Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

Filter
Article
2016

Auslegung und Simulation einer Kettenfahrwerkes: Analysis and Optimization of Crawler Track Unit

Haberer, C., Wolfschluckner, A. & Landschützer, C., Sep 2016, In : Konstruktion. p. 76 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Autonomes Fahren – Fiktion oder Realität?

Kepplinger, S., Hirz, M. & Eichberger, A., 10 Mar 2016, Die Digitale Tageszeitung, 121, p. 5 - 5

Research output: Contribution to specialist publicationArticleResearch

Autos, die sich selbst laden

Flechl, C., Schöggler, C., Fabian, J. & Fickert, L., 1 Jun 2016, Der Standard

Research output: Contribution to specialist publicationArticleResearch

Bending modulus of bidisperse rafts: Local and collective contributions

Petit, P., Biance, A-L., Lorenceau, E. & Planchette, C., 2016, In : Physical review / E. 93, p. 042802

Research output: Contribution to journalArticleResearchpeer-review

Biomimetics applied to factory layout planning: Fibonacci based patterns, spider webs and nautilus shell as bio-inspiration to reduce internal transport costs in factories

Tinello, D., Jodin, D. & Winkler, H., 23 Apr 2016, In : CIRP Journal of Manufacturing Science and Technology. Volume 13, May 2016, p. 51-71 20 p.

Research output: Contribution to journalArticleResearchpeer-review

Characterization and condensation behaviour of gravimetric tars produced during spruce torrefaction

Anca-Couce, A., Brunner, T., Kanzian, W., Obernberger, I. & Trattner, K., 2016, In : Journal of analytical and applied pyrolysis. 119, p. 173-179

Research output: Contribution to journalArticleResearchpeer-review

Combination of Microstructural Investigation and Simulation during the Heat Treatment of a Creep Resistant 11% Cr-Steel

Gsellmann, B., Halici, D., Albu, M., Beal, C. & Sonderegger, B., 2016, In : Materials Science Forum. Thermec 2016, 879, p. 625-630

Research output: Contribution to journalArticleResearchpeer-review

Comparative study of potential whiplash injuries for different occupants seated positions during rear end accidents

Omerovic, S., Tomasch, E., Gutsche, A. J. & Prebil, I., 2016, In : Acta of Bioengineering and Biomechanics.

Research output: Contribution to journalArticleResearchpeer-review

Comparison of Dilatometry Results Obtained by Two Different Devices when Generating CCT and In-Situ Diagrams

Moravec, J., Dikovits, M., Novakova, I. & Caliskanoglu, O., 2016, In : Key engineering materials. 669, p. 477-484

Research output: Contribution to journalArticleResearchpeer-review

Comparison of dolomite and lime as sorbents for in-situ H2S removal with respect to gasification parameters in biomass gasification

Husmann, S. M., Zuber, C., Maitz, V., Kienberger, T. & Hochenauer, C., 2016, In : Fuel. 181, p. 131-138 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Comparison of fail-operational software architectures from the viewpoint of an automotive application

Schnellbach, A., Hirz, M. & Fabian, J., Jun 2016, In : e&i - Elektrotechnik und Informationstechnik. 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Comparison of optimisation strategies for the determination of precise dummy head trajectories based on the fusion of electrical and optical measured data in frontal crash scenarios

Klein, E. C., Sinz, W., Moser, J., Greimel, R., Raguse, K., van Middendorff, C. & Steiner, C., 2016, In : Journal of Vehicle System Modelling and Testing. 11, 1, p. 23-47 25 p.

Research output: Contribution to journalArticleResearchpeer-review

Comparison of RANS and Embedded LES Calculations with Measurements of Transitional Flow Along a Flat Plate

Bader, P., Sanz, W., Steinmayr, C. & Leitl, P. A., Mar 2016, In : ERCOFTAC bulletin. 106

Research output: Contribution to journalArticleResearchpeer-review

Designing Information Systems to Facilitate Civil-Military Cooperation in Disaster Management

Vorraber, W., Lichtenegger, G. C., Brugger, J. B., Gojmerac, I., Egly, M., Panzenböck, K., Exner, E., Aschbacher, H., Christian, M. & Vössner, S., 2016, In : International journal of distributed systems and technologies. 7, 4, p. 22 40 p.

Research output: Contribution to journalArticleResearchpeer-review

Dissimilar Electron Beam Welds of Nickel Base Alloy A625 with a 9% Cr-Steel for High Temperature Applications

Wiednig, C. A., Plesiutschnig, E., Mitsche, S., Beal, C., Enzinger, N. & Lochbichler, C., 2 Nov 2016, In : Materials Science Forum. 879, p. 2100-2106

Research output: Contribution to journalArticleResearchpeer-review

Dominating High Temperature Corrosion Mechanisms in Low Alloy Steels in Wood Chips Fired Boilers

Gruber, T., Retschitzegger, S., Scharler, R. & Obernberger, I., 17 Mar 2016, In : Energy & fuels. 30, 3, p. 2385-2394 10 p.

Research output: Contribution to journalArticleResearchpeer-review

High strength steel
Boilers
Wood
Corrosion
Steel

Effects of Corroded and Non-Corroded Biodegradable Mg and Mg Alloys on Viability, Morphology and Differentiation of MC3T3-E1 Cells Elicited by Direct Cell/Material Interaction

Mostofi, S., Rad, E. B., Wiltsche, H., Fasching, U., Szakacs, G., Ramskogler, C., Srinivasaiah, S., Ueçal, M., Willumeit, R., Weinberg, A-M. & Schaefer, U., 2016, In : PLoS ONE.

Research output: Contribution to journalArticleResearchpeer-review

Electron beam welding of thick-walled copper components

Enzinger, N., Loidolt, P., Wiednig, C. A., Stütz, M. & Sommitsch, C., 13 Jul 2016, In : Science and technology of welding and joining. 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Elektrisch durch den Großraum Graz

Fabian, J. & Schmied, R., 2016, KEM-Newsletter

Research output: Contribution to specialist publicationArticleResearch

Elektronenstrahlschweißen einer artfremden Verbindung (A625/CB2) für Anwendungen im Kraftwerksbau

Wiednig, C. A., Enzinger, N. & Beal, C., 2016, In : Schweiss- & Prüftechnik. 01-02/2016, p. 8-13

Research output: Contribution to journalArticleResearch

Open Access
File

Elektronik hebt Physik nicht auf

Lex, C., 1 Jan 2016, Auto-Touring, p. 40-40

Research output: Contribution to specialist publicationArticleResearch

Open Access
File

Engineering for logistics

Landschützer, C. & Jodin, D., 10 Nov 2016, In : Proceedings in manufacturing systems . 11, 2, p. 63 70 p.

Research output: Contribution to journalArticleResearchpeer-review

Entwicklungsmethodik mit Berücksichtigung der Fertigungsaspekte für die Entwicklung von Baugruppen und Bauteilen in der Beschlägeindustrie.

Haas, F., Gerstgrasser, M., Netzer, E. & Küng, D., May 2016, In : Konstruktion. 05-2016, p. 84 - 87

Research output: Contribution to journalArticleResearch

Evaluating the trade-off between mechanical and electrochemical performance of separators for lithium-ion batteries: Methodology and application

Plaimer, M., Breitfuß, C., Sinz, W., Heindl, S. F., Ellersdorfer, C., Steffan, H., Wilkening, M., Hennige, V., Tatschl, R., Geier, A., Schramm, C. & Freunberger, S., 2016, In : Journal of power sources. Volume 306, p. 702-710

Research output: Contribution to journalArticleResearchpeer-review

Evaluation and optimization of the bonding behavior between substrate and coating processed by laser cladding

Vollmer, R. & Sommitsch, C., 2016, In : Physics procedia .

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Laser cladding
coatings
Coatings
optimization
evaluation

Evaluation of E-mobility benefits in Klagenfurt Air pollutant and GHG reduction

Uhrner, U., Reifeltshammer, R. J., Dippold, M., Hafner, W. & Sturm, P-J., 2016, In : Journal of Earth Sciences and Geotechnical Engineering. 6, 4, p. 401-414

Research output: Contribution to journalArticleResearchpeer-review

air quality
road
electric vehicle
diesel
electricity

Evaluation of the combustion noise of passenger car diesel engines

Seifriedsberger, J. & Rumplmayr, P., 29 Mar 2016, In : Automotive and Engine Technology. 1, 1-4, p. 1-10 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Passenger cars
Acoustic noise
Diesel engines
Combustion chambers
Acoustics

Evaluation of the impact of C2X systems to the accident severity in motorcycle accidents

Billicsich, S., Tomasch, E., Markovic, G., Eichberger, A. & Magosi, Z. F., 2016, In : Transportation Research Procedia. 14, p. 2129-2137

Research output: Contribution to journalArticleResearchpeer-review

Evaluation of Weldability of Titanium Alloy Ti-6Al-4V and Aluminum Alloy 6061 Produced by Electron Beam Welding

Havlik, P., Kouril, J., Foret, R., Dlouhy, I., Enzinger, N. & Wiednig, C. A., 2 Nov 2016, In : Materials Science Forum. 879, p. 714-719

Research output: Contribution to journalArticleResearchpeer-review

Evolution of the substructure of a novel 12% Cr steel under creep conditions

Yadav, S. D., Kalácska, S., Dománková, M., Yubero, D. C., Resel, R., Groma, I., Beal, C., Sonderegger, B., Sommitsch, C. & Poletti, M. C., 1 May 2016, In : Materials characterization. 115, p. 23-31 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Steel
substructures
Electron diffraction
Creep
steels

Experimental and numerical investigation of shrinkage and warpage of a u-shaped injection molded part

Kleindel, S., Eder, R., Schretter, H. & Hochenauer, C., 1 Mar 2016, In : International Polymer Processing. 31, 2016, p. 68-81

Research output: Contribution to journalArticleResearchpeer-review

Experimental and numerical investigations on the punching failure of carbon fiber-reinforced plastics

Szlosarek, R., Karall, T., Enzinger, N., Hahne, C., Meyer, N. & Berger, A., Jul 2016, In : MP Materials Testing. 58, 7-8, p. 617-621 5 p.

Research output: Contribution to journalArticleResearchpeer-review

Experimental and Simulative Friction Analysis of a Fired Passenger Car Diesel Engine with Focus on the Cranktrain

Wichtl, R., Schneider, M., Grabner, P. & Eichlseder, H., 17 Oct 2016, In : SAE international journal of engines. 9, 4, 2016-01-2348

Research output: Contribution to journalArticleResearchpeer-review

Experimental and simulative investigation of flame–wall interactions and quenching in spark-ignition engines

Suckart, D., Linse, D., Schutting, E. & Eichlseder, H., 22 Dec 2016, In : Automotive and Engine Technology.

Research output: Contribution to journalArticleResearchpeer-review

Experimental investigation and numerical simulation of resistance spot welding for residual stress evaluation of DP1000 steel

Pakkanen, J., Vallant, R. & Kicin, M., 2016, In : Welding in the world. 60, February;2, p. 1-10

Research output: Contribution to journalArticleResearchpeer-review

Experimental Optimization of a Small Bore Natural Gas-Diesel Dual Fuel Engine with Direct Fuel Injection

Fasching, P., Sprenger, F. & Eichlseder, H., 5 Apr 2016, In : SAE international journal of engines. 9, 2, 15 p., 2016-01-0783

Research output: Contribution to journalArticleResearchpeer-review

Extended lubrication theory for generalized Couette flow through converging gaps

Baric, E. & Steiner, H., 2016, In : International journal of heat and mass transfer. 99, p. 149-158

Research output: Contribution to journalArticleResearchpeer-review

Faster Cancer Treatment: Using timestamp data to improve patient journeys

Walker, C., O'Sullivan, M., Ziedins, I. & Furian, N., 2016, In : Healthcare. p. 1-7

Research output: Contribution to journalArticleResearchpeer-review

Fatigue life assessment of friction spot welded 7050-T76 aluminium alloy using Weibull distribution

Effertz, P., 17 Feb 2016, In : International Journal of Fatigue. 87, p. 381–390

Research output: Contribution to journalArticleResearchpeer-review

Ferritic phase transformation to improve creep properties of martensitic high Cr steels

Plesiutschnig, E., Beal, C., Sommitsch, C., Paul, S. & Zeiler, G., 2016, In : Scripta materialia. 122, p. 98-101

Research output: Contribution to journalArticleResearchpeer-review

creep properties
Steel
austenite
Austenite
phase transformations

Flexible Parameterization Strategies in Automotive 3D Vehicle Layout

Rossbacher, P. & Hirz, M., 2016, In : Computer-aided design and applications.

Research output: Contribution to journalArticleResearchpeer-review

Fracture analysis of a low pressure steam turbine blade

Plesiutschnig, E., Fritzl, P. J., Enzinger, N. & Sommitsch, C., 2016, In : Case Studies in Engineering Failure Analysis. 5-6, p. 39-50 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Steam turbines
Turbomachine blades
Crack propagation
Natural frequencies
Corrosion

Fracture angle search with Puck's 3D interfiber fracture criterion

Szlosarek, R., Karall, T., Hahne, C., Berger, A. & Enzinger, N., 2016, In : Composites: Mechanics, Computations, Applications. 7, 4, p. 319-339

Research output: Contribution to journalArticleResearchpeer-review

Generative Engineering Design methodology used for the development of surface-based components

Gavacova, J., Gulan, L., Forrai, M. & Hirz, M., 2016, In : Computer-aided design and applications.

Research output: Contribution to journalArticleResearchpeer-review

GE's J920 FleXtra Gas Engine for 60 Hz Applications

Birgel, A., Köberl, S., Trapp, C. & Wimmer, A., 9 Mar 2016, In : MTZ industrial. 6, 1, p. 14-21

Research output: Contribution to journalArticleResearch

Heat pump condenser and desuperheater integrated into a storage tank: Model development and comparison with measurements

Heinz, A., Lerch, W. & Heimrath, R., 2016, In : Applied Thermal Engineering. 102, p. 465 - 475

Research output: Contribution to journalArticleResearchpeer-review

Holistic assessment of a landfill mining pilot project in Austria: Methodology and application

Hermann, R., Baumgartner, R., Vorbach, S., Wolfsberger, T., Ragossnig, A. & Pomberger, R., 2016, In : Waste management. p. 646-657 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Identification of representative operating conditions of HVAC systems in passenger rail vehicles based on sampling virtual train trips

Luger, C., Kallinovsky, J. & Rieberer, R., 2016, In : Advanced Engineering Informatics. 30, 11 p.

Research output: Contribution to journalArticleResearchpeer-review

IEA SHC Task 42 / ECES Annex 29 WG A1: Engineering and processing of PCMs, TCMs and sorption materials

Ristic, A., Furbo, S., Moser, C., Schranzhofer, H., Lazaro, A., Delgado, M., Penalosa, C., Zalewski, L., Diarce, G., Alkan, C., Gunasekara, S., Haussmann, T., Gschwander, S., Rathgeber, C., Schmit, H., Barreneche, C., Cabeza, L., Ferrer, G., Konuklu, Y., Paksoy, H. & 5 othersRammelberg, H., Munz, G., Herzog, T., Jänchen, J. & Palomo del Barrio, E., 2016, In : Energy Procedia. 91, p. 207-217

Research output: Contribution to journalArticleResearchpeer-review

Open Access