Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2020

Filter
Article
2019

Experimental investigation on biomass shrinking and swelling behaviour: Particles pyrolysis and wood logs combustion

Caposciutti, G., Almuina-Villar, H., Dieguez-Alonso, A., Gruber, T., Kelz, J., Desideri, U., Hochenauer, C., Scharler, R. & Anca-Couce, A., 2019, In : Biomass & Bioenergy. 123, April 2019, p. 1-13 13 p.

Research output: Contribution to journalArticleResearchpeer-review

wood logs
pyrolysis
combustion
swelling
Swelling

Experimental validation of analytical models for liquid film breakup on rotating substrates

Line, H., Steiner, H. & Brenn, G., 20 Jul 2019, In : Chemical Engineering Science. 202, p. 118-129 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Drop breakup
Experimental Validation
Breakup
Liquid films
Analytical Model

Extensive analysis of an SOC stack for mobile application in reversible mode under various operating conditions

Preininger, M., Stöckl, B., Subotić, V. & Hochenauer, C., 10 Mar 2019, In : Electrochimica acta. 299, p. 692-707 16 p.

Research output: Contribution to journalArticleResearchpeer-review

Oxides
Electrolysis
Fuel cells
Degradation
Gas fuel analysis

Filler Effect in Shotcrete

Galan, I., Briendl, L., Thumann, M., Steindl, F., Röck, R., Kusterle, W. & Mittermayr, F., 1 Oct 2019, In : Materials. 12, 19, 24 p., 3221.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Calcium Carbonate
Limestone
Fillers
Hydration
Particle accelerators

Gas Metal Arc Root Welding of Pearlitic Rails Using Magnetic Arc Deflection

Weingrill, L. A., Schwald, M., Faustmann, C., Frühstück, D. & Enzinger, N., Jan 2019, In : MATEC Web of Conferences. 269, 8 p., 02001.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Generation Tool for Automated Thermal City Modelling

Nageler, P. J., Mach, T., Heimrath, R., Schranzhofer, H. & Hochenauer, C., 25 Jan 2019, In : Applied Mechanics and Materials . 887, p. 292 - 299 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Heating
Program processors
Automation
Geometry
Hot Temperature

Gruendungsgarage: A best-practice example of an academic start-up accelerator

Glinik, M., Jan 2019, (Accepted/In press) In : International Journal of Engineering Pedagogy.

Research output: Contribution to journalArticleResearchpeer-review

best practice
entrepreneurship
university
expert
university teaching

Hohe solare Deckungsgrade durch thermisch aktivierte Bauteile

Ramschak, T., Fink, C., Heimrath, R., Lerch, W. & Mach, T., Jan 2019, TGA-Planung , p. 174-177.

Research output: Contribution to specialist publicationArticleResearch

Hot smoke tests for smoke propagation investigations in long rail tunnels

Sturm, P-J., Rodler, J., Thaller, T., Fruhwirt, D. & Fößleitner, P., 1 Apr 2019, In : Fire Safety Journal. 105, April 2019, p. 196-203 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
smoke
rails
Smoke
Rails
tunnels

Improving the integrity and the microstructural features of electron beam welds of a creep-resistant martensitic steel by local (de-)alloying

Rabl, A., Pixner, F., Duarte, B., Blatesic, D., Beal, C. & Enzinger, N., 8 Mar 2019, In : Welding in the world. 63, 2, p. 575-582 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Martensitic steel
Steel
Alloying
Electron beams
Creep

Influence of the focus wobbling technique on the integrity and the properties of electron beam welded MarBN steel

Rabl, A., Pixner, F., Blatesic, D., Béal, C. & Enzinger, N., 6 Jan 2019, In : Welding in the world. 63, 3, p. 715-724

Research output: Contribution to journalArticleResearchpeer-review

Influence of the Quenching and Partitioning Process on the Transformation Kinetics and Hardness in a Lean Medium Manganese TRIP Steel

Kaar, S., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., Mar 2019, In : Metals. 9, 3, 353.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Steel
Manganese
Plasticity
Quenching
Hardness

In-situ synchrotron X-ray diffraction of Ti-6Al-4V during thermomechanical treatment in the beta field

Warchomicka, F., Canelo-Yubero, D., Zehetner, E., Requena, G., Stark, A. & Poletti, C., 1 Aug 2019, In : Metals. 9, 8, 14 p., 862.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Thermomechanical treatment
Synchrotrons
Restoration
X ray diffraction
Strain rate

Introduction of a Partially Digitalized Communication Concept for Industrial Customer Service

Oblak, D. & Weller, S., Apr 2019, ESTIEM Magazine, ISSN 0874-5242, Eindhoven, NL, 56, 2019/1.

Research output: Contribution to specialist publicationArticleResearchpeer-review

Layered Structures of Ti-6Al-4V Alloy and Metal Matrix Composites on Its Base Joint by Diffusion Bonding and Friction Welding

Prikhodko, S. V., Savvakin, D. G., Markovsky, P. E., Stasiuk, O. O., Enzinger, N., Deley, F., Flipo, B., Shirzadi, A., Davies, H. M., Davies, P. D., Penny, J., Bozhilov, K. & Ivasishin, O. M., 2019, In : Microscopy and microanalysis. 25, S2, p. 812-813

Research output: Contribution to journalArticleResearchpeer-review

Open Access

MATERIAL HANDLING MACHINES AND SYSTEMS – UMI-TWINN PROJECT CONTRIBUTION

Telek, P., Illés, B., Landschützer, C., Schenk, F. & Massi, F., 25 Apr 2019, In : Advanced Logistic Systems. 2018, 01, p. 7-20 14 p.

Research output: Contribution to journalArticleResearchpeer-review

Material model of pulp fibres

Seidlhofer, T., Hirn, U. & Ulz, M. H., 2019, In : Proceedings in Applied Mathematics and Mechanics . 2 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Pulp
Fibers
Constitutive equations
Plastics
Industry

Methods for the measurement of ferrite content in multipass duplex stainless steel welds

Putz, A., Althuber, M., Zelić, A., Westin, E. M., Willidal, T. & Enzinger, N., 1 Jun 2019, In : Welding in the world. 63, 4, p. 1075-1086 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Stainless Steel
Image analysis
Ferrite
Welds
Stainless steel

Microstructure development of molybdenum during rotary friction welding

Stütz, M., Buzolin, R. H., Pixner, F., Poletti, M. C. & Enzinger, N., 2019, In : Materials characterization. 151, p. 506-518 13 p.

Research output: Contribution to journalArticleResearchpeer-review

friction welding
Friction welding
Molybdenum
molybdenum
Welding

Modelling convective heat transfer to non-spherical particles

Gerhardter, H., Prieler, R. J., Schluckner, C., Knoll, M., Hochenauer, C., Mühlböck, M., Tomazic, P. & Schröttner, H., 1 Feb 2019, In : Powder Technology. 343, p. 245-254 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Modelling of thermal wall boundary conditions with temperature-dependent material properties for use in RANS

Steiner, H. & Irrenfried, C., 8 Nov 2019, In : International journal of heat and fluid flow. 80, 10 p., 108495.

Research output: Contribution to journalArticleResearchpeer-review

Materials properties
Prandtl number
Direct numerical simulation
Boundary conditions
boundary conditions

Necking-induced fracture prediction using an artificial neural network trained on virtual test data

Greve, L., Schneider, B., Eller, T., Andres, M., Martinez, J-D. & van de Weg, B., 1 Oct 2019, In : Engineering fracture mechanics. 2019, 106642.

Research output: Contribution to journalArticleResearchpeer-review

Neue Augmented-Reality-Lösung reduziert Stillstandszeit im Störfall

Viehberger, J., Vorraber, W., Eisele, P. S. & Haas, F., Jun 2019, In : VDI-Z integrierte Produktion. 2019, 6, p. 20-22 3 p.

Research output: Contribution to journalArticleResearch

Non-destructive microstructural analysis by electrical conductivity: Comparison with hardness measurements in different materials

Sorger, G. L., Oliveira, J. P., Inácio, P. L., Enzinger, N., Vilaça, P., Miranda, R. M. & Santos, T. G., 1 Mar 2019, In : Journal of Materials Science and Technology. 35, 3, p. 360-368 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Hardness
Eddy currents
Eddy current testing
Tungsten
Steel

Numerical analysis of flow configurations and electrical contact positions in SOFC single cells and their impact on local effects

Schluckner, C., Subotić, V., Preißl, S. & Hochenauer, C., 15 Jan 2019, In : International Journal of Hydrogen Energy. 44, 3, p. 1877-1895 19 p.

Research output: Contribution to journalArticleResearchpeer-review

Solid oxide fuel cells (SOFC)
numerical analysis
Numerical analysis
electric contacts
Current density

Performance of a ten-layer reversible Solid Oxide Cell stack (rSOC) under transient operation for autonomous application

Preininger, M., Stöckl, B., Subotić, V., Mittmann, F. & Hochenauer, C., 2 Aug 2019, In : Applied Energy. 254, 15 p., 113695.

Research output: Contribution to journalArticleResearchpeer-review

oxide
Oxides
Current density
Electrolysis
density current

Platform for Monitoring and Comparing Machining Processes in Terms of Energy Efficiency

Haas, F., Suarez Gonzalez, A., Cus, F. & Zuperl, U., 22 Jul 2019, In : Transactions of FAMENA. 43, 2, p. 31 - 47 17 p.

Research output: Contribution to journalArticleResearchpeer-review

energy efficiency
Energy efficiency
Machining
Energy utilization
Monitoring

Powerful analytical solution to heat flow problem in welding

Nasiri, M. B. & Enzinger, N., 1 Jan 2019, In : International Journal of Thermal Sciences . 135, p. 601-612 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Welding
Heat transfer
Finite element method
Welds
Temperature distribution

Prediction of the anisotropic mechanical properties of compacted powders

Loidolt, P., Ulz, M. H. & Khinast, J., 2019, In : Powder Technology. 345, p. 589-600 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Powders
Compaction
Mechanical properties
Anisotropy
Boundary conditions

Preparation Method of Spherical and Monocrystalline Aluminum Powder

Skalon, M., Hebda, M., Buzolin, R., Pottlacher, G., Mitsche, S. & Sommitsch, C., 23 Mar 2019, In : Metals. 9, 3, 9 p., 375.

Research output: Contribution to journalArticleResearchpeer-review

Purchasing and supply management (PSM) competencies: Current and future requirements

Bals, L., Schulze, H., Kelly, S. & Stek, K., 2019, In : Journal of Purchasing and Supply Management. 25, 5, 15 p.

Research output: Contribution to journalArticleResearchpeer-review

Pyrogenic carbon capture and storage

Schmidt, H. P., Anca-Couce, A., Hagemann, N., Werner, C., Gerten, D., Lucht, W. & Kammann, C., 2019, In : GCB Bioenergy. 11, 4, p. 573-591

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Carbon capture
biochar
Carbon
carbon
Biomass

Raman spectroscopy and shadowgraph visualization of excess protons in high-voltage electrolysis of pure water

Fuchs, E. C., Yntema, D. & Woisetschläger, J., 5 Jul 2019, In : Journal of physics / D. 52, 10 p., 365302.

Research output: Contribution to journalArticleResearchpeer-review

shadowgraph photography
electrolysis
Electrolysis
Raman spectroscopy
Protons

Select this article Numerical Simulation of Planar SOFC Single Cell Fueled by Hydrogen, Nitrogen and Water Vapor Considering Fuel Gas Leakage from Cell Side

Tanaka, T., Inui, Y., Pongratz, G., Subotić, V. & Hochenauer, C., 2019, In : ECS Transactions. 91, 1, p. 2137-2147

Research output: Contribution to journalArticleResearchpeer-review

Semmering-base tunnel - Ice formation of shafts using the example of the supply shaft Fröschnitz 2

Bacher, M., 2019, (Accepted/In press) In : Geomechanics and Tunnelling .

Research output: Contribution to journalArticleResearchpeer-review

Standard-Transktionsmultiplikatoren

Grbenic, S. O., 2019, In : Bewertungs-Praktiker. 15, 3, p. 79-81

Research output: Contribution to journalArticleResearchpeer-review

Standard-Transktionsmultiplikatoren

Grbenic, S. O., 2019, In : Bewertungs-Praktiker. 15, 1, p. 28-30

Research output: Contribution to journalArticleResearchpeer-review

Struktur und Ursachen von Oldtimerunfällen

Gwehenberger, J., Kronthaler, A., Hoschopf, H. & Borrack, M., 10 May 2019, VKU : Verkehrsunfall und Fahrzeugtechnik, 2019, 5, p. 168 - 183.

Research output: Contribution to specialist publicationArticleResearch

Surface structuring by Electron Beam for improved soft tissues adhesion and reduced bacterial contamination on Ti-grade 2

Ferraris, S., Warchomicka, F., Ramskogler, C., Tortello, M., Cochis, A., Scalia, A., Gautier di Confiengo, G., Keckes, J., Rimondini, L. & Spriano, S., 1 Apr 2019, In : Journal of materials processing technology. 266, p. 518-529 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Electron beams
Contamination
Adhesion
Tissue
Fibroblasts

The Agent Role of Purchasing: Antecedents and Implications of Integrating Purchasing Professionals into New Product Development Processes

Schiele, H., Hofman, E., Zunk, B. M. & Eggers, J., 2019, (Submitted) In : International Journal of Innovation Management.

Research output: Contribution to journalArticleResearchpeer-review

The influence of process parameters in linear friction welded 30CrNiMo8 small cross-section: a modelling approach

Effertz, P., Fuchs, F. & Enzinger, N., 2019, In : Science and technology of welding and joining. 24, 2, p. 121-129 9 p.

Research output: Contribution to journalArticleResearchpeer-review

welding
Welding
friction
Flash welding
Friction

Thermal analysis and application of roll bond solar absorbers for heating and cooling in residential buildings

Avsec, J., Brandl, D., Schober, H., Novosel, U. & Ferčec, J., May 2019, In : Journal of Energy Technology. 12, 1, p. 11-21

Research output: Contribution to journalArticleResearchpeer-review

Thermochemical analysis and experimental investigation of a recuperative waste heat recovery system for the tri-reforming of light oil

Gaber, C., Demuth, M., Schluckner, C. & Hochenauer, C., 1 Sep 2019, In : Energy conversion and management. 195, p. 302-312 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Waste heat utilization
Reforming reactions
Exhaust gases
Exhaust gas recirculation
Temperature

Thermo-metallurgically coupled numerical simulation and validation of multi-layer gas metal arc welding of high strength pearlitic rails

Weingrill, L. A., Nasiri, M. B. & Enzinger, N., 9 Jan 2019, In : Welding in the world. 63, 1, p. 63-73 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Gas metal arc welding
Rails
Temperature distribution
Computer simulation
Heat affected zone

Toward harmonizing prospective effectiveness assessment for road safety: Comparing tools in standard test case simulations

Wimmer, P., Düring, M., Chajmowicz, H., Granum, F., King, J., Kolk, H., Op den Camp, O., Scognamiglio, P. & Wagner, M., 12 Jun 2019, In : Traffic injury prevention. 20, sup1, p. S139-S145

Research output: Contribution to journalArticleResearchpeer-review

Towards Digitalisation in Academic Start-ups: An Attempt to classify Start-up Projects of the Gruendungsgarage

Poandl, E. M., 16 Jan 2019, (Accepted/In press) In : International Journal of Engineering Pedagogy.

Research output: Contribution to journalArticleResearchpeer-review

Transaktionsmultiplikatoren: Peer Group - Mysterium Magnum (Teil 1: Selektionsstrategien, Umfang und regionale Zusammensetzung)

Grbenic, S. O. & van Beusichem, H., 2019, In : RWZ - Recht & Rechnungswesen. 3, p. 79-87

Research output: Contribution to journalArticleResearchpeer-review

Transaktionsmultiplikatoren: Peer Group - Mysterium Magnum (Teil 2: Aktuelle Branchenmultiplikatoren für Österreich)

Grbenic, S. O. & van Beusichem, H., 2019, In : RWZ - Recht & Rechnungswesen. 5, p. 145-159

Research output: Contribution to journalArticleResearchpeer-review