situation Based Method to Adapt the Vehicle Restraint System in Frontal Crashes to the Accident Scenario
Eichberger, A., Wallner, D., Hirschberg, W. & Cresnik, R., 2009, Proceedings of the 21th ESV Conference. ., p. 1-9Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research
Auslegung komfort-optimaler LKW-Fahrerhauslagerungen
Hirschberg, W. & Hofer, K., 1989, Schlussbericht 3.Internat. IVSS-Kolloquium "Vibration am Arbeitsplatz". Wien: AUVA, p. 150-156Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research
Open Access
File
Automation in Hardware-in-the-loop Units Development and Integration
Brayanov, N. P. & Eichberger, A., 25 Jul 2019, Proceedings of the 19th IEEE International conference on Software Quality, Reliability, and Security (QRS 2019). IEEE PublicationsResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Automatisiertes Laden von Elektrofahrzeugen mit konduktiven Ladestandards
Walzel, B., Hirz, M. & Brunner, H., May 2019, 40. Internationales Wiener Motorensymposium. Geringer, B. (ed.). Düsseldorf: VDI-Verlag Düsseldorf, Vol. 2. p. 462-476 (Fortschrittberichte VDI : Reihe 12, Verkehrstechnik, Fahrzeugtechnik; vol. 811,2).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Parking
Electric vehicles
Kinematics
Cables
Automation
Backward Driving Assistant for a Truck with Trailer - New Features with X-by-Wire
Waser, H. M., Horn, M. & Hirschberg, W., 2007, Proc. 11th European Automotive Congress (CD, CV05-2). ., p. 1-10Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research
Battery Thermal Simulation and Energy Management of Hybrid Commercial Vehicles
Ackerl, M., Pichler, G. & Breuer, G., 2010, Battery Technology Expo. ., p. 184-196Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research
Bewertung von Fahrerassistenzsystemen von Normalfahrerinnen und Normalfahrern im Realversuch
Eichberger, A., Lex, C., Bliem, N., Sternat, A. S., Koglbauer, I., Schinko, C., Battel, M. & Holzinger, J., 2014, 4. Jahrestagung der GMTTB (Gesellschaft für Medizinisch Technische Traumabiomechanik). ., p. 1-32Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research
Brake Creep Groan Noise - Vibration Mechanism and Simulation
Fischer, P., Pürscher, M. & Huemer-Kals, S., 7 Oct 2019, Proceedings of Aachen Colloquium Automobile and Engine Technology 2019. 21 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research
Brakes
Creep
Stick-slip
Bushings
Axles
Brake Squeal – Investigation of Different Brake Pad Materials
Wallner, D. & Bernsteiner, S., 2011, 13th EAEC European Automotive Congress. ., p. 1-8Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Bremsenquietschen als Messtechnische Herausforderung
Wallner, D., 2011, 1. VDI-Fachkonferenz Innovative Bremstechnik. ., p. nn-nnResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research
CAD – based synthesis of a window lifter mechanism
Harrich, A., Mayr, J., Hirz, M., Rossbacher, P., Lang, J., Gfrerrer, A. & Haselwanter, A., 2010, SAE World Congress. ., p. 1-10Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
CAD-basiertes Werkzeug zur Vorauslegung der Crashstruktur eines Frontendmoduls
Harrich, A., Sinz, W., Hirz, M. & Lorenzer, M., 2010, Kongress SIMVEC Berechnung und Simulation im Fahrzeugbau. Düsseldorf: Springer-VDI-Verlag GmbH & Co.KG, p. 585-600Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
CO2e-Emissionen verschiedener PKW-Technologien bei realen Nutzerverhalten im Produktlebenszyklus
Brunner, H., Hirz, M. & Fischer, P., 2016, Fortschritt-Berichte VDI Reihe 12 Nr. 799: 37. Internationales Wiener Motorensymposioum. Lenz, U-P. D. T. H-P. (ed.). Düsseldorf: VDI/VDE, Vol. 2. p. 429 - 446 18 p. (Fortschritt-Berichte VDI Reihe; vol. Reihe 12, no. 799).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
CO2 Reduction Potential of CFRP-Bodywork Concepts Considering Production and In-Use Phase
Schnöll, H. P., Brunner, H., Zottler, M., Hirz, M. & Ramsauer, C., 2015, Book of Abstracts - International Conference Management of Technology - Step to Sustainable Production. Zagreb: ., p. 39-39Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
CO2 Reduction Potential of CFRP-Bodywork Concepts Considering Production and In-Use Phase
Schnöll, H. P., Brunner, H., Zottler, M., Hirz, M. & Ramsauer, C., 2015, Proceedings International Conference Management of Technology - Step to Sustainable Production. ., p. 1-8Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review