Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

Filter
Article
2017

Complexity analysis of material handling design processes

Telek, P. & Landschützer, C., 15 Dec 2017, In : Advanced Logistic Systems. p. 61 18 p.

Research output: Contribution to journalArticleResearchpeer-review

Computational analysis of a semi-industrial furnace fired by a flat flame burner under different O2/N2 ratios using the steady laminar flamelet approach

Mayr, B., Prieler, R. J., Demuth, M., Potesser, M. & Hochenauer, C., 2017, In : Journal of the Energy Institute. 90, 4, p. 602–612

Research output: Contribution to journalArticleResearchpeer-review

Considering influences of sustainable production in early automotive engineering phases

Brunner, H., Hirz, M. & Wurzer, A., 30 May 2017, In : Annals of Faculty Engineering Hunedoara – International Journal of Engineering . 15, 2, p. 85-90 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Determining a function for the damping coefficient of a laminated stack

Zahalka, C. & Ellermann, K., 2017, In : Technische Mechanik. 37, 2-5, p. 161-170 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Steel sheet
Damping
Sheet metal
Stators
Hysteresis

Development and Analysis of Radial Force Waves in Electrical Rotating Machines

Haas, S. & Ellermann, K., 2017, In : Technische Mechanik. 37, 2-5, p. 218-225 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Steel sheet
Damping
Sheet metal
Stators
Hysteresis

Development of a numerically efficient CFD model to predict transient temperature distribution of mother tubes moving translative and rotative through a gas fired furnace

Landfahrer, M., Prieler, R. J., Mayr-Mittermüller, B., Gerhardter, H., Schöngrundner, R., Klarner, J. & Hochenauer, C., 2017, In : Applied Thermal Engineering. 123, p. 290-300 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Development of Cell-Protecting Methods for Carbon-Removal from Porous Ni-YSZ Anodes and Regeneration of the Cell Performance

Subotić, V., Stöckl, B., Schluckner, C., Pofahl, S., Lawlor, V., Schröttner, H. & Hochenauer, C., 2017, In : ECS Transactions. 78, 1, p. 2441-2449 9 p.

Research output: Contribution to journalArticleResearchpeer-review

DNS based analytical P-function model for RANS with heat transfer at high Prandtl numbers

Irrenfried, C. & Steiner, H., 2017, In : International journal of heat and fluid flow. 66, p. 217-225

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Effect of tempering time on the mechanical properties of P91 flux cored wire weld metal

Baumgartner, S., Holy, A., Schuler, M., Schnitzer, R. & Enzinger, N., 2017, In : Welding in the world. 61, 1, p. 11-19

Research output: Contribution to journalArticleResearchpeer-review

Employability of IEM Graduates

Bauer, U., 2017, In : ESTIEM magazine. 52, p. 28-30

Research output: Contribution to journalArticleResearch

Enhanced knowledge-based 3D-CAD methods supporting automotive body-in-white production engineering

Hirz, M. & Rossbacher, P., 30 May 2017, In : ACTA Technica Corviniensis. 2012, 2, p. 123-128 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Enhancing mechanical properties of wires by a novel continuous severe plastic deformation method

Pourbashiri, M., Sedighi, M., Poletti, M. C. & Sommitsch, C., 2017, In : International journal of materials research = Zeitschrift für Metallkunde. 108, 9, p. 741-749 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
plastic deformation
Plastic deformation
wire
Wire
mechanical properties

Ermittlung von Reifeneigenschaften für die Feststellung der Verkehrssicherheit im Rahmen der Hauptuntersuchung

Schabauer, M., Hackl, A. & Lex, C., 10 Aug 2017, In : Zeitschrift für Verkehrssicherheit. 63, 3, p. 59-67 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Tires
Inspection
Wear of materials
Cracks
Costs

Experimentelle und nummerische Untersuchungen einer Gasabsorptionswärmepumpe

Emhofer, J., Zottl, A., Köfinger, C., Wechsler, R. & Rieberer, R., Mar 2017, KI - Kälte, Luft, Klimatechnik.

Research output: Contribution to specialist publicationArticleResearch

Extensive analysis of large planar SOFC: Operation with humidified methane and carbon monoxide to examine carbon deposition based degradation

Stöckl, B., Subotić, V., Reichholf, D., Schröttner, H. & Hochenauer, C., 4 Oct 2017, In : Electrochimica acta. 256, p. 325-336 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Flame-wall Interactions in a Spark-ignition Engine

Schutting, E., Suckart, D., Linse, D. & Eichlseder, H., Sep 2017, In : Motortechnische Zeitschrift. 78, 10, p. 66-69

Research output: Contribution to journalArticleResearch

Flexible parameterization strategies in automotive 3D vehicle layout

Rossbacher, P. & Hirz, M., 2017, In : Computer-aided design and applications. p. 549-562

Research output: Contribution to journalArticleResearchpeer-review

Flow Evolution Through a Turning Midturbine Frame with Embedded Design

Bader, P., Sanz, W., Spataro, R. & Göttlich, E., 2017, In : Journal of propulsion and power. p. 411-424

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Forschungsmethoden in der Verbindung Gender und Technik: Research Methods Linking Gender and Technology

Koglbauer, I. V., 2017, In : Psychologie in Österreich. 37, 5, p. 354 359 p.

Research output: Contribution to journalArticleResearchpeer-review

Frauen fahren anders, Männer auch

Senarclens de Grancy, A., Eichberger, A. & Koglbauer, I. V., 4 Feb 2017, Die Presse, Ausgabe vom 4.2.2107.

Research output: Contribution to specialist publicationArticleResearch

Friction Investigations on the Diesel Engine in Combustion Mode - A New Measuring Method

Wichtl, R., Eichlseder, H., Mallinger, W. & Peterek, R., Dec 2017, In : MTZ Worldwide. 12/2017, p. 28-33 5 p.

Research output: Contribution to journalArticleResearch

Fuel Preparation and Combustion in Rocket and Jet Engines

Brenn, G., Kozlov, A. A., Borovik, I. N. & Strokach, E. A., 2017, In : Russian Engineering Research. 37, 10, p. 857-862

Research output: Contribution to journalArticleResearchpeer-review

Fully Atomistic Understanding of the Electronic and Optical Properties of a Prototypical Doped Charge-Transfer Interface

Baby, A., Gruenewald, M., Zwick, C., Otto, F., Forker, R., Van Straaten, G., Franke, M., Stadtmüller, B., Kumpf, C., Brivio, G. P., Fratesi, G., Fritz, T. & Zojer, E., 24 Oct 2017, In : ACS Nano. 11, 10, p. 10495-10508 14 p.

Research output: Contribution to journalArticleResearchpeer-review

Electronic properties
Charge transfer
Optical properties
charge transfer
Doping (additives)

Future trends in CAD – from the perspective of automotive industry

Hirz, M., Rossbacher, P. & Gulanova, J., 7 Jul 2017, In : Computer-aided design and applications.

Research output: Contribution to journalArticleResearchpeer-review

Generative engineering design methodology used for the development of surface-based components

Gulanova, J., Gulan, L., Forrai, M. & Hirz, M., 2017, In : Computer-aided design and applications.

Research output: Contribution to journalArticleResearchpeer-review

GE’s J920 Gas Engine — 10.4 MW Power and more than 50 % Electrical Efficiency

Birgel, A., Böwing, R., Trapp, C. & Wimmer, A., 1 Sep 2017, In : MTZ industrial. 7, 2, p. 40-47

Research output: Contribution to journalArticleResearch

Grazer Autorenteam ausgezeichnet: Outstanding Paper Award FISITA 2016

Pessl, B., Leitner, M. & Fabian, J., 2017, ÖIAN- das Kommunikationsmagazin des Österreichischen Ingenieur- und Architekten-Vereins.

Research output: Contribution to specialist publicationArticleResearch

Hohe solare Deckungsgrade durch thermisch aktivierte Bauteile

Ramschak, T., Fink, C., Heimrath, R., Lerch, W. & Mach, T., 2017, In : Nachhaltige Technologien - erneuerbare Energien und Ressourceneffizienz. 04/2017, p. 24-26

Research output: Contribution to journalArticleResearch

Impact of cyclic lean-rich aging unter DeSOx condition on the lean-gas light-off and hydrogen formation ability of a lean NOx trap (LNT)

Maurer, M., Fortner, T., Holler, P., Zarl, S. & Eichlseder, H., 7 Jul 2017, In : Automotive and Engine Technology. 15 p.

Research output: Contribution to journalArticleResearchpeer-review

Improved Modeling of Near-Wall Heat Transport for Cooling of Electric and Hybrid Powertrain Components by High Prandtl Number Flow

Saric, S., Ennemoser, A., Basara, B., Petutschnig, H., Irrenfried, C., Steiner, H. & Brenn, G., 2017, In : SAE international journal of engines. 10, 3, p. 778-784

Research output: Contribution to journalArticleResearchpeer-review

Improving the behavioral realism of global integrated assessment models: An application to consumers’ vehicle choices

McCollum, D. L., Wilson, C., Pettifor, H., Ramea, K., Krey, V., Riahi, K., Bertram, C., Lin, Z., Edelenbosch, O. Y. & Fujisawa, S., 1 Aug 2017, In : Transportation Research / D. 55, p. 322-342 21 p.

Research output: Contribution to journalArticleResearchpeer-review

realism
energy
purchase
Consumer behavior
consumption behavior

Influence of backward-and forward-facing steps on the flow through a turning mid turbine frame

Bauinger, S., Goettlich, E., Heitmeir, F. & Malzacher, F., 1 Dec 2017, In : Journal of Turbomachinery. 139, 12, 121005.

Research output: Contribution to journalArticleResearchpeer-review

Turbines
Rotors
Ducts
Engines
3D printers

Influence of heterogeneous secondary reactions during slow pyrolysis on char oxidation reactivity of woody biomass

Anca-Couce, A., Dieguez-Alonso, A., Zobel, N., Berger, A., Kienzl, N. & Behrendt, F., 2017, In : Energy & fuels.

Research output: Contribution to journalArticleResearchpeer-review

Influence of Ti on the toughness of the FGHAZ and the CGHAZ of high-strength microalloyed S700MC steels

Spachinger, S. J., Ernst, W. & Enzinger, N., 30 May 2017, In : Welding in the world. 61, 6, p. 1117-1131

Research output: Contribution to journalArticleResearchpeer-review

Influences of system uncertainties on the numerical transfer path analysis of engine systems

Acri, A., Nijman, E., Acri, A. & Offner, G., 24 Mar 2017, In : Mechanical Systems and Signal Processing. 95, p. 106-121

Research output: Contribution to journalArticleResearchpeer-review

Innovative surface modification of Ti6Al4V alloy by electron beam technique for biomedical application

Ramskogler, C., Warchomicka, F. G., Mostofi, S., Weinberg, A. & Sommitsch, C., 11 Apr 2017, In : Materials science and engineering / C. 78, p. 105 - 113

Research output: Contribution to journalArticleResearchpeer-review

In-operando Detection of Carbon Depositions and Carbon Formation Predictions for Industrial-Sized SOFCs Fueled with Synthetic Diesel Reformate

Subotić, V., Schluckner, C., Stöckl, B., Reichholf, D., Lawlor, V., Pofahl, S., Schröttner, H. & Hochenauer, C., 2017, In : ECS Transactions. 78, 1, p. 2451-2460 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Investigation of creep cavities in a novel 12Cr0.36Ta steel employing three-dimensional electron backscatter diffraction technique

Yadav, S. D., Jäntsch, U., Scherer, T., Ahmadi, M. R., Rosc, J. & Poletti, C., 15 Nov 2017, In : Materials Letters. 207, p. 76-79 4 p.

Research output: Contribution to journalArticleResearchpeer-review

Steel
Electron diffraction
Creep
steels
cavities

Macrodamage Accumulation Model for a Human Femur

Hamandi, F. & Goswami, T., 2017, In : Applied Bionics and Biomechanics. 2017, 4539178.

Research output: Contribution to journalArticleResearchpeer-review

Femur
Bone
Bone and Bones
Growth
Bone Fractures

Methodology to Facilitate Successful Lean Implementation

Berlec, T., Kleindienst, M., Rabitsch, C. & Ramsauer, C., 16 Jun 2017, In : Strojniski vestnik - Journal of mechanical engineering.

Research output: Contribution to journalArticleResearchpeer-review

Microstructure and residual stresses in a friction stir welded butt joint of as-cast ZK60 alloy containing rare earths

Da Silva, E. P., Oliveira, V. B., Pereira, V. F., Maluf, O., Buzolin, R. H. & Pinto, H. C., 1 May 2017, In : Materials research. 20, 3, p. 775-779 5 p.

Research output: Contribution to journalArticleResearchpeer-review

butt joints
friction stir welding
Friction stir welding
cast alloys
Rare earths

Mobile Flywheel Energy Storage Systems: Determining Rolling Element Bearing Loads to Expand Possibilities

Buchroithner, A., Brandstatter, A. & Recheis, M., 1 Sep 2017, In : IEEE Vehicular Technology Magazine. 12, 3, p. 83-94 12 p., 7993067.

Research output: Contribution to journalArticleResearchpeer-review

Bearings (structural)
Flywheels
Energy storage
Life cycle
Vacuum

Modeling of precipitation strengthening in Inconel 718 including non-spherical gamma '' precipitates

Ahmadi, M. R., Rath, M., Povoden-Karadeniz, E., Primig, S., Wojcik, T., Danninger, A., Stockinger, M. & Kozeschnik, E., Jul 2017, In : Modelling and simulation in materials science and engineering. 25, 5, 16 p., 055005.

Research output: Contribution to journalArticleResearchpeer-review

Inconel (trademark)
Strengthening
Precipitates
precipitates
Strengthening (metal)

Modeling of precipitation strengthening in Inconel 718 including non-spherical γ'' precipitates

Ahmadi, M. R., Rath, M., Povoden-Karadeniz, E., Primig, S., Wojcik, T., Danninger, A., Stockinger, M. & kozeschnik, E., Jul 2017, In : Modelling and simulation in materials science and engineering. p. 1-16 16 p., 055005 .

Research output: Contribution to journalArticleResearchpeer-review

Inconel (trademark)
Strengthening
Precipitates
precipitates
Strengthening (metal)

Modelling heat of reaction in biomass pyrolysis with detailed reaction schemes

Anca-Couce, A. & Scharler, R., 2017, In : Fuel. 206, p. 572-579

Research output: Contribution to journalArticleResearchpeer-review

Modelling the flash formation of linear friction welded 30CrNiMo8 high strength steel chains

Effertz, P., Fuchs, F. & Enzinger, N., 3 Apr 2017, In : The international journal of advanced manufacturing technology.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
Friction welding
High strength steel
Friction
Flash welding
Butt welding

Modulare Planung urbaner Energieversorgungskonzepte

Mach, T., Fink, C., Heimrath, R., Leusbrock, I. & Fluch, J., 2017, In : Nachhaltige Technologien - erneuerbare Energien und Ressourceneffizienz. 01/2017, p. 12 - 14

Research output: Contribution to journalArticleResearch