• 8010

    Technikerstraße 4 Graz

    Austria

Research Output

Filter
Conference contribution
2019

Generalization of Adaptive Cross Approximation for a Convolution Quadrature based Boundary Element Method

Haider, A. M. & Schanz, M., 2019, Waves 2019: 14th International Conference on Mathematical and Numerical Aspects of Wave Propagation. Book of Abstracts. Kaltenbacher, M., Melenk, J. M., Nannen, L. & Toth, F. (eds.). Wien, p. 172-173

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Modelling Grain Fragmentation in Hypoplasticity

Bauer, E., 1 Jan 2019, Desiderata Geotechnica. Wu, W. (ed.). Springer-Verlag Italia, p. 1-20 20 p. (Springer Series in Geomechanics and Geoengineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Space-Time Boundary Elements for the Acoustic Wave Equation

Pölz, D. & Schanz, M., 2019, Waves 2019: 14th International Conference on Mathematical and Numerical Aspects of Wave Propagation. Book of Abstracts. p. 188-189

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2018

Modal analysis and flanking sound insulation in connected panels of cross-laminated-timber at low frequencies

Buchegger, B., Ferk, H. & Schanz, M., 28 May 2018, Euronoise 2018 - Conference Proceedings. p. 1541-1548 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reproducing rolling contact fatigue relevant loading conditions of railway operation on a test rig

Trummer, G., Kupelwieser, F., Marte, C., Scheriau, S., Dietmaier, P. & Six, K., 1 Jan 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. TU Delft, p. 993-998 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

Fast Multipole accelerated Boundary Element Method for Poroelastodynamics

Schanz, M., 2017, POROMECHANICS VI: Proc. of the sixth Biot conference on poromechanics. Vandamme, M., Dangla, P., Pereira, J-M. & Ghabezloo, S. (eds.). ASCE, p. 1698-1705 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modelling grain damage under plane strain compression using a micro-polar continuum

Bauer, E., Li, L. & Khosravi, M., 2017, Proceedings of the 11th International Workshop on Bifurcation and Degradation in Geomaterials: Springer Series in Geomechanics and Geoengineering. Springer Publication, p. 539-546 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical simulation of postconstruction deformation of a concrete face rockfill dam

Khosravi, M., Li, L. & Bauer, E., 2017, Proceedings of the 4th International Conference on Long-Term Behaviour and Environmentally Friendly Rehabilitation Technologies of Dams: LTBD 2017. Noorzad, A., Bauer, E. & Ghaemian, M. (eds.). Verlag der Technischen Universität Graz, p. 307-314 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

On Lyapunov stability in hypoplasticity

Kovtunenko, V., Krejci, P., Bauer, E., Sivakova, L. & Zubkova, A., 2017, Proceedings of EQUADIFF 2017 Conference. Mikula, K., Ševčovič, D. & Urbán, J. (eds.). Slovak University of Technology, p. 107-116 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

The seepage behavior of a high concrete face rockfill dam on alluvium deposit

Cen, W., Li, D. & Bauer, E., 2017, Proceedings of the 4th International Conference on Long-Term Behaviour and Environmentally Friendly Rehabilitation Technologies of Dams. Verlag der Technischen Universität Graz, p. 620-626 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

White Etching Layer und deren Einfluss auf Rissinitiierung an der Schienenoberfläche

Bernsteiner, C., Meierhofer, A., Six, K., Künstner, D. & Dietmaier, P., 2017, 15. Internationale Schienenfahrzeugtagung Rad Schiene - Tagungsband 2017. 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

A Micro-Polar Hypoplastic Approach to Interface Shear Behavior of Granular Materials

Ebrahimian, B. & Bauer, E., 2016, Proceedings of the 5th International Conference on Geotechnical Engineering and Soil Mechanics. Tehran

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effects of Wave Transformation in Junctions of Cross-Laminated-Timber

Buchegger, B., Ferk, H. & Schanz, M., 22 Aug 2016, WCTE 2016 - World Confererence of Timber Engineering. Technische Universität Wien

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hypoplastic modeling of soils and rockfills

Bauer, E., 2016, Proceedings of the 5th International Conference on Geotechnical Engineering and Soil Mechanics. Tehran

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wave Conversion in Coupled Plates of Cross Laminated Timber: A Case Study of the Effect and its Consequences

Buchegger, B., Ferk, H. & Schanz, M., 17 Mar 2016, DAGA 2016 - 42. Deutsche Jahrestagung für Akustik.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2015

A Comparison of Inverse Transformations for Elastodynamic Boundary Element Method

Schanz, M., Ye, W. & Xiao, J., 2015, Abstracts for USNCCM13. ., p. online-available

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A wheel-rail creep force model considering normal stress and temperature dependent plasticity effects

Meierhofer, A., Müller, G., Six, K. & Dietmaier, P., 2015, International Symposium on Dynamics of Vehicles on Roads and Tracks. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Comparison of the calibration and performance of two dierent constitutive models for rockll materials

Wang, Z., Li, L. & Bauer, E., 2015, Long-Term Behaviour and Environmentally Friendly Rehabilitation Technologies of Dams. Graz: Verlag der Technischen Universität Graz, p. 3-4

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of white etching layers on rails: Simulations and experiments

Bernsteiner, C., Müller, G., Meierhofer, A., Six, K., Künstner, D. & Dietmaier, P., 2015, International Conference on Contact Mechanics and Wear of Rail/Wheel Systems. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hypoplastic constitutive modelling of grain damage under plane shearing

Bauer, E., Li, L. & Huang, W., 2015, Bifurcation and Degradation of Geomaterials in the New Millennium. Springer Verlag, p. 181-188 8 p. (Springer Series in Geomechanics and Geoengineering; vol. none).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of direct shear interface test using micro-polar continuum approach

Ebrahimian, B. & Bauer, E., 2015, Springer Series in Geomechanics and Geoengineering. Springer Verlag, Vol. none. p. 143-148 6 p. (Springer Series in Geomechanics and Geoengineering; vol. none).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modeling wear and rolling contact fatigue: Parametric study and experimental results

Trummer, G., Marte, C., Scheriau, S., Dietmaier, P., Sommitsch, C. & Six, K., 2015, International Conference on Contact Mechanics and Wear of Rail/Wheel Systems. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical investigation of the influence of grain damage on the evolution of shear bands

Bauer, E., Li, L. & Huang, W., 2015, Book of Abstracts of the International Conference on Continuous Media with Microstructure. Poznan: Publishing House of the Poznan University of Technology, p. 27-28

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sensitivity analysis: Main parameters causing wear and rolling contact fatigue in wheel-rail contact

Marte, C., Trummer, G., Aichmayr, A., Dietmaier, P. & Six, K., 2015, International Symposium on Dynamics of Vehicles on Roads and Tracks. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2013

A Directional Fast Multipole Method for Elastodynamics

Traub, T. & Schanz, M., 2013, IABEM 2013 Proceedings. ., p. 146-151

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boundary Element Formulation for Partially Saturated Poroelastic Media

Li, P. & Schanz, M., 2013, Proceedings of the Fifth Biot Conference on Poromechanics. ASCE, p. 834-843

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

Schädigungsrelevanz unterschiedlicher Drehgestellkonzepte hinsichtlich Verschleiß und Rollkontaktermüdung im U-Bahnbetrieb

Marte, C., Six, K., Trummer, G. & Dietmaier, P., 2013, ZEVrail Zeitschrift für das gesamte System Bahn, Sonderheft Tagungsband. ., p. 142-151

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sparse and H-Matrix Representation Techniques applied to indirect Time-Domain BEM in Elastodynamics

Kager, B. & Schanz, M., 2013, Proceedings of the Symposium of the IABEM 2013. ., p. on-CD

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Time Domain BE Formulation for Partially Saturated Poroelasticity

Li, P. & Schanz, M., 2013, Proceedings of the Symposium of the IABEM 2013. ., p. on-CD

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012

An approximate model to predict near-surface ratcheting of rails under high traction coefficients

Trummer, G., Six, K., Marte, C., Dietmaier, P. & Sommitsch, C., 2012, Proceedings 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems. ., p. 344-351

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Application of the Boundary Element Method to the Thermal Analysis of Hot Forming Tools

Weiß, W., Kolleck, R., Schanz, M. & Messner, M., 2012, Lightweighting: Possibilities & Challenges. ., p. 105-110

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Third Body Layer - Experimental Results and a Model Describing its Influence on the Traction Coefficient

Meierhofer, A., Hardwick, C., Lewis, R., Six, K. & Dietmaier, P., 2012, Proceedings of 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems. ., p. 335-343

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2011

A simple hypoplastic model for simulating the mechanical behaviour of MBT waste

Petrović, I. & Bauer, E., 2011, Computational Geomechanics, COMGEO II - Proceedings of the 2nd International Symposium on Computational Geomechanics. p. 337-346 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Constitutive Modelling of Rheological Properties of Materials for Rockfill Dams

Bauer, E., Z, F. & Liu, S., 2011, Proceedings of the 6th International Conference on Dam Engineering. Lisbon, p. 1-14

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Der Rad-Schiene Kontakt: Multi-physikalische Effekte und deren Modellbildung

Tomberger, C., Rosenberger, M., Six, K. & Dietmaier, P., 2011, Tagungs CD Rad-Schiene Dresden. ., p. 1-21

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of the interaction between pressure, density and rheological properties of rockfill materials

Bauer, E., Fu, Z. & Liu, S., 2011, Studies on Modern Technologies and Long-term Behavior of Dams. ., p. 417-424

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Messung und Simulation von Verschleiß und Rollkontaktermüdung im U-Bahnbetrieb

Marte, C., Trummer, G., Dietmaier, P., Fischmeister, E., Oberhauser, A., Six, K. & Stock, R., 2011, Internationale Schienenfahrzeugtagung. ., p. 1-24

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Micro-and Macro Modelling of the Influence of Grain Crushing of a Cohesionless Granular Material under Compression

Bauer, E., 2011, Proceedings for the II International Conference on Particle - Based - Methods (Particles 2011). Barcelona, p. 26-28

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2010

An Elastic Rope Model with Application to Automated People Mover Systems

Nußbaumer, C. & Dietmaier, P., 2010, Proceedings of the 1st International Conference on Multibody System Dynamics. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evolution of swelling pressure of cohesive frictional, rough and elasto-plastic granulates

Luding, S. & Bauer, E., 2010, Proc. of International Symposium on Geomechanics and Geotechnics: From Micro to Macro. Jiang, M., Liu, F. & Bolton, M. (eds.). London: Taylor & Francis Group, p. 495-499

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Infinite elements in saturated porous media

Nenning, M. J. & Schanz, M., 2010, Proceedings ECCM 2010. ., p. on-CD

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modeling rheological properties of coarse grained materials

Bauer, E., 2010, Proc. of ASCE, GeoFlorida. ., Vol. 199. p. 430-439 (Geotechnical Special Publication).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modelling limit states within the framework of hypoplasticity

Bauer, E., 2010, AIP Conference Proceedings. ., p. 290-305

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2009

A Fast Elastodynamic Boundary Element Formulation in Time Domain

Schanz, M. & Messner, M., 2009, Short Papers - 18th International Conference on Computer Methods in Mechanics. Zielona Gora: The University of Zielona Gora Press, p. 405-406

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An alternative approach in deriving poroelastic plate theories

Nagler, L. & Schanz, M., 2009, CMM 2009 Short Papers. Zielona Gora: ., p. 327-328

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

Consistent Poroelastodynamic Plate Theories

Schanz, M. & Nagler, L., 2009, Poromechanics IV. Lancaster: DEStech Publications, Inc, p. 878-883

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fast Time Dependent Boundary Element Method based on ACA and the Convolution Quadrature Method

Schanz, M. & Messner, M., 2009, Advances in Boundary Element Techniques X. Eastleigh, UK: EC Ltd., p. 265-270

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction in Wheel-Rail Contact: A Model Comprising Interfacial Fluids, Surface Roughness and Temperature

Tomberger, C., Dietmaier, P., Sextro, W. & Six, K., 2009, International Conference on Contact Mechanics and Wear of Rail/Wheel Systems. ., p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

Hypoplastic Constitutive Modelling of the Long Term Behaviour and Wetting Deformation of Weathered Granular Materials

Fu, Z. & Bauer, E., 2009, Proc. of the 2nd Int. Conference on Long Term Behaviour of Dams. ., p. 473-478

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modelling limit states within the framework of hypoplasticity

Bauer, E., 2009, Mathematical Modeling and Physical Instances of Granular Flows, Book of Abstracts. ., p. 10-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution