Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

Filter
Article
2018

System Design Model for Parallel Hybrid Powertrains using Design of Experiments

Christian, S., Hirz, M., Allouchery, L. & Lichtenegger, S., 3 Apr 2018, In : SAE Technical Papers. 2018-01-0417, 7 p.

Research output: Contribution to journalArticleResearchpeer-review

The effect of Zn content on the mechanical properties of Mg-4Nd-xZn Alloys (x = 0, 3, 5 and 8 wt.%)

Gavras, S., Buzolin, R. H., Subroto, T., Stark, A. & Tolnai, D., 28 Jun 2018, In : Materials. 11, 7, 12 p., 1103.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Intermetallics
Mechanical properties
Grain boundaries
Compression testing
Yield stress

The effects of friction stir processing on the wear beahvior of cast AZ91C magnesium alloy

Hassani, B., Karimzadeh, F., Enayati, M. H., Mutschlechner, F., Vallant, R. & Hassani, K., 2018, In : International Journal of Materials Research. 109, 3, p. 1-9 109.

Research output: Contribution to journalArticleResearchpeer-review

cast alloys
magnesium alloys
Magnesium alloys
friction
Wear of materials

Thermomechanical degradation of polyetherimide (PEI) by friction-based joining and the effects on quasi-static mechanical strength of hybrid joints

Sônego, M., Abibe, A. B., Canevarolo Jr., S. V., Bettini, S. H. P., dos Santos, J. F., Canto, L. B. & Amancio-Filho, S. T., Feb 2018, In : International Polymer Processing.

Research output: Contribution to journalArticleResearchpeer-review

Thermo-mechanical testing of TiO2 functional coatings using friction stir processing

Stummer, M., Enzinger, N. & Weiß, C., 2018, In : Materials Testing. 6, 9, p. 818-824

Research output: Contribution to journalArticleResearchpeer-review

Mechanical testing
Friction
Coatings
Processing
Testing

The Role of Zn Additions on the Microstructure and Mechanical Properties of Mg–Nd–Zn Alloys

Gavras, S., Subroto, T., Buzolin, R. H., Hort, N. & Tolnai, D., 1 Jul 2018, In : International Journal of Metalcasting. 12, 3, p. 428-433 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Mechanical properties
Microstructure
Intermetallics
Compaction
Rare earth alloys

Towards a practical tool for online monitoring of solid oxide fuel cell operation: An experimental study and application of advanced data analysis approaches

Subotić, V., Stoeckl, B., Lawlor, V., Strasser, J., Schroettner, H. & Hochenauer, C., 15 Jul 2018, In : Applied Energy. 222, p. 748-761 14 p.

Research output: Contribution to journalArticleResearchpeer-review

fuel cell
Solid oxide fuel cells (SOFC)
experimental study
oxide
Monitoring

Towards biochar and hydrochar engineering-influence of process conditions on surface physical and chemical properties, thermal stability, nutrient availability, toxicity and wettability

Dieguez-Alonso, A., Funke, A., Anca-Couce, A., Rombolà, A. G., Ojeda, G., Bachmann, J. & Behrendt, F., 25 Feb 2018, In : Energies. 11, 3, 496.

Research output: Contribution to journalArticleResearchpeer-review

Wettability
Thermal Stability
Toxicity
Nutrients
Specific surface area

Validation of dynamic building energy simulation tools based on a real test-box with thermally activated building systems (TABS)

Nageler, P. J., Schweiger, G., Pichler, M., Brandl, D., Mach, T., Heimrath, R., Schranzhofer, H. & Hochenauer, C., 10 Mar 2018, In : Energy and buildings. 168, p. 42-55

Research output: Contribution to journalArticleResearchpeer-review

Computational fluid dynamics
Ceilings
Graphical user interfaces
Air
Concretes
Open Access

Weakly nonlinear instability of a Newtonian liquid jet

Renoult, M-C., Brenn, G., Plohl, G. & Mutabazi, I., 2018, In : Journal of fluid mechanics. 856, p. 169-201

Research output: Contribution to journalArticleResearchpeer-review

Weakly nonlinear instability of a Newtonian liquid jet - Supplement

Renoult, M-C., Brenn, G., Plohl, G. & Mutabazi, I., 2018, In : Journal of fluid mechanics.

Research output: Contribution to journalArticleResearchpeer-review

Welding of S960MC with undermatching filler material

Schneider, C., Ernst, W., Schnitzer, R., Staufer, H., Vallant, R. & Enzinger, N., Apr 2018, In : Welding in the world. 62, 4, p. 801-809 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Wire-based additive manufacturing using an electron beam as heat source

Fuchs, J., Schneider, C. & Enzinger, N., Mar 2018, In : Welding in the world. 62, 2, p. 267-275 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Wirtschaftsingenieurwesen - Berufsbildstudie 2018: Ausbildungslandschaft, Kompetenzprofil und Karriereweg in Österreich

Bauer, U., Priebernig, K., Swobodnik, S. & Zunk, B. M., 25 Jun 2018, In : WING-Business. 51, 2, p. 6-8

Research output: Contribution to journalArticleResearch

Zone-wise investigation of creep behaviour 9Cr–1Mo steel weld joints

Yadav, S. D., Vasantharaja, P., Riedlsperger, F., Nagaraju, S. & Vasudevan, M., 20 Nov 2018, In : Materials science and technology. p. 1-18 18 p.

Research output: Contribution to journalArticleResearchpeer-review

2017

3D Modelling of Flash Formation in Linear Friction Welded 30CrNiMo8 Steel Chain

Effertz, P., Fuchs, F. & Enzinger, N., 21 Oct 2017, In : Metals. 7, 10, 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
Friction welding
Steel
Friction
Welding
Flash welding

4 SCENARIO’S VOOR INKOOP IN 2035: HOOGLERAAR SUPPLY CHAIN MANAGEMENT KIJKT NAAR DE TOEKOMST

Stek, K., 21 Dec 2017, In : Deal!. 2017, 8, p. 45-47 3 p.

Research output: Contribution to journalArticleResearch

Open Access
File
Supply chain management
Purchasing
Scenarios

A Car2X Sensor Model for Virtual Development of Automated Driving

Eichberger, A., Markovic, G., Magosi, Z. F., Rogic, B., Lex, C. & Samiee, S., 7 Sep 2017, International Journal of Advanced Robotic Systems, 14, 5 12 p.

Research output: Contribution to specialist publicationArticleResearchpeer-review

Open Access
Sensors
Adaptive cruise control
Communication
Computer simulation
Testing

A complete strategy for efficient and accurate multibody dynamics of flexible structures with large lap joints considering contact and friction

Pichler, F., Witteveen, W. & Fischer, P., 1 Aug 2017, In : Multibody System Dynamics. 40, 4, p. 407-436 30 p.

Research output: Contribution to journalArticleResearchpeer-review

Flexible Structure
Multibody Dynamics
Flexible structures
Component Mode Synthesis
Friction

Adaption of the LHC cold mass cooling system to the requirements of the Future Circular Collider (FCC)

Kotnig, C., Tavian, L. & Brenn, G., 30 Dec 2017, In : IOP Conference Series / Materials Science and Engineering. 278, 1, 012089.

Research output: Contribution to journalArticleResearchpeer-review

Colliding beam accelerators
Cooling systems
Cooling
Superfluid helium
Magnets

Adaptive Grinding Process (AGriPro) – Prevention of Thermal Damage using OPC UA Technique and in-Situ Metrology

Steffan, M., Haas, F., Pierer, A. & Gentzen, J., 30 Aug 2017, In : Journal of Manufacturing Science and Engineering. 139, 12

Research output: Contribution to journalArticleResearchpeer-review

Advanced Heat Transfer and Underhood Airflow Investigation with Focus on Continuously Variable Transmission (CVT) of Snowmobiles

Wurm, J., Hochenauer, C., Väisänen, E., Hurtig, E. & Mähönen, J., 16 Sep 2017, In : SAE International journal of commercial vehicles. 10, 2, 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Heat transfer
Pulleys
Snow
Cooling systems
Temperature

A holistic investigation of natural gas–diesel dual fuel combustion with dual direct injection for passenger car applications

Fasching, P., Sprenger, F. & Granitz, C., 10 Jul 2017, In : Automotive and Engine Technology.

Research output: Contribution to journalArticleResearchpeer-review

Air Starvation Induced Degradation in Polymer Electrolyte Fuel Cells

Bodner, M., Schenk, A., Salaberger, D., Rami, M., Hochenauer, C. & Hacker, V., 2 Feb 2017, In : Fuel Cells. 17, 1, p. 18-26 9 p.

Research output: Contribution to journalArticleResearchpeer-review

An Investigation of Innovative Experimental and Numerical Techniques to Detect Boundary Layer Transition

Cinciripini, A., Bader, P., Persico, G. & Sanz, W., 2017, In : Journal of Mechanics Engineering and Automation. 7, 4

Research output: Contribution to journalArticleResearchpeer-review

An investigation of the hydrodynamic similarity of single-spout fluidized beds using CFD-DEM simulations

Ebrahimi, M., Siegmann, E., Prieling, D., Glasser, B. J. & Khinast, J. G., Oct 2017, In : Advanced powder technology. 28, 10, p. 2465-2481

Research output: Contribution to journalArticleResearchpeer-review

A novel approach for dynamic gas conditioning for PEMFC stack testing

Kancsár, J., Striednig, M., Aldrian, D., Trattner, A., Klell, M., Kügele, C. & Jakubek, S., 30 Nov 2017, In : International Journal of Hydrogen Energy. 42, 48, p. 28898-28909 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Gas dynamics
gas dynamics
Proton exchange membrane fuel cells (PEMFC)
conditioning
fuel cells

Application of thermo-calc TCFE7 to high-alloyed mottled cast iron

Paar, A., Elizondo, L., Brandner, M., Trickl, T., Sonderegger, B., Beal, C. & Sommitsch, C., 2017, In : Materials Science Forum. 879, p. 1431-1436 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Cast iron
casts
Thermodynamics
iron
thermodynamics

Atom probe investigations on temper embrittlement and reversible temper embrittlement in S 690 steel weld metal

Cerjak, H-H., Mendez Martin, F. & Domakova, M., 7 Jul 2017, In : Science and technology of welding and joining. p. 1743-2936 9 p.

Research output: Contribution to journalArticleResearchpeer-review

embrittlement
Steel
Embrittlement
Welds
Metals

Autonomes Fahren: Mit der Zukunft lernen: Was kommt mit dem selbstfahrenden Auto auf uns zu? Wie werden Straßen und Stadtplanung in der Zukunft aussehen? Eine Annäherung an die Mobilität der Zukunft.

Pitour, M. & Eichberger, A., 1 Nov 2017, Volkswagen Magazin, November 2017 1 p.

Research output: Contribution to specialist publicationArticleResearch

Bring me: sustainable urban delivery service for the city of Graz

Trummer, W. & Hafner, N., 2017, In : Advanced Logistic Systems. 11 (2017), 1, p. 29 40 p.

Research output: Contribution to journalArticleResearchpeer-review

Business Model Innovation vs. Business Model Inertia: the Role of Disruptive Technologies

Vorbach, S., Wipfler, H. & Schimpf, S., Sep 2017, In : Berg- und hüttenmännische Monatshefte. 162, 9, p. 382–385

Research output: Contribution to journalArticleResearchpeer-review

Open Access

CFD analysis of a pusher type reheating furnace and the billet heating characteristic

Mayr, B., Prieler, R. J., Demuth, M., Moderer, L. & Hochenauer, C., 25 Mar 2017, In : Applied Thermal Engineering. 115, p. 986-994

Research output: Contribution to journalArticleResearchpeer-review

CFD modelling and performance increase of a pusher type reheating furance using oxy-fuel burners

Mayr-Mittermüller, B., Prieler, R. J., Demuth, M., Moderer, L. & Hochenauer, C., 2017, In : Energy Procedia. 120, p. 462-468 7 p.

Research output: Contribution to journalArticleResearchpeer-review

CFD modelling and performance increase of a pusher type reheating furnace using oxy-fuel burners

Mayr, B., Prieler, R., Demuth, M., Moderer, L. & Hochenauer, C., 2017, In : Energy Procedia. 120, p. 462-468 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Fuel burners
Computational fluid dynamics
Furnaces
Air
Productivity

CFD-simulation of effective carbon gasification strategies from high temperature SOFC Ni–YSZ cermet anodes

Schluckner, C., Subotić, V., Lawlor, V. & Hochenauer, C., 16 Feb 2017, In : International Journal of Hydrogen Energy. 42, 7, p. 4434 - 4448 15 p.

Research output: Contribution to journalArticleResearchpeer-review

Characterizing dislocation configurations and their evolution during creep of a new 12% Cr steel

Yadav, S. D., EI-Tahawy, M., Kalácska, S., Dománková, M., Canelo Yubero, D. & Poletti, M. C., Dec 2017, In : Materials characterization. 134, p. 387-397

Research output: Contribution to journalArticleResearchpeer-review

Steel
Convolution
Creep
steels
Transmission electron microscopy

CO/CO2 ratio in biomass char oxidation

Anca-Couce, A., Sommersacher, P., SHIEHNEJADHESAR, A., Mehrabian Bardar, R., Hochenauer, C. & Scharler, R., 2017, In : Energy Procedia. 120, p. 238-245

Research output: Contribution to journalArticleResearchpeer-review

Colliding drops as coalescing and fragmenting liquid springs

Planchette, C., Hinterbichler, H., Liu, M., Bothe, D. & Brenn, G., 2017, In : Journal of fluid mechanics. 814, p. 277-300

Research output: Contribution to journalArticleResearchpeer-review

Comparison between solid body and gas radiation in high temperature furnaces under different oxygen enrichments

Mayr-Mittermüller, B., Prieler, R. J., Demuth, M. & Hochenauer, C., 25 Dec 2017, In : Applied Thermal Engineering. 127, p. 679-688

Research output: Contribution to journalArticleResearchpeer-review

Comparison of numerical forced response predictions with experimental results obtained in a subsonic test turbine facility

Marn, A., Schönleitner, F., Mayr, M. & Heitmeir, F., 2017, In : Technische Mechanik. 37, 2-5, p. 139-150 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Turbines
Rotors
Engines
Turbomachine blades
Stators

Complexity analysis of material handling design processes

Telek, P. & Landschützer, C., 15 Dec 2017, In : Advanced Logistic Systems. p. 61 18 p.

Research output: Contribution to journalArticleResearchpeer-review

Computational analysis of a semi-industrial furnace fired by a flat flame burner under different O2/N2 ratios using the steady laminar flamelet approach

Mayr, B., Prieler, R. J., Demuth, M., Potesser, M. & Hochenauer, C., 2017, In : Journal of the Energy Institute. 90, 4, p. 602–612

Research output: Contribution to journalArticleResearchpeer-review

Considering influences of sustainable production in early automotive engineering phases

Brunner, H., Hirz, M. & Wurzer, A., 30 May 2017, In : Annals of Faculty Engineering Hunedoara – International Journal of Engineering . 15, 2, p. 85-90 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Determining a function for the damping coefficient of a laminated stack

Zahalka, C. & Ellermann, K., 2017, In : Technische Mechanik. 37, 2-5, p. 161-170 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Steel sheet
Damping
Sheet metal
Stators
Hysteresis

Development of a numerically efficient CFD model to predict transient temperature distribution of mother tubes moving translative and rotative through a gas fired furnace

Landfahrer, M., Prieler, R. J., Mayr-Mittermüller, B., Gerhardter, H., Schöngrundner, R., Klarner, J. & Hochenauer, C., 2017, In : Applied Thermal Engineering. 123, p. 290-300 10 p.

Research output: Contribution to journalArticleResearchpeer-review