Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

Filter
Article
2017

Fuel Preparation and Combustion in Rocket and Jet Engines

Brenn, G., Kozlov, A. A., Borovik, I. N. & Strokach, E. A., 2017, In : Russian Engineering Research. 37, 10, p. 857-862

Research output: Contribution to journalArticleResearchpeer-review

Future trends in CAD – from the perspective of automotive industry

Hirz, M., Rossbacher, P. & Gulanova, J., 7 Jul 2017, In : Computer-aided design and applications.

Research output: Contribution to journalArticleResearchpeer-review

Generative engineering design methodology used for the development of surface-based components

Gulanova, J., Gulan, L., Forrai, M. & Hirz, M., 2017, In : Computer-aided design and applications.

Research output: Contribution to journalArticleResearchpeer-review

GE’s J920 Gas Engine — 10.4 MW Power and more than 50 % Electrical Efficiency

Birgel, A., Böwing, R., Trapp, C. & Wimmer, A., 1 Sep 2017, In : MTZ industrial. 7, 2, p. 40-47

Research output: Contribution to journalArticleResearch

Grazer Autorenteam ausgezeichnet: Outstanding Paper Award FISITA 2016

Pessl, B., Leitner, M. & Fabian, J., 2017, ÖIAN- das Kommunikationsmagazin des Österreichischen Ingenieur- und Architekten-Vereins.

Research output: Contribution to specialist publicationArticleResearch

Hohe solare Deckungsgrade durch thermisch aktivierte Bauteile

Ramschak, T., Fink, C., Heimrath, R., Lerch, W. & Mach, T., 2017, In : Nachhaltige Technologien - erneuerbare Energien und Ressourceneffizienz. 04/2017, p. 24-26

Research output: Contribution to journalArticleResearch

Impact of cyclic lean-rich aging unter DeSOx condition on the lean-gas light-off and hydrogen formation ability of a lean NOx trap (LNT)

Maurer, M., Fortner, T., Holler, P., Zarl, S. & Eichlseder, H., 7 Jul 2017, In : Automotive and Engine Technology. 15 p.

Research output: Contribution to journalArticleResearchpeer-review

Improved Modeling of Near-Wall Heat Transport for Cooling of Electric and Hybrid Powertrain Components by High Prandtl Number Flow

Saric, S., Ennemoser, A., Basara, B., Petutschnig, H., Irrenfried, C., Steiner, H. & Brenn, G., 2017, In : SAE international journal of engines. 10, 3, p. 778-784

Research output: Contribution to journalArticleResearchpeer-review

Improving the behavioral realism of global integrated assessment models: An application to consumers’ vehicle choices

McCollum, D. L., Wilson, C., Pettifor, H., Ramea, K., Krey, V., Riahi, K., Bertram, C., Lin, Z., Edelenbosch, O. Y. & Fujisawa, S., 1 Aug 2017, In : Transportation Research / D. 55, p. 322-342 21 p.

Research output: Contribution to journalArticleResearchpeer-review

realism
energy
purchase
Consumer behavior
consumption behavior

Influence of backward-and forward-facing steps on the flow through a turning mid turbine frame

Bauinger, S., Goettlich, E., Heitmeir, F. & Malzacher, F., 1 Dec 2017, In : Journal of Turbomachinery. 139, 12, 121005.

Research output: Contribution to journalArticleResearchpeer-review

Turbines
Rotors
Ducts
Engines
3D printers

Influence of heterogeneous secondary reactions during slow pyrolysis on char oxidation reactivity of woody biomass

Anca-Couce, A., Dieguez-Alonso, A., Zobel, N., Berger, A., Kienzl, N. & Behrendt, F., 2017, In : Energy & fuels.

Research output: Contribution to journalArticleResearchpeer-review

Influence of Ti on the toughness of the FGHAZ and the CGHAZ of high-strength microalloyed S700MC steels

Spachinger, S. J., Ernst, W. & Enzinger, N., 30 May 2017, In : Welding in the world. 61, 6, p. 1117-1131

Research output: Contribution to journalArticleResearchpeer-review

Influences of system uncertainties on the numerical transfer path analysis of engine systems

Acri, A., Nijman, E., Acri, A. & Offner, G., 24 Mar 2017, In : Mechanical Systems and Signal Processing. 95, p. 106-121

Research output: Contribution to journalArticleResearchpeer-review

Innovative surface modification of Ti6Al4V alloy by electron beam technique for biomedical application

Ramskogler, C., Warchomicka, F. G., Mostofi, S., Weinberg, A. & Sommitsch, C., 11 Apr 2017, In : Materials science and engineering / C. 78, p. 105 - 113

Research output: Contribution to journalArticleResearchpeer-review

In-operando Detection of Carbon Depositions and Carbon Formation Predictions for Industrial-Sized SOFCs Fueled with Synthetic Diesel Reformate

Subotić, V., Schluckner, C., Stöckl, B., Reichholf, D., Lawlor, V., Pofahl, S., Schröttner, H. & Hochenauer, C., 2017, In : ECS transactions. 78, 1, p. 2451-2460 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Investigation of creep cavities in a novel 12Cr0.36Ta steel employing three-dimensional electron backscatter diffraction technique

Yadav, S. D., Jäntsch, U., Scherer, T., Ahmadi, M. R., Rosc, J. & Poletti, C., 15 Nov 2017, In : Materials Letters. 207, p. 76-79 4 p.

Research output: Contribution to journalArticleResearchpeer-review

Steel
Electron diffraction
Creep
steels
cavities

Macrodamage Accumulation Model for a Human Femur

Hamandi, F. & Goswami, T., 2017, In : Applied Bionics and Biomechanics. 2017, 4539178.

Research output: Contribution to journalArticleResearchpeer-review

Femur
Bone
Bone and Bones
Growth
Bone Fractures

Methodology to Facilitate Successful Lean Implementation

Berlec, T., Kleindienst, M., Rabitsch, C. & Ramsauer, C., 16 Jun 2017, In : Strojniski vestnik - Journal of mechanical engineering.

Research output: Contribution to journalArticleResearchpeer-review

Mobile Flywheel Energy Storage Systems: Determining Rolling Element Bearing Loads to Expand Possibilities

Buchroithner, A., Brandstatter, A. & Recheis, M., 1 Sep 2017, In : IEEE Vehicular Technology Magazine. 12, 3, p. 83-94 12 p., 7993067.

Research output: Contribution to journalArticleResearchpeer-review

Bearings (structural)
Flywheels
Energy storage
Life cycle
Vacuum

Modeling of precipitation strengthening in Inconel 718 including non-spherical gamma '' precipitates

Ahmadi, M. R., Rath, M., Povoden-Karadeniz, E., Primig, S., Wojcik, T., Danninger, A., Stockinger, M. & Kozeschnik, E., Jul 2017, In : Modelling and simulation in materials science and engineering. 25, 5, 16 p., 055005.

Research output: Contribution to journalArticleResearchpeer-review

Inconel (trademark)
Strengthening
Precipitates
precipitates
Strengthening (metal)

Modeling of precipitation strengthening in Inconel 718 including non-spherical γ'' precipitates

Ahmadi, M. R., Rath, M., Povoden-Karadeniz, E., Primig, S., Wojcik, T., Danninger, A., Stockinger, M. & kozeschnik, E., Jul 2017, In : Modelling and simulation in materials science and engineering. p. 1-16 16 p., 055005 .

Research output: Contribution to journalArticleResearchpeer-review

Inconel (trademark)
Strengthening
Precipitates
precipitates
Strengthening (metal)

Modelling heat of reaction in biomass pyrolysis with detailed reaction schemes

Anca-Couce, A. & Scharler, R., 2017, In : Fuel. 206, p. 572-579

Research output: Contribution to journalArticleResearchpeer-review

Modelling the flash formation of linear friction welded 30CrNiMo8 high strength steel chains

Effertz, P., Fuchs, F. & Enzinger, N., 3 Apr 2017, In : The international journal of advanced manufacturing technology.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
Friction welding
High strength steel
Friction
Flash welding
Butt welding

Modulare Planung urbaner Energieversorgungskonzepte

Mach, T., Fink, C., Heimrath, R., Leusbrock, I. & Fluch, J., 2017, In : Nachhaltige Technologien - erneuerbare Energien und Ressourceneffizienz. 01/2017, p. 12 - 14

Research output: Contribution to journalArticleResearch

Multiscale simulations and experiments on water jet atomization

Saeedipour, M., Schneiderbauer, S., Plohl, G., Brenn, G. & Pirker, S., 2017, In : International journal of multiphase flow. 95, p. 71-83

Research output: Contribution to journalArticleResearchpeer-review

Novel validated method for GIS based automated dynamic urban building energy simulations

Nageler, P., Zahrer, G., Heimrath, R., Mach, T., Mauthner, F., Leusbrock, I., Schranzhofer, H. & Hochenauer, C., 24 Jul 2017, In : Energy (Oxford). 139, p. 142-154

Research output: Contribution to journalArticleResearchpeer-review

Numerical analysis of a hermetic reciprocating compressor oil pump system

Posch, S., Hopfgartner, J. W., Berger, E., Zuber, B., Schöllauf, P. & Almbauer, R., 5 Oct 2017, In : International journal of refrigeration. 85, p. 135-143 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Numerical Analysis of the Thermal Behavior of a Hermetic Reciprocating Compressor

Posch, S., Hopfgartner, J. W., Berger, E., Zuber, B., Dür, L. A., Almbauer, R. & Stangl, S., 2017, In : Journal of Earth Science and Engineering. 7, p. 1-9

Research output: Contribution to journalArticleResearchpeer-review

On the Derivation of Boundary Conditions for Continuum Dislocation Dynamics

Hochrainer, T., 30 Jul 2017, In : Crystals. 7, 235, p. 1-12 12 p., Crystals 2017, 7, 235.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
derivation
Boundary conditions
Thermodynamics
boundary conditions
continuums

On the influence of a five-hole-probe on the vibration characteristics of a low pressure turbine rotor while performing aerodynamic measurements

Schönleitner, F., Selic, T., Zenz, M., Heitmeir, F. & Marn, A., 2017, In : Technische Mechanik. 37, 2-5, p. 196-207 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Aerodynamics
Turbines
Rotors
Channel flow
Acoustics

On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels

Steineder, K., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 29 Jul 2017, In : Acta materialia. 139 (2017), p. 39 - 50 139 (2017).

Research output: Contribution to journalArticleResearchpeer-review

On the problem of ventilation control in case of a tunnel fire event

Sturm, P-J., Beyer, M. & Rafiei, M., 2017, In : Case Studies in Fire Safety . 7, p. 36-43

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Ventilation
Tunnels
Fires
event
air

On Turbulence Measurements and Analyses in a Two-Stage Two-Spool Turbine Rig

Bauinger, S., Behre, S., Lengani, D., Guendogdu, Y., Heitmeir, F. & Göttlich, E., Jul 2017, In : Journal of Turbomachinery. 139, 7, p. 071008-1-071008-11 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Optimierung der Schleifbearbeitung mittels OPC UA: Neue Prozessregelung zur Vermeidung von thermischer Randzonenschädigung

Steffan, M., Haas, F., Zopf, P. & Edler, J., 1 Mar 2017, In : Zeitschrift für wirtschaftlichen Fabrikbetrieb. 112, 3/2017, p. 137 140 p.

Research output: Contribution to journalArticleResearchpeer-review

Optimized Process for Steel-Aluminium Welding

Götzinger, B., Karner, W., Hartmann, M. & Silvayeh, Z., 2017, In : Lightweight Design Worldwide. Vol. 10, No. 2, p. 42-46

Research output: Contribution to journalArticleResearchpeer-review

Parameterisation of a Maxwell model for transient tyre force by means of an extended firefly algorithm

Hackl, A., Hirschberg, W., Lex, C. & Magele, C., 10 Jan 2017, In : Advances in Mechanical Engineering. Vol. 9(1), 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Performance characterization of a solid oxide cell stack with chromium-based interconnects (CFY)

Preininger, M., Wurm, J., Subotić, V., Schauperl, R. & Hochenauer, C., 30 Nov 2017, In : International Journal of Hydrogen Energy. 42, 48, p. 28653-28664 12 p.

Research output: Contribution to journalArticleResearchpeer-review

electrolysis
Electrolysis
chromium
Chromium
Oxides

Porosity and density measurements of sodium acetate trihydrate for thermal energy storage

Dannemand, M., Delgado, M., Lazaro, A., Penalosa, C., Gundlach, C., Trinderup, C., Berg Johansen, J., Moser, C., Schranzhofer, H. & Furbo, S., 11 Dec 2017, In : Applied Thermal Engineering. p. 707 - 714 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Prediction of the fluid flow, heat transfer and inactivation of microorganism at medical devices in modern steam sterilizers using computational fluid dynamics

Feurhuber, M., Cattide, A., Magno, M., Miranda, M., Prieler, R. J. & Hochenauer, C., 2017, In : Applied Thermal Engineering. 127, p. 1391-1403 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Procurement in the future: Where will procurement be in 2035?

Stek, K., 21 Dec 2017, In : In-Procurement .

Research output: Contribution to journalArticleResearch

File

Produktgestaltung als Stellhebel in der agilen Produktion: Ausarbeitung und Anwendung der Design-for-Agility Methode in der Automobilindustrie

Pointner, A., Böhnke, N-C. & Ramsauer, C., 2017, In : Industrie 4.0 Management. 6/2017

Research output: Contribution to journalArticleResearchpeer-review

Pyrolysis of pellets made with biomass and glycerol: Kinetic analysis and evolved gas analysis

Bartocci, P., Anca-Couce, A., Slopiecka, K., Nefkens, S., Evic, N., Retschitzegger, S., Barbanera, M., Buratti, C., Cotana, F., Bidini, G. & Fantozzi, F., 2017, In : Biomass & bioenergy. 97, p. 11-19

Research output: Contribution to journalArticleResearchpeer-review

Removing H2S from Biogas Using Sorbents for Solid Oxide Fuel Cell Applications

Weinländer, C., Neubauer, R., Hauth, M. & Hochenauer, C., 7 Jun 2017, In : Chemie-Ingenieur-Technik.

Research output: Contribution to journalArticleResearchpeer-review

Self-emulsification of Lipidic Drug Delivery System in Pure Water and in Concentrated Glycerol Solution

Planchette, C., Mercuri, A., Arcangeli, L., Kriechbaum, M. & Laggner, P., 2017, In : AAPS PharmSciTech . 18, 8, p. 3053-3063

Research output: Contribution to journalArticleResearchpeer-review

Simulation Models for Material Handling Equipment Design: Evaluation Criteria, Methods and Application

Stöhr, T. & Landschützer, C., 9 Nov 2017, In : Proceedings in manufacturing systems . 12, 1, p. 65-71 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Smoke propagation in the region of cross-passages in long railway tunnels – Results from full scale tests

Sturm, P-J., Thaller, T. & Rodler, J., 28 Nov 2017, In : Geomechanics and Tunnelling = Geomechanik und Tunnelbau. Volume 10, Issue 6, p. 694-699

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Social Entrepreneurship: ein Ordnungsversuch

Vorbach, S., 2017, In : WING-Business. 2/2017, p. 11-13 3 p.

Research output: Contribution to journalArticleResearchpeer-review