Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

Filter
Article
1997

A Contribution to the Increase in Yield Strength during the Bake Hardening Process

Kozeschnik, E. & Buchmayr, B., 1997, In : Steel research. 68, p. 224-230

Research output: Contribution to journalArticleResearch

Air heating systems for low-energy buildings

Halozan, H. & Rieberer, R., 1997, IEA Heat Pump Centre newsletter.

Research output: Contribution to specialist publicationArticleResearch

A New Apparatus for the Production of Monodisperse Sprays at High Flow Rates

Brenn, G., Helpiö, T. & Durst, F., 1997, In : Chemical Engineering Science. 52, p. 237-244

Research output: Contribution to journalArticleResearchpeer-review

Application of Computational Methods for the Determination of Traffic Emissions

Sturm, P-J., Almbauer, R., Sudy, C. & Pucher, K., 1997, In : Journal of the Air & Waste Management Association. 47, 11, p. 1204-1210

Research output: Contribution to journalArticleResearchpeer-review

A review of the development and characteristics of planar phase-Doppler anemometry

Durst, F., Brenn, G. & Xu, T-H., 1997, In : Measurement science & technology. 8, p. 1203-1221

Research output: Contribution to journalArticleResearchpeer-review

Die EU braucht gemeinsame Ausbildungsstandards: Universität Dortmund schafft Vollzeit- Studiengang Logistik

Jodin, D., 1997, In : Deutsche Verkehrs-Zeitung. 51, 125, p. 22-23

Research output: Contribution to journalArticleResearch

Drop formation from a vibrating orifice generator driven by modulated electrical signals

Brenn, G. & Lackermeier, U., 1997, In : Physics of fluids. 9, p. 3658-3669

Research output: Contribution to journalArticleResearchpeer-review

Flowfield characteristics of an aerodynamic acoustic levitator

Yarin, A. L., Brenn, G., Keller, J., Pfaffenlehner, M., Ryssel, E. & Tropea, C., 1997, In : Physics of fluids. 9, p. 3300-3314

Research output: Contribution to journalArticleResearchpeer-review

Growth of traffic emissions in Austria

Hausberger, S. & Sturm, P-J., 1997, In : International journal of vehicle design. Volume 18, No. 3/4, p. 243-262

Research output: Contribution to journalArticleResearchpeer-review

Improved resolution in HREELS using maximum-entropy deconvolution: CO on PtxNi1−x(111)

von der Linden, W., Dose, V., Matzdorf, R., Pantförder, A., Meister, G. & Goldmann, A., 1 Jan 1997, In : Journal of electron spectroscopy and related phenomena. 83, 1, p. 1-7 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Electron energy loss spectroscopy
Deconvolution
Carbon Monoxide
Entropy
energy dissipation

Investigation of the Stochastic Collisions of Drops Produced by Rayleigh Breakup of Two Laminar Liquid Jets

Brenn, G., Kalenderski, I. & Ivanov, I., 1997, In : Physics of fluids. 9, p. 349-364

Research output: Contribution to journalArticleResearchpeer-review

Measurement of Condensation Heat Transfer Coefficients at Stratified Flow Using Linear Raman Spectroscopy

Karl, J. & Weiss, T., 1997, In : Journal of flow visualization and image processing. 4, p. 231-244

Research output: Contribution to journalArticleResearchpeer-review

Methods and tools for advanced fuel spray production and investigation

Brenn, G., Durst, F., Trimis, D. & Weclas, M., 1997, In : Atomization and Sprays. 7, p. 43-75

Research output: Contribution to journalArticleResearchpeer-review

Microstructural evaluation of aged 9-12% Cr steels containing W

Cerjak, H-H., Hofer, P., Schaffernak, B. & Warbichler, P., 1997, In : Practical metallography = Praktische Metallographie. 27, p. 0-0

Research output: Contribution to journalArticleResearchpeer-review

New Work - Trends und Konsequenzen

Bauer, U., 1997, In : Der Wirtschaftsingenieur. 3, p. 3-3

Research output: Contribution to journalArticleResearch

Optimierung der Übergabe Horizontal-Vertikalförderer

Kartnig, G., 1997, In : Deutsche Hebe- und Fördertechnik. 9, p. 29-32

Research output: Contribution to journalArticleResearch

Sie kann Leben retten- ein Plädoyer für die Kopfstütze

Lorek, F. & Eichberger, A., 1997, In : Mot - die Autozeitschrift. 4, p. 66-69

Research output: Contribution to journalArticleResearch

Spherical blast waves propagating in reacting gas mixtures

Gretler, W. & Hirschler, T., 1997, In : Zeitschrift für angewandte Mathematik und Mechanik. 77, SI, p. SECTION9-SECTION9

Research output: Contribution to journalArticleResearchpeer-review

Stability of motion for oscillation with dry friction

Oblak, M., Butinar, B. & Ciglaric, I., 1997, In : Zeitschrift für angewandte Mathematik und Mechanik. p. 247-248

Research output: Contribution to journalArticleResearchpeer-review

The Main Parameters Influencing the Creep Resistance of Advanced 9- to 12% Cr Steels for Power Plant Applications

Cerjak, H-H., Hofer, P. & Schaffernak, B., 1997, In : VGB-Kraftwerkstechnik. 77, 9, p. 691-698

Research output: Contribution to journalArticleResearch

Verarbeitungs- und Gebrauchseigenschaften von Werkstoffen

Sommitsch, C., 1997, In : Schweissen und Schneiden <Düsseldorf, 1949 ->. 8, p. 568-575

Research output: Contribution to journalArticleResearch

Verbesserung des dynamischen Verhaltens von Wandertischen in Rotary Racks

Reisinger, K-H. & Kartnig, G., 1997, In : DHF. 4, p. 39-44

Research output: Contribution to journalArticleResearch

Vitale Kompetenzausrichtung von universitären Know-How-Dienstleistungen

Bauer, U., 1997, In : Der Wirtschaftsingenieur. 4, p. 28-30

Research output: Contribution to journalArticleResearch

Anthropoidic measuring devices in coordinate measuring techniques

Kovac, I., 1998, In : Strojniski vestnik - Journal of mechanical engineering. 44, 5/6, p. 175-182

Research output: Contribution to journalArticleResearchpeer-review

Automatic Optimization of Pre-Impact Parameters Using Post-Impact Trajectories and Rest Positions

Steffan, H. & Moser, A., 1998, In : SAE Technical Papers. 980373, p. 22-22

Research output: Contribution to journalArticleResearch

Das EU-3 Abgaskonzept für den neuen Vierzylinder-Dieselmotor von BMW

Eichlseder, H. & Steinmayr, T., 1998, In : Motortechnische Zeitschrift. 59, p. 344-348

Research output: Contribution to journalArticleResearch

Design sensitivity analysis of industrial robot

Ciglaric, I. & Oblak, M., 1998, In : Zeitschrift für angewandte Mathematik und Mechanik. 78, 3, p. 881-882

Research output: Contribution to journalArticleResearchpeer-review

Die Karbonatschmelzen-Brennstoffzelle

Hacker, V., Friedrich, K. & Jericha, H., 1998, In : e&i - Elektrotechnik und Informationstechnik. 5, p. 236-244

Research output: Contribution to journalArticleResearchpeer-review

Differential Interferometry with Adjustable Spatial Carrier Fringes for Turbine Blade Cascade Flow Investigations

Woisetschläger, J., Pretzler, G., Jericha, H., Mayrhofer, N. & Pirker, H. P., 1998, In : Experiments in fluids. 24, p. 102-109

Research output: Contribution to journalArticleResearchpeer-review

Erweiterte Phasen-Doppler-Anemometrie zur Untersuchung dreiphasiger Strömungen

Braeske, H., Brenn, G., Domnick, J., Durst, F., Melling, A. & Ziema, M., 1998, In : Chemie-Ingenieur-Technik. 70, p. 737-742

Research output: Contribution to journalArticleResearchpeer-review

Experimental investigations of the binary interaction of polydisperse sprays

Brenn, G., Durst, F. & Selbach, A., 1998, In : Particle & particle systems characterization. 15, p. 263-273

Research output: Contribution to journalArticleResearchpeer-review

Extended phase-Doppler anemometry for measurements in three-phase flows

Braeske, H., Brenn, G., Domnick, J., Durst, F., Melling, A. & Ziema, M., 1998, In : Chemical engineering & technology. 21, p. 415-420

Research output: Contribution to journalArticleResearchpeer-review

Finite deformation coupled thermomechanical problems and 'generalized standard materials'

Celigoj, C., 1998, In : International journal for numerical methods in engineering. 42, p. 1025-1043

Research output: Contribution to journalArticleResearchpeer-review

'Generalized standard materials' and finite deformation coupled thermo-elastoviscoplasticity including damage

Celigoj, C., 1998, In : Zeitschrift für angewandte Mathematik und Mechanik. 78, Supplement, p. 327-328

Research output: Contribution to journalArticleResearchpeer-review

High-tech im Karosserieblech

Kozeschnik, E., 1998, In : Made in Styria. 1, p. 64-65

Research output: Contribution to journalArticleResearch

In den Normen der Automobilindustrie stecken die neuersten Erkenntnisse

Danzer, H. H., 1998, In : Management und Qualität. 11+12/98, p. 16-20

Research output: Contribution to journalArticleResearch

Open Access
File

Instantaneous emission data and their use in estimating road traffic emissions

Sturm, P-J., Schinagl, G., Hausberger, S. & Almbauer, R., 1998, In : International journal of vehicle design. Volumd 20, No.1/2/3/4, p. 181-191

Research output: Contribution to journalArticleResearchpeer-review

Linear analysis of the instability of two-dimensional non-Newtonian liquid sheets

Liu, Z. B., Brenn, G. & Durst, F., 1998, In : Journal of non-Newtonian fluid mechanics. 78, 2-3, p. 133-166

Research output: Contribution to journalArticleResearchpeer-review

Neue Medien contra Druckerschwärze?

Haberfellner, R., 1998, In : Academia . 49, 2, p. 36-37

Research output: Contribution to journalArticleResearch

Numerical Investigation of the Stall Onset Behaviour of the Ga(W)-1 Airfoil

Sanz, W. & Platzer, M. F., 1998, In : Computers & fluids. 27, 5-6, p. 681-687

Research output: Contribution to journalArticleResearchpeer-review

Numerical solution for spherical laser-driven shock waves

Steiner, H., Gretler, W. & Hirschler, T., 1998, In : Shock waves. 8, 3, p. 139-147

Research output: Contribution to journalArticleResearchpeer-review

On- and off-line investigations of the fluid-assisted atomization of molten metals

Raimann, J., Brenn, G., Durst, F., Wolf, G., Bergmann, H. W., Cabot, M. S., Berlemont, A., Brito Correia, J. & Shohoji, N., 1998, In : Metal powder report. 53, p. 44-47

Research output: Contribution to journalArticleResearch

On the Application of Energy-Filtering TEM in Materials Science: III. Precipitates in Steel

Warbichler, P., Hofer, F., Hofer, P., Letofsky, E. & Cerjak, H-H., 1998, In : Micron. p. 63-72

Research output: Contribution to journalArticleResearchpeer-review

On the Navier-Stokes Calculation of Separation Bubbles with a New Transition Model

Sanz, W. & Platzer, M. F., 1998, In : Journal of Turbomachinery. 120, p. 36-42

Research output: Contribution to journalArticleResearchpeer-review

PDA-Messungen in den fluidgestützten Prozessen der Metallpulverherstellung

Raimann, J., Wolf, G., Brenn, G. & Durst, F., 1998, In : Verfahrenstechnik (Mainz). 32, p. 64-65

Research output: Contribution to journalArticleResearch

Qualifikationsanforderung an Wirtschaftsingenieure

Bauer, U., 1998, In : Der Wirtschaftsingenieur. 1, p. 34-37

Research output: Contribution to journalArticleResearch

Quantification of Precipitates in Advanced Creep Resistant 9-12% Cr Steels

Hofer, P., Cerjak, H-H. & Schaffernak, B., 1998, In : Steel research. 69, 8, p. 343-348

Research output: Contribution to journalArticleResearch