• 8010

    Inffeldgasse 24 Graz

    Austria

Research Output 2000 2019

2019

Basic steel properties of self-tapping timber screws exposed to cyclic axial loading

Ringhofer, A., Augustin, M. & Schickhofer, G., 30 Jun 2019, In : Construction & building materials. 211, p. 207-216 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Steel
Timber
Fatigue of materials
Load limits
Bearing capacity

Block shear failure mechanism of axially-loaded groups of screws

Mahlknecht, U. & Brandner, R., 2019, In : Engineering Structures. 183, p. 220-242 23 p.

Research output: Contribution to journalArticleResearchpeer-review

Timber
Fibers
Fasteners
Stress concentration

Investigations concerning screw press gluing (SPG) with special focus on CLT/GLT ribbed plates

Bratulic, K., Augustin, M. & Schickhofer, G., 2019, (Submitted).

Research output: Contribution to conferencePosterResearch

2017

Evaluation and approximation of timber connection properties for displacement-based analysis of CLT wall systems

Flatscher, G., May 2017

Research output: ThesisDoctoral ThesisResearch

Evaluation and approximation of timber connection properties for displacement-based analysis of CLT wall systems

Flatscher, G., Schickhofer, G. (ed.) & Brandner, R. (ed.), 2017, Graz: Verlag der Technischen Universität Graz. (Monographic Series TU Graz: Timber Engineering & Technology; vol. TET 6)

Research output: Book/ReportBookResearchpeer-review

BIRCH | GLT+CLT - Mechanical properties of Glued Laminated Timber and Cross Laminated Timber produced with the wood species birch

Jeitler, G., Augustin, M. & Schickhofer, G., 22 Aug 2016, WCTE 2016: World Conference on Timber Engineering. Technische Universität Wien, 8 p. MS1-07:2

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Block Shear Failure Mode of Axially Loaded Groups of Screws

Mahlknecht, U., Brandner, R. & Augustin, M., 2016. 2 p.

Research output: Contribution to conferenceAbstractResearchpeer-review

Block shear fialure mode of axially loaded group of screws

Mahlknecht, U., Brandner, R. & Augustin, M., 23 Aug 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Fasteners
Failure modes
Lead screws
Fibers
Stiffness

Block shear fialure mode of axially loaded groups of screws

Mahlknecht, U., Brandner, R. & Augustin, M., 23 Aug 2016, World Conference on Timber Engineering 2016, Vienna.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Fasteners
Failure modes
Lead screws
Fibers
Stiffness

BSP-Verbindung mit Aluminiumprofil und Bohrstabdübel

Flatscher, G. & Augustin, M., Dec 2016, 40 p.

Research output: Other contributionResearch

BSP Wände

Flatscher, G., 25 Nov 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

BSP-Wiki & CLTdesigner

Thiel, A., 25 Nov 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Buckling loads for cross-laminated timber elements under uniaxial in-plane compression

Thiel, A. & Krenn, H., Aug 2016. 2 p.

Research output: Contribution to conferenceAbstractResearchpeer-review

Buckling loads for cross-laminated timber elements under uniaxial in-plane compression

Thiel, A. & Krenn, H., Aug 2016, Proceedings of the World Conference on Timber Engineering (WCTE 2016). 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Buckling loads for cross-laminated timber elements under uniaxial in-plane compression

Thiel, A. & Krenn, H., 23 Aug 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

CLT floor vibrations: latest findings

Thiel, A., 11 Mar 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of Verification and Reinforcement Concepts for Timber Beams with Large Round Holes

Dröscher, J., Augustin, M. & Schickhofer, G., 24 Aug 2016. 10 p.

Research output: Contribution to conferencePaperResearch

Cross laminated timber (CLT): overview and development

Brandner, R., Flatscher, G., Ringhofer, A., Schickhofer, G. & Thiel, A., Mar 2016, In : European Journal of Wood and Wood Products. 74, 3

Research output: Contribution to journalArticleResearchpeer-review

Durchbrüche in Tragstrukturen aus BSH und BSP

Dröscher, J., Schickhofer, G. & Augustin, M., 2016, Graz: .

Research output: Book/ReportOther reportResearch

Durchbrüche in Tragstrukturen aus BSH und BSP

Dröscher, J., Augustin, M. & Schickhofer, G., 1 Sep 2016, VERSORGEN und UMHÜLLEN im Holzbau: Schnittstellen des Holzbaus zur Gebäude- und Fassadentechnik. 170 ed. Verlag der Technischen Universität Graz, 20 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Durchbrüche in Tragstrukturen aus BSH und BSP

Dröscher, J., Augustin, M. & Schickhofer, G., 1 Sep 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Experimental and calculation methods on screw gluing for CLT members

Bratulic, K., 2016, Holzbau Forschung + Praxis. p. 81-90

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Experimental and calculation methods on screw gluing for CLT members

Bratulic, K., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Hygrothermische Langzeitmessung innerhalb einer BSP-Wand im Sockelbereich

Ganster, K., 13 Jun 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Mechanical propertiesof a composite lamellaand its utilization in structural elements

Sieder, R., Augustin, M. & Lierzer, T., 23 Aug 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Mechanical properties of a composite lamella built up with thin sideboards and its utilization to increase the material efficiency of structural elements

Sieder, R., Augustin, M. & Lierzer, T., 22 Aug 2016, Proceedings World Conference on Timber Engineering 2016. 9 p. GS1-02:2

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modularisierung der Holz-Massivbauweise in Brettsperrholz - Analyse und Fügung

Ganster, K., 1 Sep 2016, 2. Klagenfurter Holzbau-Fachtagung - Versorgen und Umhüllen im Holzbau. 36 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Reinforcement Concepts for Timber Beams with Large Round Holes

Dröscher, J., Augustin, M. & Schickhofer, G., 24 Aug 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Screw gluing - theoretical and experimental approach on screw pressure distribution and glue line strength

Bratulic, K. & Augustin, M., 2016, WCTE2016 Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Screw gluing - theoretical and experimental approach on screw pressure distribution and glue line strength

Bratulic, K. & Augustin, M., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Stabiltätsprobleme von BSP-Bauteilen

Thiel, A. & Bogensperger, T., 25 Nov 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Timber-Steel-Composite: A Possibility for Hybrid Structures of Long Span Timber Floors

Zimmer, S. & Augustin, M., 24 Aug 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Timber-Steel-Composite: A Possibility for Hybrid Structures of Long Span Timber Floors

Zimmer, S. & Augustin, M., Aug 2016, WCTE 2016 - World Conference on Timber Engineering - Proceedings. Technische Universität Wien

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Timber-Steel-Composite: A Possibility for Hybrid Structures of Long Span Timber Floors

Zimmer, S. & Augustin, M., Aug 2016.

Research output: Contribution to conferenceAbstractResearchpeer-review

ULS Design of CLT Elements – Basics and some Special Topics

Thiel, A. & Brandner, R., Mar 2016, Joint Conference of COST Actions FP1402 and FP1404 Cross Laminated Timber – a competitive wood product for visionary and fire safe buildings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

ULS Design of CLT Elements – Basics and some Special Topics

Thiel, A. & Brandner, R., 10 Mar 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Untersuchung und Nachweisführung auflagernah ausgeklinkter BSH|BSP-Plattenbalkenquerschnitte

Augustin, M. & Zimmer, S., 2016, 2. Klagenfurter Holzbau-Fachtagung: Versorgen und Umhüllen im Holzbau. Schickhofer, G. & Ringhofer, A. (eds.). Verlag der Technischen Universität Graz

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Untersuchung und Nachweisführung auflagernah ausgeklinkter BSH|BSP-Plattenbalkenquerschnitte

Augustin, M. & Zimmer, S., 1 Sep 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Versagensmechanismen bei axial beanspruchten Schraubengruppen in Abhängigkeit ihrer Anordnung

Mahlknecht, U., 1 Mar 2016, Doktorandenkolloquium Holzbau Forschungs + Praxis. p. 3 - 11

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Versagensmechanismen bei axial beanspruchten Schraubengruppen in Abhängigkeit ihrer Anordnung

Mahlknecht, U., 1 Mar 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Vibrational Behaviour of Cross Laminated Timber Floors in Residential Buildings

Zimmer, S. & Augustin, M., Aug 2016.

Research output: Contribution to conferenceAbstractResearchpeer-review

Vibrational Behaviour of Cross Laminated Timber Floors in Residential Buildings

Zimmer, S. & Augustin, M., Aug 2016, WCTE 2016 - World Conference on Timber Engineering - Proceedings. Technische Universität Wien

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Vibrational Behaviour of Cross Laminated Timber Floors in Residential Buildings

Zimmer, S. & Augustin, M., 25 Aug 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2015

Bemessungsdiagramme für den biegebeanspruchten Stab im Holzbau Teil 1

Moosbrugger, T., Krenn, H. & Bogensperger, T., 2015, In : Bautechnik. 92, 1, p. 18-27

Research output: Contribution to journalArticleResearchpeer-review

Bemessungsdiagramme für den biegebeanspruchten Stab im Holzbau Teil 2

Moosbrugger, T., Bogensperger, T. & Krenn, H., 2015, In : Bautechnik. 92, 4, p. 283-294

Research output: Contribution to journalArticleResearchpeer-review

Beulen von BSP-Scheiben − mechanische Analyse und Potenziale

Thiel, A., 23 Nov 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Concentrated load introduction in CLT elements perpendicular to plane

Bogensperger, T. & Jöbstl, R. A., 27 May 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Concentrated load introduction in CLT elements perpendicular to plane

Bogensperger, T. & Jöbstl, R. A., 2015, (Accepted/In press) INTERNATIONAL COUNCIL FOR RESEARCH AND INNOVATION IN BUILDING AND CONSTRUCTION WORKING COMMISSION W18 - TIMBER STRUCTURES CIB-W18. Karslruhe, Germany: .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File