Graz University of Technology (90000)

  • 8010

    Rechbauerstraße 12 Graz

    Austria

Research Output 1949 2020

Filter
Conference article
1995
Dialysis
Dialysis Solutions
Ultrafiltration
Blood
1996

Improved algorithm for the design of individually optimized dialysis profiles

Bachhiesl, P., Scharfetter, H., Kappel, F. & Hutten, H., 1 Dec 1996, In : Annual International Conference of the IEEE Engineering in Medicine and Biology Society - Proceedings. 5, p. 1806-1807 2 p.

Research output: Contribution to journalConference articleResearchpeer-review

Dialysis
Dialysis Solutions
Electrolytes
Dialysis
Dialysis Solutions
Blood
Sampling
Monitoring
1998

Inductively coupled wideband transceiver for bioimpedance spectroscopy (IBIS)

Hutten, H., Scharfetter, H., Ninaus, W., Puswald, B., Petrova, G. I. & Kovachev, D., 1 Dec 1998, In : Annual International Conference of the IEEE Engineering in Medicine and Biology Society - Proceedings. 4, p. 1791-1794 4 p.

Research output: Contribution to journalConference articleResearchpeer-review

Transceivers
Spectrum Analysis
Electrodes
Spectroscopy
Specifications
2001

Scatter diagram analysis of Cr segregation in Co-Cr based recording media

Grogger, W. & Krishnan, K. M., 1 Jul 2001, In : IEEE Transactions on Magnetics. 37, 4 I, p. 1465-1467 3 p.

Research output: Contribution to journalConference articleResearchpeer-review

recording
diagrams
Thin films
thin films
Transmission electron microscopy
2002

Fluid volume changes and LBNP response after simulated weightlessness with varied oral sodium supply

Hinghofer-Szalkay, H., Rössler, A., Scharfetter, H., Pilz, K. & László, Z., 1 Sep 2002, In : European Space Agency, (Special Publication) ESA SP. 501, p. 205-206 2 p.

Research output: Contribution to journalConference articleResearchpeer-review

Weightlessness
weightlessness
bed rest
volume change
Sodium
2003

Active settlement control with compensation grouting - Results from a case study

Kummerer, C., Schweiger, H. F. & Otterbein, R., 1 Jan 2003, In : Geotechnical Special Publication. 120 II, p. 813-823 11 p.

Research output: Contribution to journalConference articleResearchpeer-review

Grouting
grouting
case studies
subsidence
urban areas

Microstructural aspects of the ionic transport properties of strontium-substituted lanthanum cobaltites

Sitte, W., Bucher, E., Preis, W., Papst, I., Grogger, W. & Hofer, F., 25 Jul 2003, In : Materials Research Society Symposium Proceedings. 756, p. 527-532 6 p.

Research output: Contribution to journalConference articleResearchpeer-review

Lanthanum
Strontium
Ionic conductivity
lanthanum
strontium
2007

Magnetic induction tomography: Analysis of resolution and object shifting

Merwa, R. & Scharfetter, H., 1 Jan 2007, In : IFMBE Proceedings. 14, 1, p. 3968-3971 4 p.

Research output: Contribution to journalConference articleResearchpeer-review

Electromagnetic induction
Tomography
Image quality
Electric properties
Imaging techniques
2009

Assessment of Micro- and Mesomixing in Bubble Swarms via Simulations

Radl, S., Suzzi, D. & Khinast, J., 2009, In : Chemical Engineering Transactions. 17, p. 507-512

Research output: Contribution to journalConference articleResearch

2010

Luminescent chemosensors - Advanced tools in analytical chemistry

Borisov, S. & Klimant, I., 2010, In : Informacije MIDEM. 40, 4, p. 291-297

Research output: Contribution to journalConference articleResearchpeer-review

Optimierte Pumpspeicherkonzepte durch Umrichtertechnik

Schürhuber, R., 2010, In : e&i - Elektrotechnik und Informationstechnik. 127, 9, p. 257-259

Research output: Contribution to journalConference articleResearchpeer-review

2013

A New Approach for the Reduction of Aerodynamic Drag of Long-Distance Transportation Vehicles

Hirz, M. & Stadler, S., 2013, In : SAE International journal of commercial vehicles. 6, 2, p. 453-458

Research output: Contribution to journalConference articleResearchpeer-review

Hot deformation studies of a low carbon steel containing V

Poletti, M. C., Dikovits, M. & Ruete, J., 2013, In : Key engineering materials. 554-557, p. 1224-1231

Research output: Contribution to journalConference articleResearchpeer-review

2017

Carbon monoxide detection with CMOS integrated thin film SnO2 gas sensor

Lackner, E., Krainer, J., Wimmer-Teubenbacher, R., Sosada, F., Deluca, M., Gspan, C., Rohracher, K., Wachmann, E. & Köck, A., 2017, In : Materials Today / Proceedings . 4, 7, p. 7128-7131

Research output: Contribution to journalConference articleResearch

Hydrogen sulphide detection by CMOS integrated tungsten oxide nanowire networks

Krainer, J., Deluca, M., Lackner, E., Wimmer-Teubenbacher, R., Sosada, F., Gspan, C., Rohracher, K., Wachmann, E. & Köck, A., 2017, In : Materials Today / Proceedings . 4, p. 7132-7136

Research output: Contribution to journalConference articleResearch

Hydrogen Sulfide
Hydrogen sulfide
Nanowires
Tungsten
Oxides

Modular Fault Diagnosis System for Engine Test Bed Measurements

Wohlthan, M., Pirker, G. & Wimmer, A., 28 Mar 2017, In : SAE International journal of commercial vehicles. 10, 1, 11 p.

Research output: Contribution to journalConference articleResearchpeer-review

Real-world Comparison of Sensor Placement Algorithms for Leakage Localization

Fuchs-Hanusch, D. & Steffelbauer, D., 1 Jan 2017, In : Procedia Engineering. 186, p. 499-505 7 p.

Research output: Contribution to journalConference articleResearchpeer-review

Sensors
Hydrants
Graph theory
Pressure sensors
Flow rate

Tailoring recommendations for a multi-domain environment

Lacic, E., Kowald, D. & Lex, E., 1 Jan 2017, In : CEUR Workshop Proceedings. 1887, p. 42-45 4 p.

Research output: Contribution to journalConference articleResearchpeer-review

Recommender systems
Data structures
Concretes
2018

A formal TLS handshake model in LNT

Bozic, J., Marsso, L., Mateescu, R. & Wotawa, F., 23 Mar 2018, In : Electronic Proceedings in Theoretical Computer Science, EPTCS. 268, p. 1-40 40 p.

Research output: Contribution to journalConference articleResearchpeer-review

Testing
Specifications
Software engineering
Network protocols
Formal specification

A Generic and Modular Modeling Approach for Automotive Drivetrains Using a Coordinate Partitioning Method

Rumetshofer, J., Stolz, M., Bachinger, M. & Horn, M., 29 Oct 2018, In : MATEC Web of Conferences. 220, 02002.

Research output: Contribution to journalConference articleResearchpeer-review

Mechanical engineering
Gears
Automation

Analytics for everyday learning from two perspectives: Knowledge workers and teachers

Fessl, A., Kowald, D., Sola, S. L., Moreno, A., Maturana, R. A. & Thalmann, S., 1 Jan 2018, In : CEUR Workshop Proceedings. 2209

Research output: Contribution to journalConference articleResearchpeer-review

Recommender systems

A Scalable Queue for Work Distribution on GPUs

Kerbl, B., Müller, J., Kenzel, M., Schmalstieg, D. & Steinberger, M., 2018, In : ACM SIGPLAN Notices. 53, 1, p. 401-402

Research output: Contribution to journalConference articleResearchpeer-review

Closure Development for Multi-Scale Fluidized Bed Reactor Models: A CLR Case Study

Radl, S., Municchi, F., Cloete, S., Cloete, J. H., Andersson, S., Morgado, J. F., Gurker, T., Ferreira, R. Q., Kloss, C., Goniva, C. & Amini, S., 1 Jun 2018, In : Computer aided chemical engineering. 43, p. 247-252

Research output: Contribution to journalConference articleResearchpeer-review

Reforming reactions
Fluidized beds
Gases
Powders
Suspensions

CURRENT AND FUTURE INDUSTRIAL CHALLENGES: DEMOGRAPHIC CHANGE AND MEASURES FOR ELDERLY WORKERS IN INDUSTRY 4.0

Wolf, M., Kleindienst, M., Ramsauer, C., Zierler, C. & Winter, E., Feb 2018, In : Annals of Faculty Engineering Hunedoara – International Journal of Engineering . 16, 1, p. 67-76 10 p.

Research output: Contribution to journalConference articleResearchpeer-review

Dynamic Adaption to Permanent Memory Faults in Industrial Control Systems

Iber, J., Krisper, M., Dobaj, J. & Kreiner, C., 24 Apr 2018, In : Procedia Computer Science. 130, p. 392-399 8 p.

Research output: Contribution to journalConference articleResearchpeer-review

Control systems
Data storage equipment
Dynamic random access storage
Computer hardware
Service life

Evaluation of the Potential for Efficiency Increase by the Application of Model-Based Control Strategies in Large-Scale Solar Thermal Plants

Unterberger, V., Lichtenegger, K., Innerhofer, P., Gerardts, B. & Gölles, M., 15 Feb 2018, In : International Journal of Contemporary Energy. 4, 1, p. 1-8 8 p.

Research output: Contribution to journalConference articleResearchpeer-review

Fast Full Wave Simulation of Ultrasonic Pulse-Echo Testing by Iterative Coupling of Analytical and Numerical Methods

Albert, C., Bauer, P. & Von Der Linden, W., 13 Jun 2018, In : SAE Technical Papers. 2018-June, June

Research output: Contribution to journalConference articleResearchpeer-review

Materials testing
Steel structures
Computational efficiency
Transfer functions
Numerical models

Hydraulics and Operation Performance of TCDC-Extractors

Grafschafter, A., Rudelstorfer, G. & Siebenhofer, M., 1 Jun 2018, In : Chemie - Ingenieur - Technik. 90, 6, p. 864-871 8 p.

Research output: Contribution to journalConference articleResearchpeer-review

Isotope fractionation during Mg-carbonate mineral phase transformations

Harrison, A., Mavromatis, V., Oelkers, E. & Benezeth, P., 2018, In : Geophysical research abstracts. 20, p. EGU2018-10543

Research output: Contribution to journalConference articleResearchpeer-review

Layered Fields for Natural Tessellations on Surfaces

Zayer, R., Mlakar, D., Steinberger, M. & Seidel, H-P., 2018, In : ACM Transactions on Graphics. 37, 6, 15 p., 264.

Research output: Contribution to journalConference articleResearchpeer-review

Modeling of contact zones in air bending of sheet metals

Domitner, J., Eckhard, R., Schweinzer, D., Leumüller, H., Heller, B. & Sommitsch, C., 2018, In : Journal of Physics / Conference Series. 1063, p. 012141-1-6

Research output: Contribution to journalConference articleResearchpeer-review

Open Access

Numerical simulation and experimental validation of self-piercing riveting (SPR) of 6xxx aluminium alloys for automotive applications

Hönsch, F., Domitner, J., Sommitsch, C., Götzinger, B. & Kölz, M., 2018, In : Journal of Physics / Conference Series. 1063, p. 012081-1-6

Research output: Contribution to journalConference articleResearchpeer-review

Open Access

On the superiority of conflict-driven search in MUs enumeration

Koitz-Hristov, R. & Wotawa, F., 1 Jan 2018, In : CEUR Workshop Proceedings. 2289

Research output: Contribution to journalConference articleResearchpeer-review

Model checking
Set theory

Quality Metrics for Information Visualization

Behrisch, M., Blumenschein, M., Kim, N. W., Shao, L., El-Assady, M., Fuchs, J., Seebacher, D., Diehl, A., Brandes, U., Pfister, H., Schreck, T., Weiskopf, D. & Keim, D. A., 2018, In : Computer Graphics Forum. 37, 3, p. 625-662 38 p.

Research output: Contribution to journalConference articleResearchpeer-review

Reaktivdestillation zur Isolierung biobasierter Nebenprodukte aus Abwasserströmen

Painer, D., Lux, S. & Siebenhofer, M., 2018, In : Chemie - Ingenieur - Technik. 90, 9, p. 1149-1149

Research output: Contribution to journalConference articleResearchpeer-review

Reflections on the workshop

Fessl, A. & Thalmann, S., 1 Jan 2018, In : CEUR Workshop Proceedings. 2209

Research output: Contribution to journalConference articleResearchpeer-review

RESOURCE-PRODUCTIVE OPERATIONS – HOW LEAN, GREEN AND CONSTRAINT MANAGEMENT APPROACHES BLEND TOGETHER

Hammer, M., Karre, H. D. & Ramsauer, C., Feb 2018, In : Annals of Faculty Engineering Hunedoara – International Journal of Engineering . 16, 1, p. 87-92

Research output: Contribution to journalConference articleResearchpeer-review

Shading Atlas Streaming

Müller, J., Voglreiter, P., Dokter, M., Neff, T., Makar, M., Steinberger, M. & Schmalstieg, D., 2018, In : ACM Transactions on Graphics. 37, 6, 16 p., 199.

Research output: Contribution to journalConference articleResearchpeer-review

Simulation-based co-creation of algorithms

Dennerlein, S., Kowald, D., Pammer-Schindler, V., Lex, E. & Ley, T., 1 Jan 2018, In : CEUR Workshop Proceedings. 2190

Research output: Contribution to journalConference articleResearchpeer-review

Interactive computer systems
Software engineering
Systems analysis

Tuning Material Properties of ZnO Thin Films for Advanced Sensor Applications

Pilz, J., Perrotta, A. & Coclite, A. M., 3 Dec 2018, In : Proceedings MDPI.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access

Utilization of Biorefinery Side Products by Reactive Separation

Toth, A., Lux, S. & Siebenhofer, M., Sep 2018, In : Chemie - Ingenieur - Technik. 90, 9, p. 1172-1173

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
2019

A continuous dynamic recrystallization model to describe the hot deformation behaviour of a Ti5553 alloy

Buzolin, R. H., Krumphals, F., Lasnik, M., Krumphals, A. & Poletti, M. C., 14 Aug 2019, In : Journal of Physics: Conference Series. 1270, 1, 012048.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
microstructure
strain rate
grain boundaries
titanium alloys
recovery

Ammonia as Promising Fuel for Solid Oxide Fuel Cells: Experimental Analysis and Performance Evaluation

Stöckl, B., Preininger, M., Subotić, V., Schröttner, H., Sommersacher, P., Seidl, M., Megel, S. & Hochenauer, C., 1 Sep 2019, In : ECS Transactions. 91, 1, p. 1601-1610 10 p.

Research output: Contribution to journalConference articleResearchpeer-review

Best practice grid restoration with hydropower plants

Polster, S. C., Renner, H., Schürhuber, R., Schmaranz, R., Rupp, C., Tengg, C. & Ruppert, L., Sep 2019, In : Wasserwirtschaft. 109, Sonderh. 1, p. 107-112

Research output: Contribution to journalConference articleResearchpeer-review

turbine
power plant
experiment
evaluation
test

Continuous dynamic recrystallization during hot torsion of an aluminum alloy.

Poletti, M. C., Simonet-Fotso, T., Halici, D., Canelo-Yubero, D., Montheillet, F., Piot, D., Kovács, Z., Schell, N. & Tolnai, D., 14 Aug 2019, In : Journal of Physics: Conference Series. 1270, 1, 012049.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
aluminum alloys
torsion
misalignment
wrought alloys
microstructure

Deformation Behavior of High-Strength Steel Rivets for Self-Piercing Riveting Applications

Hönsch, F., Domitner, J. & Sommitsch, C., 2019, In : AIP Conference Proceedings. 2113, p. 050002-1-6

Research output: Contribution to journalConference articleResearchpeer-review

Open Access

Effect of the reuse of powder on material properties of Ti6Al4V processed by SLM

Meier, B., Skalon, M., Warchomicka, F. G., Belei Feliciano, C. A., Görtler, M., Kaindl, R. & Sommitsch, C., Jul 2019, In : AIP Conference Proceedings. 2113, 1, 150006.

Research output: Contribution to journalConference articleResearchpeer-review

reuse
titanium
powders
titanium alloys
tensile strength

Electrochemical Characterization and Performance Assessment of SOC Stacks in Electrolysis Mode

Preininger, M., Stöckl, B., Subotić, V., Schauperl, R. & Hochenauer, C., Jul 2019, In : ECS Transactions. 91, 1, p. 2589-2600 12 p.

Research output: Contribution to journalConference articleResearchpeer-review

Electrolysis
Steam
Inlet flow
Electrochemical impedance spectroscopy
Carbon monoxide

Evaluation of a momentum based impact model in frontal car collisions for the prospective assessment of ADAS

Smit, S., Tomasch, E., Kolk, H., Plank, M. A., Gugler, J. & Glaser, H., 4 Jan 2019, In : European Transport Research Review. 11, 1, 9 p., 2.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
Momentum
Railroad cars
Accidents
Active safety systems
evaluation