• 8010

    Inffeldgasse 24 Graz

    Austria

Research Output 2000 2019

Filter
Conference contribution
2016

BIRCH | GLT+CLT - Mechanical properties of Glued Laminated Timber and Cross Laminated Timber produced with the wood species birch

Jeitler, G., Augustin, M. & Schickhofer, G., 22 Aug 2016, WCTE 2016: World Conference on Timber Engineering. Technische Universität Wien, 8 p. MS1-07:2

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Block shear fialure mode of axially loaded groups of screws

Mahlknecht, U., Brandner, R. & Augustin, M., 23 Aug 2016, World Conference on Timber Engineering 2016, Vienna.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Fasteners
Failure modes
Lead screws
Fibers
Stiffness

Buckling loads for cross-laminated timber elements under uniaxial in-plane compression

Thiel, A. & Krenn, H., Aug 2016, Proceedings of the World Conference on Timber Engineering (WCTE 2016). 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Durchbrüche in Tragstrukturen aus BSH und BSP

Dröscher, J., Augustin, M. & Schickhofer, G., 1 Sep 2016, VERSORGEN und UMHÜLLEN im Holzbau: Schnittstellen des Holzbaus zur Gebäude- und Fassadentechnik. 170 ed. Verlag der Technischen Universität Graz, 20 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Experimental and calculation methods on screw gluing for CLT members

Bratulic, K., 2016, Holzbau Forschung + Praxis. p. 81-90

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Mechanical properties of a composite lamella built up with thin sideboards and its utilization to increase the material efficiency of structural elements

Sieder, R., Augustin, M. & Lierzer, T., 22 Aug 2016, Proceedings World Conference on Timber Engineering 2016. 9 p. GS1-02:2

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modularisierung der Holz-Massivbauweise in Brettsperrholz - Analyse und Fügung

Ganster, K., 1 Sep 2016, 2. Klagenfurter Holzbau-Fachtagung - Versorgen und Umhüllen im Holzbau. 36 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Screw gluing - theoretical and experimental approach on screw pressure distribution and glue line strength

Bratulic, K. & Augustin, M., 2016, WCTE2016 Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Timber-Steel-Composite: A Possibility for Hybrid Structures of Long Span Timber Floors

Zimmer, S. & Augustin, M., Aug 2016, WCTE 2016 - World Conference on Timber Engineering - Proceedings. Technische Universität Wien

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

ULS Design of CLT Elements – Basics and some Special Topics

Thiel, A. & Brandner, R., Mar 2016, Joint Conference of COST Actions FP1402 and FP1404 Cross Laminated Timber – a competitive wood product for visionary and fire safe buildings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Untersuchung und Nachweisführung auflagernah ausgeklinkter BSH|BSP-Plattenbalkenquerschnitte

Augustin, M. & Zimmer, S., 2016, 2. Klagenfurter Holzbau-Fachtagung: Versorgen und Umhüllen im Holzbau. Schickhofer, G. & Ringhofer, A. (eds.). Verlag der Technischen Universität Graz

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Versagensmechanismen bei axial beanspruchten Schraubengruppen in Abhängigkeit ihrer Anordnung

Mahlknecht, U., 1 Mar 2016, Doktorandenkolloquium Holzbau Forschungs + Praxis. p. 3 - 11

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Vibrational Behaviour of Cross Laminated Timber Floors in Residential Buildings

Zimmer, S. & Augustin, M., Aug 2016, WCTE 2016 - World Conference on Timber Engineering - Proceedings. Technische Universität Wien

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2015

Concentrated load introduction in CLT elements perpendicular to plane

Bogensperger, T. & Jöbstl, R. A., 2015, (Accepted/In press) INTERNATIONAL COUNCIL FOR RESEARCH AND INNOVATION IN BUILDING AND CONSTRUCTION WORKING COMMISSION W18 - TIMBER STRUCTURES CIB-W18. Karslruhe, Germany: .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Mit neuen Tragelementen in die Zukunft des Holzbaus

Schickhofer, G., Bauer, H. & Thiel, A., 2015, Moderner Massivbau aus Holz - vom Einfamilienhaus bis zum Hochhaus. Zürich: S-WIN Eigenverlag, p. 157-174

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Serial Correlation of Withdrawal Properties from Axially-Loaded Self-Tapping Screws

Brandner, R., Bratulic, K. & Ringhofer, A., 2015, (Accepted/In press) Proceedings of the 12th International Conference on Applications of Statistics and Probability in Civil Engineering (ICASP12). .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Systemverbinder zur Abtragung dynamischer Beanspruchungen

Mahlknecht, U. & Sieder, R., 2 Dec 2015, Internationales Holzbau-Forum (IHF 2015) : Aus der Praxis - Für die Praxis.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2014

Joining of CLT Elements - Latest Findings in Graz

Bratulic, K. & Brandner, R., 2014, (Accepted/In press) International professional workshop on Wood Structures. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Monotonic and cyclic behaviour of joints with self-tapping screws in CLT structures

Bratulic, K., Flatscher, G. & Brandner, R., 2014, COST Action FP1004 Experimental Research with Timber. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Screwed Joints in Cross Laminated Timber Structures

Flatscher, G., Bratulic, K. & Schickhofer, G., 2014, WCTE2014 Conference Proceedings. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

ULS and SLS design of CLT in- and out-of-plane

Thiel, A., 2014, CLT Training Course - Structural design of Cross Laminated Timber (CLT), VOL.1. Trento: University of Trento - Italy, Department of Civil, Environmental and Mechanical Engineering, p. 69-97

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

CLT and floor vibrations: A comparison of design methods

Thiel, A., 2013, (Accepted/In press) INTERNATIONAL COUNCIL FOR RESEARCH AND INNOVATION IN BUILDING AND CONSTRUCTION WORKING COMMISSION W18 - TIMBER STRUCTURES CIB-W18. Karlsruhe, Germany: .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

In plane Shear Strength of Cross Laminated Timber (CLT): Test Configuration, Quantification and influencing Parameters

Brandner, R., Bogensperger, T. & Schickhofer, G., 2013, (Accepted/In press) INTERNATIONAL COUNCIL FOR RESEARCH AND INNOVATION IN BUILDING AND CONSTRUCTION WORKING COMMISSION W18 - TIMBER STRUCTURES CIB-W18. Karslruhe, Germany: .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

ULS and SLS design of CLT and its implementation in the CLTdesigner

Thiel, A., 2013, Focus Solid Timber Solutions - European Conference on Cross Laminated Timber (CLT). Bath: University of Bath, p. 77-102

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2011

Modellierung geklebter Stösse am Beispiel Hochregallager

Thiel, A., 2011, Aus der Praxis - Für die Praxis. ., p. 1-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Properties of CLT-Panels Exposed to Compression Perpendicular to their Plane

Bogensperger, T., Augustin, M. & Schickhofer, G., 2011, Proceedings to International Council for Research and Innovation in Building and Construction, Working Commission W18 - Timber Structures, Meeting. Karlsruhe/D: ., p. 1-15

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2010

CLTdesigner - A software tool for designing cross laminated timber (CLT) elements

Thiel, A. & Schickhofer, G., 2010, WCTE 2010 Conference Proceedings. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Holz-Massivbauweise in Brettsperrholz – Allgemeines zur Bauweise und Nachweise auf Basis des europäischen Normenkonzepts

Thiel, A. & Schickhofer, G., 2010, Aus der Praxis - Für die Praxis. ., p. 1-19

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Nachweisführung für SHERPA-Verbindungen auf Basis des SHERPA-Handbuchs

Flatscher, G. & Augustin, M., 2010, Aus der Praxis - Für die Praxis. ., p. 1-16

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

On connecting panels of freeform bulding envelopes - A parametrical controlled connector system for non-standard CLT-structures using processed standard elements

Schimek, H., Meisel, A. & Bogensperger, T., 2010, CAAD | Cities | Sustainability. Aberdeen, UK: Robert Gordon University, p. 171-178

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Potential of Short Knot-Free Board Sections for Glued Laminated Timber Production

Kastner, E., Brandner, R. & Schickhofer, G., 2010, WCTE 2010 Conference Proceedings. ., p. 2-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Verification of CLT-plates under loads in plane

Bogensperger, T., Moosbrugger, T. & Silly, G., 2010, World Conference on Timber Engineering. ., p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2009

Abtragung hoher Lasten mit Sherpa-Systemverbindern

Augustin, M., 2009, Forum Holz Bau Garmisch 09. Biel: ., p. 1-21

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Realitätsnahe Modellbildung von Dachstühlen - dargestellt am Beispiel eines historischen "Grazer Dachstuhls"

Meisel, A., 2009, Bestandsanalyse und Instandhaltung von Holzkonstruktionen. Graz: Verlag der Technischen Universität Graz, p. J1-J21

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2008

Determination of Shear Modulus by means of standardized four-point Bending Tests

Brandner, R., Freytag, B. & Schickhofer, G., 2008, CIB-W18. Karlsruhe: ., p. 1-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Modellbildung für DUO-, TRIO- und QUATTRO-Querschnitte

Jeitler, G. & Brandner, R., 2008, Modellbildug für Produkte und Konstruktionen aus Holz - Bedeutung von Simulation und Experiment. Graz: Verlag der Technischen Universität Graz, p. C-1-C-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

"Proof loading" als qualitätssichernde Maßnahme im Holzbau - Von der Vision zur Normung

Jeitler, G. & Schickhofer, G., 2008, Wiener Leimholz Symposium 2008. Wien: ., Vol. 18. p. 25-38 (HFA-Schriftenreihe).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Sanierung von zwei Häörsäalen des "Campus Croix Rouge" der Universität Reims

Hübner, U., 2008, Dřevostavby 2008. Volyně: Vyšší odborná škola a Střední průmyslová škola, p. 49-64

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

SCALING - Betrachtung von Skalenebenen in der Materialstruktur Holz in Verbindung mit der Anwendung von Modellansätzen

Brandner, R., 2008, Modellbildug für Produkte und Konstruktionen aus Holz - Bedeutung von Simulation und Experiment. Graz: Verlag der Technischen Universität Graz, p. B-01-B-48

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2007

Bearing model for glued laminated timber in bending – new aspects concerning modelling

Brandner, R. & Schickhofer, G., 2007, COST E 55 Workshop - Graz. ., p. 1-31

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Behavior of Glulam in Compression Perpendicular to Grain in different Strength Grades and Load Configurations

Augustin, M., Ruli, A., Brandner, R. & Schickhofer, G., 2007, COST E55 - Modelling of the performance of timber structures - 2nd Workshop and 4th MC Meeting - Eindhoven University of Technology. ., p. 1-16

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Determination of Modulus of Shear and Elasticity of Glued Laminated Timber and related Examinations

Brandner, R., Gehri, E., Bogensperger, T. & Schickhofer, G., 2007, International Council for Research and Innovation in Building and Construction - Working Comission W18 - Timber Structures Meeting Forty. Germany: ., p. 40-12-2_1-40-12-2_20

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Die Festigkeitskenngröße "Lochleibung" (Stabdübel) für die Laubholzart Esche

Hübner, U., 2007, Verbindungstechnik im Ingenieurholzbau. Graz: Verlag der Technischen Universität Graz, p. C1-C35

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Einführung in die Verbindungstechnik mit Stabdübeln, Schrauben und eingeklebten Stahlstangen

Schickhofer, G., Augustin, M. & Jeitler, G., 2007, Verbindungstechnik im Holzbau. Graz: Verlag der Technischen Universität Graz, Vol. 6. p. A1-A66 (Grazer Holzbau-Fachtagung).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

From the fabrication to the maintenance - A report of the Mur River Wooden Bridge in Styria/Austria

Unterwieser, H. & Schickhofer, G., 2007, ARCH'07 - 5th International Conference on Arch Bridges. Guimaraes, Portugal: Multicomp, Lda., p. 767-774

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Grading Criteria for Beech and Ash used as Building Material

Hübner, U. & Leeb, W., 2007, 3rd European Hardwood Conference. Sopron: ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Pre-grading of sawn timber in green condition

Unterwieser, H., 2007, Quality Control for Wood and Wood Products. ., p. 161-166

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Size effect considerations for linear structural elements of timber

Brandner, R., Bogensperger, T., Jeitler, G. & Schickhofer, G., 2007, COST E55 - Modelling of the performance of timber structures - 2nd Workshop and 4th MC Meeting - Eindhoven University of Technology. ., p. 1-19

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Tensile Proof Loading to Assure Quality of Finger-Jointed Structural Timber

Jeitler, G. & Schickhofer, G., 2007, Quality Control for Wood and Wood Products. Warschau: ., p. 55-62

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2006

Behavior of Glulam in Compression Perpendicular to grain in Different Strength Grades and Load Configurations

Augustin, M., Ruli, A., Brandner, R. & Schickhofer, G., 2006, WCTE - 9th World Conference on Timber Engineering. Portland, OR / USA: ., p. 829-836

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review