• 8010

    Inffeldgasse 11 Graz

    Austria

Research Output 1977 2020

1. Grazer Symposium Virtuelles Fahrzeug 2008

Eichberger, A. (ed.) & Bernasch, J. (ed.), 2008, Eigenverlag Vif.

Research output: Book/ReportAnthologyResearch

3. Grazer Nutzfahrzeug Workshop

Hirschberg, W. (ed.) & Hirz, M. (ed.), 2008, Graz: Eigenverlag FTG.

Research output: Book/ReportAnthologyResearch

3. Kamingespräch der OVEyoungEngineers mit Univ.-Prof. Dr.-Ing. Uwe Schichler

Fabian, J., Mar 2015, In : e&i - Elektrotechnik und Informationstechnik. 2.2015

Research output: Contribution to journalArticleResearch

3D CAD parametric design strategies with interlinked CAE reference object creation for the overall vehicle layout optimization in the early automotive concept phase

Rossbacher, P., Hirz, M. & Dietrich, W., 2010, Fisita World Congress. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

3D Vision Guided Robotic Charging Station for Electric and Plug-in Hybrid Vehicles

Miseikis, J., Rüther, M., Walzel, B., Hirz, M. & Brunner, H., 2017.

Research output: Contribution to conferencePaperResearchpeer-review

4. Grazer Nutzfahrzeug Workshop

Hirschberg, W. (ed.) & Hirz, M. (ed.), 2010, Graz: Eigenverlag FTG.

Research output: Book/ReportAnthologyResearch

48 Volt Mild-Hybridization and its Impacts on CO2 Emissions

Pessl, B., Leitner, M. & Fabian, J., Sep 2016.

Research output: Contribution to conferencePaperResearchpeer-review

5. Grazer Nutzfahrzeug Workshop

Hirschberg, W. (ed.), Stadler, S. (ed.) & Hirz, M. (ed.), 2012, Graz: Eigenverlag FTG.

Research output: Book/ReportAnthologyResearch

6. Grazer Nutzfahrzeuge Workshop

Hirschberg, W. (ed.), Stadler, S. (ed.) & Hirz, M. (ed.), 2014, .

Research output: Book/ReportAnthologyResearch

6. Grazer Nutzfahrzeug Workshop

Hirschberg, W. (ed.), Fischer, P. (ed.) & Stadler, S. (ed.), 2014, Graz: Eigenverlag FTG.

Research output: Book/ReportAnthologyResearch

Abhängigkeit des Reibungskoeffizienten von Bremsscheibentemperatur, Bremsdruck und Fahrzeuggeschwindigkeit

Tonchev, A. A. & Hirschberg, W., 2006, UNITECH International Scientific Conference, Gabrovo. Gabrovo: University publishing house V.Aprilov, Vol. Volume 1. p. 517-521

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

About the Identification of Tyre Characteristics Based on Vehicle Dynamics Measurements

Kerschbaumer, A., Kollreider, D., Prettenthaler, C., Hirschberg, W., Schagerl, G. & Peinsitt, M., 2010, (Accepted/In press) Internationales Stuttgarter Symposium Automobil- und Motorentechnik. ATZlive GWV Fachverlage GmbH, Vol. 1. (10th Stuttgart International Symposium Automotive and Engine Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

About the influence of the truck on a driver's performance

Tengg, W., Weinfurter, H., Prettenthaler, C., Hirschberg, W., Haas, J. & Danner, C., 2011, 13th EAEC European Automotive Congress. ., p. 1-14

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Abschätzung des aerodynamischen Verhaltens in der konzeptionellen Fahrzeugentwicklung

Prenner, M., 2011

Research output: ThesisDiploma ThesisResearch

Abschlussbericht: Inbetriebnahme eines dynamischen Bremsen- und Radaufhängungsprüfstands

Harrich, A., 2008, Graz: .

Research output: Book/ReportOther reportResearch

Abstandhalten ist Frauensache

Kluger, B., Lex, C. & Eichberger, A., 4 Aug 2015, Kleine Zeitung / Stadtausgabe, p. 16-17.

Research output: Contribution to specialist publicationArticleResearch

Abweisvorrichtung bei teilüberdeckter Frontalkollision für Kraftfahrzeuge

Schönberger, G., Breitenhuber, W., Schimpl, W., Eichberger, A. & Pernkopf, F., 24 Aug 2006, Patent No. WO 002006086818 A1

Research output: PatentResearch

ABWEISVORRICHTUNG BEI TEILÜBERDECKTER FRONTALKOLLISION FÜR KRAFTFAHRZEUGE

Eichberger, A., Hubmann, F., Pernkopf, F., Schimpl, W. & Winkler, S., 24 Nov 2005, Patent No. WO002005110815, Priority date 17 May 2005

Research output: PatentResearch

A CAD-based layout environment for a semi-automated test bench assembly

Gradwohl, C., Stadler, S., Hirz, M. & Waser, H. M., 2015, In : Computer-aided design and applications. 12, 5, p. 617-626

Research output: Contribution to journalArticleResearchpeer-review

A Car2X Sensor Model for Virtual Development of Automated Driving

Eichberger, A., Markovic, G., Magosi, Z. F., Rogic, B., Lex, C. & Samiee, S., 7 Sep 2017, International Journal of Advanced Robotic Systems, 14, 5 12 p.

Research output: Contribution to specialist publicationArticleResearchpeer-review

Open Access
Sensors
Adaptive cruise control
Communication
Computer simulation
Testing

Accuracy of Friction Estimation during Driving

Kobialka, H-U. & Lex, C., 2013, Conference Design of Experiments (DOE) in Engine Development. Renningen: expert verlag GmbH , p. 190-197 (Design of Experiments (DoE) in Engine Development).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Friction
Sensors
Recurrent neural networks
Tires
Time series

AC Motor Design and Evaluation for Automotive Traction Applications

Willberger, J., 2011

Research output: ThesisDoctoral ThesisResearch

AC Motor Design and Evaluation for Automotive Traction Applications

Willberger, J., 2012, Graz, Österreich: Eigenverlag FTG.

Research output: Book/ReportOther reportResearch

A Comparison Study of Active Head Restraints for Neck Protection in Rear-End Collisions

Bigi, D., Heilig, A., Steffan, H. & Eichberger, A., 1998, Proceeedings of the 16th ESV Conference, 1998. ., p. 1103-1110

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

A complete strategy for efficient and accurate multibody dynamics of flexible structures with large lap joints considering contact and friction

Pichler, F., Witteveen, W. & Fischer, P., 1 Aug 2017, In : Multibody System Dynamics. 40, 4, p. 407-436 30 p.

Research output: Contribution to journalArticleResearchpeer-review

Flexible Structure
Multibody Dynamics
Flexible structures
Component Mode Synthesis
Friction

A Comprehensive Algorithm for Automatic Emergency Lane-change

Samiee, S., Shao, L., Rogic, B., Eichberger, A., Azadi, S. & Kazemi, R., 14 Aug 2017.

Research output: Contribution to conferencePaperResearch

A contribution to advanced knowledge-based design in the development of complex mechanical products

Stadler, S. & Hirz, M., 2013, ICED13 - Design for Harmonies. ., p. 1-15

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Contribution to Optimized Data Exchange Supporting Automotive Bodywork Engineering

Kreis, A., Hirz, M. & Stadler, S., 2020, In : Computer-aided design and applications. 17, 1, p. 187-189

Research output: Contribution to journalArticleResearchpeer-review

Automotive engineering
Data Exchange
Electronic data interchange
Data Management
Development Process

Acoustic Simulation - Run Up Analysis of New Audi V8 Otto Engine

Fischer, P., 2002, (Accepted/In press) Fisita 2002 World Automotive Conference. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Active Torque Split System / Friction Monitoring System – PROMETHEUS, Final Report

Hirschberg, W., Holzinger, J., Lanzer, H. & Weinzerl, A., 1993, Graz, Österreich: .

Research output: Book/ReportOther reportResearch

Open Access
File

A Development Process for Creating Finite-Element Models of Crash Test Dummies Based on Investigations of the Hardware

Rieser, A., Nußbaumer, C., Eichberger, A. & Steffan, H., 2009, Proceedings of the 21th ESV Conference. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

A driver model for virtual control system development

Fischer, R., Butz, T., Ehmann, M. & Vockenhuber, M., 2011, In : Automobiltechnische Zeitschrift. 11, 6, p. 22-25

Research output: Contribution to journalArticleResearch

Advanced 3D-CAD Design Methods in Education and Research

Hirz, M., Harrich, A. & Rossbacher, P., 2009, The 2nd International Multi-Conference on Engineering and Technological Innovation. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Advanced 3D-CAD Design Methods in Education and Research

Hirz, M., Harrich, A. & Rossbacher, P., 2010, In : Journal of systemics, cybernetics and informatics. 7, 6, p. 30-34

Research output: Contribution to journalArticleResearchpeer-review

Advanced Computer Aided Design in Conceptual Automotive Development

Hirz, M., 2011

Research output: ThesisHabilitationResearch

Open Access
File

Advanced computer aided design methods for integrated virtual product development processes

Hirz, M., Harrich, A. & Rossbacher, P., 2011, In : Computer-aided design and applications. 8, 6, p. 901-913

Research output: Contribution to journalArticleResearchpeer-review

Advanced computer aided design methods for integrated virtual product development processes

Hirz, M., Harrich, A. & Rossbacher, P., 2011, CAD Conference 2011. ., p. 1-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Advanced Crash Simulation Spotweld

Heubrandtner, T., Eichberger, A., Scherjau, D., Rangger, G. & Hodzic, A., 10 Jun 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Aerodynamic investigations in conceptual vehicle development supported by integrated design and simulation methods

Hirz, M., Stadler, S., Prenner, M. & Mayr, J., 2012, FISITA World Congress 2012. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Aerodynamische Grundsatzuntersuchungen an einem LKW-Hängerzug

Stadler, S. & Hirz, M., 2011, .

Research output: Book/ReportOther reportResearch

Aerodynamische Optimierung von Fernverkehr-Sattelzügen

Stadler, S., 2010

Research output: ThesisDiploma ThesisResearch

A History-Based Load Requirement Prediction Algorithm, for Predictive Hybrid- and Thermal Operation Strategies

Karoshi, P., Tieber, K., Kneissl, C., Peneder, G., Kraus, H., Hofstetter, M., Fabian, J. & Ackerl, M., 14 Apr 2016, SAE - World Congress 2016. SAE International, 2016-01-1238

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A knowledge-based framework for integration of computer aided styling and computer aided engineering

Stadler, S. & Hirz, M., 2016, In : Computer-aided design and applications. 13, 4, p. 558-569

Research output: Contribution to journalArticleResearchpeer-review

Aktive Fahrerunterstützung durch Störgrößenkompensation mittels Steer-by-Wire im Nutzfahrzeug

Weinfurter, H. & Hirschberg, W., 4 Apr 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Aktive Fahrwerkssysteme am Beispiel einer neuen Hinterachslenkung ...hilft es auch dem Reifen?

Scholz, R., Rosinger, W., Eitzinger, S. & Kober, W., 2008, 6. Tag des Fahrwerks. ., p. 1-39

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Aktuelle Forschungsthemen und innovative Trends der Elektromobilität in Österreich

Fabian, J., Brunner, H., Hirz, M., Wieland, T., Schmautzer, E., Fickert, L., Wegleiter, H., Slupetzky, W. & Schmied, R., 2014, (Accepted/In press) Innehalten und Ausblick: Effektivität und Effizienz für die Energiewende. Graz: Technische Universität Graz

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Akustikberechnung lokal gedämpfter Motorstrukturen unter Einbeziehung stochastischer Erregerprozesse.

Fischer, P., 2000, VDI Berichte 1559: Berechnung und Simulation im Fahrzeugbau,VDI-Gesellschaft Fahrzeug- und Verkehrstechnik. ., p. 121-144

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch