Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2020

Filter
Doctoral Thesis
2012

Frictional mortar contact for finite deformation problems with synthetic contact kinematics

Hammer, M., 2012

Research output: ThesisDoctoral ThesisResearch

Innovative Numerical Calculation of Transitional Flow with Turbomachinery Application

Collins, M. E., 2012

Research output: ThesisDoctoral ThesisResearch

Niedrigemissionskonzept für mittelschnelllaufende Lokomotivmotoren ohne Abgasnachbehandlung

Pemp, B., 2012

Research output: ThesisDoctoral ThesisResearch

Passenger Vehicles with In-Wheel Motors: Fundamentals, Potentials and Limitations

Rojas Rojas, A. E., 2012

Research output: ThesisDoctoral ThesisResearch

Potentiale eines PKW-Wasserstoffmotors mit kryogener Saugrohreinblasung

Leitner, D., 2012

Research output: ThesisDoctoral ThesisResearch

Strategic planning framework for ICT-based Information Service Systems

Vorraber, W., 2012

Research output: ThesisDoctoral ThesisResearch

Untersuchung von Wickelkopfschwingungen in Großgeneratoren

Schlegl, B., 2012

Research output: ThesisDoctoral ThesisResearch

2013

Experimental Investigation of Turning Mid Turbine Frame Designs

Santner, C., 2013

Research output: ThesisDoctoral ThesisResearch

Konstruktion, Aufbau und Betriebsführung eines zweiwelligen Turbinenprüfstandes

Hubinka, J., 2013

Research output: ThesisDoctoral ThesisResearch

On the Design and Validation of a Variable Geometry Burner Concept

Leitgeb, T., 2013

Research output: ThesisDoctoral ThesisResearch

Reputation als Risikofaktor in technologieorientierten Unternehmen. Status Quo – Reputationstreiber – Bewertungsmodell

Weißensteiner, C., 2013, 257 p.

Research output: ThesisDoctoral ThesisResearch

Thermische Auslegung von Werkzeugen für Presshärtprozesse

Weiß, W., 2013

Research output: ThesisDoctoral ThesisResearch

2014
Open Access
File

Experimental and numerical investigations of pin structures and pin reinforced dissimilar joints

Wittwer, L., 2014

Research output: ThesisDoctoral ThesisResearch

Damage analysis in a gamma TiAl alloy during hot working

Halici, D., 2015

Research output: ThesisDoctoral ThesisResearch

Simulation and experimental validation of adiabatic and non-adiabatic capillary tubes

Heimel, M., 2015

Research output: ThesisDoctoral ThesisResearch

Hot ductility investigations of continuously cast steels

Caliskanoglu, O., 2016

Research output: ThesisDoctoral ThesisResearch

2017

Analyse von Diesel-Gas Dual Fuel Brennverfahren für schnelllaufende Großmotoren

Kiesling, C., Mar 2017

Research output: ThesisDoctoral ThesisResearch

Thermodynamic Influence of the Lubrication Oil in Hermetic Reciprocating Compressors

Posch, S., 2017, 180 p.

Research output: ThesisDoctoral ThesisResearch

Untersuchung von Verbesserungspotentialen hermetischer Kolbenkompressoren mit Hilfe numerischer Methoden

Hopfgartner, J. W., 29 Nov 2017, (Submitted) 158 p.

Research output: ThesisDoctoral ThesisResearch

2018

3D-Druck von Natriumacetat-Trihydrat als Ergebnis eines konsequenten Entwicklungsprozesses

Brillinger, M., 31 Jul 2018, 134 p.

Research output: ThesisDoctoral ThesisResearch

File

Machine-Tool for Research in Synchronous Grinding

Steffan, M., 15 Jan 2018, 151 p.

Research output: ThesisDoctoral ThesisResearch

Discrete event simulation
System theory
Computational efficiency
Health care
Macros

Synchronizing Production Capacity with Market Demand Upswings in a Lean Production System

Pointner, A., 18 Jun 2018, Graz. 210 p.

Research output: ThesisDoctoral ThesisResearch

Wave Based Method for Structural Vibrations of Thick Plates

Klanner, M., 2018

Research output: ThesisDoctoral ThesisResearch

2019

Avoiding Lock-in in Technology Firms: A Competence-based Approach

Wipfler, H., 2019

Research output: ThesisDoctoral ThesisResearch

Steigerung der Energieeffizienz von Stückgutstetigförderern durch optimierte Antriebssystemauswahl

Stöhr, T., 2019, 203 p.

Research output: ThesisDoctoral ThesisResearch