Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

Filter
Article
2016

Semi-empirische Modelle für hermetische Kühlschrankkompressoren

Posch, S., Berger, E., Heimel, M., Almbauer, R., Strasser, A. T. & Stupnik, A., May 2016, In : KI - Kälte, Luft, Klimatechnik. 05-16, p. 51-55

Research output: Contribution to journalArticleResearchpeer-review

Simulator training improves pilots’ procedural memory and generalization of behavior in critical flight situations

Koglbauer, I. V., 2016, In : Cognition, Brain, Behavior . 20, 4, p. 357-366

Research output: Contribution to journalArticleResearchpeer-review

Space-Resolved Extraction of the Combustion Product Gas of a Commercial Small-Scale Boiler for Wood-Chips with a High Fine and Bark Fraction

Edlbauer, M., Straßl, M., Roitinger, G. & Hochenauer, C., 16 May 2016, In : Energy & fuels. p. 5705 - 5715 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Boilers
Wood
Gases
Tars
Tar

Spatially resolved chemical species concentrations above the fuel bed of a small grate-fired wood-chip boiler

Buchmayr, M., Gruber, J., Hargassner, M. & Hochenauer, C., 2016, In : Biomass & Bioenergy. 95, p. 146-156

Research output: Contribution to journalArticleResearchpeer-review

Speicherung mit Phasenwechslern

Schranzhofer, H., Moser, C., Englmair, G. & Furbo, S., Nov 2016, In : Der österreichische Installateur. 11/2016, p. 50-51 2 p.

Research output: Contribution to journalArticleResearch

Standard-Transktionsmultiplikatoren

Grbenic, S. O., 2016, In : Bewertungs-Praktiker. 12, 3, p. 107-108

Research output: Contribution to journalArticleResearchpeer-review

Steigerung der Kundenattraktivität bei der Beschaffung knapper Rohstoffe

Marchner, M., 31 Dec 2016, In : WING-Business. 49, 4, p. 19-22

Research output: Contribution to journalArticleResearch

Open Access

Substructuring of multibody systems for numerical transfer path analysis in internal combustion engines

Acri, A., Offner, G., Nijman, E. & Rejlek, J., 15 Oct 2016, In : Mechanical Systems and Signal Processing. 79, p. 254-270 270 p.

Research output: Contribution to journalArticleResearchpeer-review

Sulfur Poisoning of a NOx Storage Catalyst - A Comprehensive Modelling Approach

Hadl, K., Ratzberger, R., Eichlseder, H., Schüßler, M., Linares, W. & Pucher, H., 4 May 2016, In : SAE international journal of engines. 9, 3

Research output: Contribution to journalArticleResearchpeer-review

Technologiemanagement - Herausforderungen für Strategie und Management

Vorbach, S., Müller, C., Wipfler, H. & Höller, H., Oct 2016, In : WING-Business. 3/2016, p. 10-15 6 p.

Research output: Contribution to journalArticleResearch

Technologieorientierte Gründungen

Adametz, C., Wipfler, H. & Vorbach, S., Oct 2016, In : WING-Business. 3/2016, p. 29-31 3 p.

Research output: Contribution to journalArticleResearch

The Concept of the Entrepreneurial University Applied to Universities of Technology in Austria: Already Reality or a Vision of the Future?

Sperrer, M., Müller, C. & Soos, J., Oct 2016, In : Technology Innovation Management Review. 6, 10, p. 37-44 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Austria
university
Vienna
driver
innovation

The interaction between short-term heat-treatment and the formability of an Al-Mg-Si alloy regarding deep drawing processes

Machhammer, M. & Sommitsch, C., 19 Dec 2016, In : IOP Conference Series / Materials Science and Engineering. 159, 2001, p. 1-8 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Thermodynamically consistent continuum dislocation dynamics

Hochrainer, T., 2016, In : Journal of the mechanics and physics of solids. 88, p. 12–22

Research output: Contribution to journalArticleResearchpeer-review

continuums
Free energy
Tensors
Kinematics
Edge dislocations

Thermodynamic investigation of different natural gas combustion processes on the basis of a heavy-duty engine

Barnstedt, K. D., Ratzberger, R., Grabner, P. & Eichlseder, H., 2016, In : International journal of engine research. Vol. 17(1), p. 28-34

Research output: Contribution to journalArticleResearchpeer-review

Towards a Decision Making Algorithm for Automatic Lane Change Maneuver Considering Traffic Dynamics

Samiee, S., Azadi, S., Kazemi, R. & Eichberger, A., 2016, In : Promet - traffic & transportation. 28, 1

Research output: Contribution to journalArticleResearchpeer-review

Transient cycle simulation of domestic appliances and experimental validation

Heimel, M., Berger, E., Posch, S., Stupnik, A., Hopfgartner, J. W. & Almbauer, R., 2016, In : International journal of refrigeration. 69, p. 28-41

Research output: Contribution to journalArticleResearchpeer-review

Unified description of the softening behavior of beta-metastable and alpha+beta titanium alloys during hot deformation

Poletti, M. C., Germain, L., Warchomicka, F. G., Dikovits, M. & Mitsche, S., 2016, In : Materials science and engineering / A. 651, p. 280-290

Research output: Contribution to journalArticleResearchpeer-review

Variable Aufbaugeometrie für Nutzfahrzeuge: Nachhaltige Transportketten und -netzwerke

Fabian, J., 2016, Mobilität der Zukunft.

Research output: Contribution to specialist publicationArticleResearch

Variable body geometry for goods vehicles: Sustainable transport chains and networks

Fabian, J., 2016, Mobilität der Zukunft.

Research output: Contribution to specialist publicationArticleResearch

Versprödung von hochfestem Schweißgut beim Spannungsarmglühen

Cerjak, H-H., Caliskanoglu, O., Enzinger, N., Figner, G. & Pudar, M., Mar 2016, In : Schweissen und Schneiden <Düsseldorf, 1949 ->. 68, 3, p. 128 132 p.

Research output: Contribution to journalArticleResearch

Von Schreibmaschinen und Verbrennungsmotoren: Technologische Pfade und Sackgassen

Wipfler, H., Oct 2016, In : WING-Business. 3/2016, p. 16 - 20 4 p.

Research output: Contribution to journalArticleResearch

Was von technischen Einkäufern verlangt wird

Koch, V., Dec 2016, In : WING-Business. 49, 4, p. 23-25

Research output: Contribution to journalArticleResearch

2017

3D Modelling of Flash Formation in Linear Friction Welded 30CrNiMo8 Steel Chain

Effertz, P., Fuchs, F. & Enzinger, N., 21 Oct 2017, In : Metals. 7, 10, 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
Friction welding
Steel
Friction
Welding
Flash welding

4 SCENARIO’S VOOR INKOOP IN 2035: HOOGLERAAR SUPPLY CHAIN MANAGEMENT KIJKT NAAR DE TOEKOMST

Stek, K., 21 Dec 2017, In : Deal!. 2017, 8, p. 45-47 3 p.

Research output: Contribution to journalArticleResearch

Open Access
File
Purchasing
Scenarios
Supply chain management

A Car2X Sensor Model for Virtual Development of Automated Driving

Eichberger, A., Markovic, G., Magosi, Z. F., Rogic, B., Lex, C. & Samiee, S., 7 Sep 2017, International Journal of Advanced Robotic Systems, 14, 5 12 p.

Research output: Contribution to specialist publicationArticleResearchpeer-review

Open Access
Sensors
Adaptive cruise control
Communication
Computer simulation
Testing

A complete strategy for efficient and accurate multibody dynamics of flexible structures with large lap joints considering contact and friction

Pichler, F., Witteveen, W. & Fischer, P., 1 Aug 2017, In : Multibody System Dynamics. 40, 4, p. 407-436 30 p.

Research output: Contribution to journalArticleResearchpeer-review

Flexible Structure
Multibody Dynamics
Flexible structures
Component Mode Synthesis
Friction

Adaption of the LHC cold mass cooling system to the requirements of the Future Circular Collider (FCC)

Kotnig, C., Tavian, L. & Brenn, G., 30 Dec 2017, In : IOP Conference Series / Materials Science and Engineering. 278, 1, 012089.

Research output: Contribution to journalArticleResearchpeer-review

Colliding beam accelerators
Cooling systems
Cooling
Superfluid helium
Magnets

Adaptive Grinding Process (AGriPro) – Prevention of Thermal Damage using OPC UA Technique and in-Situ Metrology

Steffan, M., Haas, F., Pierer, A. & Gentzen, J., 30 Aug 2017, In : Journal of Manufacturing Science and Engineering. 139, 12

Research output: Contribution to journalArticleResearchpeer-review

Advanced Heat Transfer and Underhood Airflow Investigation with Focus on Continuously Variable Transmission (CVT) of Snowmobiles

Wurm, J., Hochenauer, C., Väisänen, E., Hurtig, E. & Mähönen, J., 16 Sep 2017, In : SAE International journal of commercial vehicles. 10, 2, 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Heat transfer
Pulleys
Snow
Cooling systems
Temperature

A holistic investigation of natural gas–diesel dual fuel combustion with dual direct injection for passenger car applications

Fasching, P., Sprenger, F. & Granitz, C., 10 Jul 2017, In : Automotive and Engine Technology.

Research output: Contribution to journalArticleResearchpeer-review

Air Starvation Induced Degradation in Polymer Electrolyte Fuel Cells

Bodner, M., Schenk, A., Salaberger, D., Rami, M., Hochenauer, C. & Hacker, V., 2 Feb 2017, In : Fuel Cells. 17, 1, p. 18-26 9 p.

Research output: Contribution to journalArticleResearchpeer-review

An investigation of the hydrodynamic similarity of single-spout fluidized beds using CFD-DEM simulations

Ebrahimi, M., Siegmann, E., Prieling, D., Glasser, B. J. & Khinast, J. G., Oct 2017, In : Advanced powder technology. 28, 10, p. 2465-2481

Research output: Contribution to journalArticleResearchpeer-review

A novel approach for dynamic gas conditioning for PEMFC stack testing

Kancsár, J., Striednig, M., Aldrian, D., Trattner, A., Klell, M., Kügele, C. & Jakubek, S., 30 Nov 2017, In : International Journal of Hydrogen Energy. 42, 48, p. 28898-28909 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Gas dynamics
gas dynamics
Proton exchange membrane fuel cells (PEMFC)
conditioning
fuel cells

Application of thermo-calc TCFE7 to high-alloyed mottled cast iron

Paar, A., Elizondo, L., Brandner, M., Trickl, T., Sonderegger, B., Beal, C. & Sommitsch, C., 2017, In : Materials Science Forum. 879, p. 1431-1436 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Cast iron
casts
Thermodynamics
iron
thermodynamics

Atom probe investigations on temper embrittlement and reversible temper embrittlement in S 690 steel weld metal

Cerjak, H-H., Mendez Martin, F. & Domakova, M., 7 Jul 2017, In : Science and technology of welding and joining. p. 1743-2936 9 p.

Research output: Contribution to journalArticleResearchpeer-review

embrittlement
Steel
Embrittlement
Welds
Metals

Autonomes Fahren: Mit der Zukunft lernen: Was kommt mit dem selbstfahrenden Auto auf uns zu? Wie werden Straßen und Stadtplanung in der Zukunft aussehen? Eine Annäherung an die Mobilität der Zukunft.

Pitour, M. & Eichberger, A., 1 Nov 2017, Volkswagen Magazin, November 2017 1 p.

Research output: Contribution to specialist publicationArticleResearch

Bring me: sustainable urban delivery service for the city of Graz

Trummer, W. & Hafner, N., 2017, In : Advanced Logistic Systems. 11 (2017), 1, p. 29 40 p.

Research output: Contribution to journalArticleResearchpeer-review

Business Model Innovation vs. Business Model Inertia: the Role of Disruptive Technologies

Vorbach, S., Wipfler, H. & Schimpf, S., Sep 2017, In : Berg- und hüttenmännische Monatshefte. 162, 9, p. 382–385

Research output: Contribution to journalArticleResearchpeer-review

Open Access

CFD analysis of a pusher type reheating furnace and the billet heating characteristic

Mayr, B., Prieler, R. J., Demuth, M., Moderer, L. & Hochenauer, C., 25 Mar 2017, In : Applied Thermal Engineering. 115, p. 986-994

Research output: Contribution to journalArticleResearchpeer-review

CFD modelling and performance increase of a pusher type reheating furance using oxy-fuel burners

Mayr-Mittermüller, B., Prieler, R. J., Demuth, M., Moderer, L. & Hochenauer, C., 2017, In : Energy Procedia. 120, p. 462-468 7 p.

Research output: Contribution to journalArticleResearchpeer-review

CFD modelling and performance increase of a pusher type reheating furnace using oxy-fuel burners

Mayr, B., Prieler, R., Demuth, M., Moderer, L. & Hochenauer, C., 2017, In : Energy Procedia. 120, p. 462-468 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Fuel burners
Computational fluid dynamics
Furnaces
Air
Productivity

CFD-simulation of effective carbon gasification strategies from high temperature SOFC Ni–YSZ cermet anodes

Schluckner, C., Subotić, V., Lawlor, V. & Hochenauer, C., 16 Feb 2017, In : International Journal of Hydrogen Energy. 42, 7, p. 4434 - 4448 15 p.

Research output: Contribution to journalArticleResearchpeer-review

Characterizing dislocation configurations and their evolution during creep of a new 12% Cr steel

Yadav, S. D., EI-Tahawy, M., Kalácska, S., Dománková, M., Canelo Yubero, D. & Poletti, M. C., Dec 2017, In : Materials characterization. 134, p. 387-397

Research output: Contribution to journalArticleResearchpeer-review

Steel
Convolution
Creep
steels
Transmission electron microscopy

CO/CO2 ratio in biomass char oxidation

Anca-Couce, A., Sommersacher, P., SHIEHNEJADHESAR, A., Mehrabian Bardar, R., Hochenauer, C. & Scharler, R., 2017, In : Energy Procedia. 120, p. 238-245

Research output: Contribution to journalArticleResearchpeer-review

Colliding drops as coalescing and fragmenting liquid springs

Planchette, C., Hinterbichler, H., Liu, M., Bothe, D. & Brenn, G., 2017, In : Journal of fluid mechanics. 814, p. 277-300

Research output: Contribution to journalArticleResearchpeer-review

Comparison between solid body and gas radiation in high temperature furnaces under different oxygen enrichments

Mayr-Mittermüller, B., Prieler, R. J., Demuth, M. & Hochenauer, C., 25 Dec 2017, In : Applied Thermal Engineering. 127, p. 679-688

Research output: Contribution to journalArticleResearchpeer-review

Comparison of numerical forced response predictions with experimental results obtained in a subsonic test turbine facility

Marn, A., Schönleitner, F., Mayr, M. & Heitmeir, F., 2017, In : Technische Mechanik. 37, 2-5, p. 139-150 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Turbines
Rotors
Engines
Turbomachine blades
Stators