Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

Filter
Poster
2008

JOIN A10: Punktschweißen metallisch beschichteter Feinbleche

Wagner, H., Basalka, H., Dörner, P., Vallant, R. & Galler, M., 2008.

Research output: Contribution to conferencePosterResearch

Knochenmineraldichte-Verteilung humaner Rippen

Darok, M., Dimai, H-P., Kirschbichler, S. & Tomasch, E., 2008.

Research output: Contribution to conferencePosterResearch

Locally resolved current and voltage distribution in straight flow channels compared to multiphase CFD simulation results

Parz, P., Hacker, V., Fink, C. & Prenninger, P., 2008.

Research output: Contribution to conferencePosterResearch

Microstructure modeling of the dynamic recystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718Plus

Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Pölt, P., Buchmayr, B. & Stockinger, M., 2008.

Research output: Contribution to conferencePosterResearch

Modelling of the fractal dimension in the primary atomization of high-speed liquid jets

Heidorn, D., Steiner, H. & Brenn, G., 2008.

Research output: Contribution to conferencePosterResearch

Objective Vehicle Dynamics Evaluation of Commercial Vehicles by Means of Model Based Parameter Identification

Prenninger, K., Hirschberg, W. & Volkwein, S., 2008.

Research output: Contribution to conferencePosterResearch

Phase defined density fluctuation maps of a resonant air-methane premixed flame using laser vibrometry

Giuliani, F., Lang, A., Leitgeb, T. & Woisetschläger, J., 2008.

Research output: Contribution to conferencePosterResearch

Research activities in the area of Friction Stir Welding and Processing

Weinberger, T., Khosa, S. U. & Enzinger, N., 2008.

Research output: Contribution to conferencePosterResearch

Retrospective accident investigation using information from court

Tomasch, E., Steffan, H. & Darok, M., 2008.

Research output: Contribution to conferencePosterResearch

Simulation of urea/water injection and evaporation in automotive SCR systems using AVL FIRE

Suzzi, D., Fink, C., Breitschaedel, B., Tatschl, R. & Brenn, G., 2008.

Research output: Contribution to conferencePosterResearch

Open Access
File

THERMODYNAMIC EVALUATION ON THE IMPACT OF A HOT GAS CLEANING SYSTEM FOR INTEGRATED GASIFICATION SYSTEMS

Schweiger, A., 2008.

Research output: Contribution to conferencePosterResearch

Wear behaviour of WC based tools in friction stir welding of steel

Weinberger, T., Führer, B., Khosa, S. U. & Enzinger, N., 2008.

Research output: Contribution to conferencePosterResearch

Compensation Of Thermal Errors On Machine Tools

Blaschun, T., Harreiter, H., Riemenschneider, I. C. & Eckerstorfer, E., 2007.

Research output: Contribution to conferencePosterResearch

Coordinate measuring arms – accuracy enhancements and proper accuracy interpretation

Blaschun, T., 2007.

Research output: Contribution to conferencePosterResearch

CRACK BEHAVIOUR OF THE NICKEL BASED ALLOY 80A DURING HOT FOMRING

Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007.

Research output: Contribution to conferencePosterResearch

Desulfurization of hot Biomass Product Gas with regenerative Adsorbents for SOFC

Schweiger, A., 2007.

Research output: Contribution to conferencePosterResearch

Development of Agreeableness: Which Predictors are most Important?

Hanfstingl, B., Riemenschneider, I. C. & Rollett, B., 2007.

Research output: Contribution to conferencePosterResearch

EBSD - Some experimental and some fundamental problems

Pölt, P., Mitsche, S. & Sommitsch, C., 2007.

Research output: Contribution to conferencePosterResearch

Entwicklung hochlegierter Metallpulverfülldraht zur Schweißung hochfester Stähle

Vallant, R., Ziegerhofer, J., Finster, B. & Schabl, G., 2007.

Research output: Contribution to conferencePosterResearch

Entwicklung und Untersuchung neuer KSP-Systeme für die Automobilindustrie

Ernst, W., Saberi, S., Vallant, R., Rauch, R., Stellnberger, K-H., Schabl, G., Schwamb, M. & Khelfallah, N., 2007.

Research output: Contribution to conferencePosterResearch

Evaluation of abatement measures and different scenarios for the PM10 concentration in Klagenfurt in 2020

Kurz, C., Sturm, P-J., Jost, S. & Öttl, D., 2007.

Research output: Contribution to conferencePosterResearch

Friction Welding of Eutectoid Steel Bars

Maalekian, M., 2007.

Research output: Contribution to conferencePosterResearch

On the retained strain during multipass hot deformation for the austenitic stainless steel 304 L

Candic, M., Tian, B., Kleber, S., Wießner, M. & Sommitsch, C., 2007.

Research output: Contribution to conferencePosterResearch

Optical Surface Analysis of Steel during Hot Compression: A Test to Determine Crack Initiation

Pschera, R., Sommitsch, C. & Winter, G., 2007.

Research output: Contribution to conferencePosterResearch

PM10 Source Apportionsments within the City of Klagenfurt, Austria

Kurz, C., Sturm, P-J., Vogelsang, S., Öttl, D. & Hafner, W., 2007.

Research output: Contribution to conferencePosterResearch

Sensitivity of urban and rural Ammonium-Nitrate Particulate Matter to Precursor Emissions in Southern Germany

Uhrner, U., Drechsler, S., Wolke, R., Wiedensohler, A. & Sturm, P-J., 2007.

Research output: Contribution to conferencePosterResearch

SPAS "Sound and Particle Absorbing System"

Rodler, J., 2007.

Research output: Contribution to conferencePosterResearch

The floating water bridge revisited

Fuchs, E. C., Woisetschläger, J., Gatterer, K., Maier, E. & Eisenkölbl, H., 2007.

Research output: Contribution to conferencePosterResearch

2006

A general approch to microstructural modelling of creep

Pein, C. & Kozeschnik, E., 2006.

Research output: Contribution to conferencePosterResearch

B6: Friction Stir Welding von Stahl und Stahl-Alu

Weinberger, T., 2006.

Research output: Contribution to conferencePosterResearch

B6: Friction Stir Welding von Stahl und Stahl-Alu

Weinberger, T., 2006.

Research output: Contribution to conferencePosterResearch

Creep fatigue of multi-part container during hot extrusion of copper - simulation and experimental comparison

Wlanis, T., Krumphals, F., Sommitsch, C. & Wieser, V., 2006.

Research output: Contribution to conferencePosterResearch

Die Wasserbrücke

Fuchs, E., Woisetschläger, J., Gatterer, K., Maier, E., Pecnik, R., Holler, G. & Eisenkölbl, H., 2006.

Research output: Contribution to conferencePosterResearch

EFTEM investigations on precipitates in a creep resistant 9-12% Cr stel

Sonderegger, B., Kothleitner, G., Rechberger, W. & Cerjak, H-H., 2006.

Research output: Contribution to conferencePosterResearch

Entwicklung und Untersuchung neuer KSP-Systeme für die Automobilindustrie

Ernst, W., Rauch, R., Schwamb, M., Vallant, R. & Schabl, G., 2006.

Research output: Contribution to conferencePosterResearch

In Situ Observation of Phase Transformations and Their Effects in 9-12%Cr Steels During Welding

Mayr, P., Palmer, T. A., Elmer, J. W. & Cerjak, H-H., 2006.

Research output: Contribution to conferencePosterResearch

Modellierung der duktilen Schädigung während der Warmumformung

Rüf, G., Sommitsch, C. & Buchmayr, B., 2006.

Research output: Contribution to conferencePosterResearch

Polygonprofile DIN 32711 und 32712

Frank, A. & Riemenschneider, I. C., 2006.

Research output: Contribution to conferencePosterResearch

Simulation of the precipitation kinetics during heat treatment and service of creep resistant martensitic 9-12% Cr steel

Holzer, I., Rajek, J., Kozeschnik, E. & Cerjak, H-H., 2006.

Research output: Contribution to conferencePosterResearch

The Influence of Peak Temperature and Deformation on Welding CCT Diagram of Eutectoid Carbon Steel

Maalekian, M., Lendinez, M. L., Kozeschnik, E., Brantner, H. P. & Cerjak, H-H., 2006.

Research output: Contribution to conferencePosterResearch

Thermal analysis of polymeric materials under machining conditons

Titarenko, O., Frank, A. & Riemenschneider, I. C., 2006.

Research output: Contribution to conferencePosterResearch

Weldability study of a boron alloyed high-temperature resistant 9% chromium steels

Mayr, P., 2006.

Research output: Contribution to conferencePosterResearch

2005

Blechprüfung

Sommitsch, C. & Buchmayr, B., 2005.

Research output: Contribution to conferencePosterResearch

Development of Hot Stamping Tool

Kolleck, R., Pfanner, S., Ganter, R. & Warnke, E. P., 2005.

Research output: Contribution to conferencePosterResearch

In situ tensile testing in the ESEM - a callenge for the engineer

Kaltmann, S., Raberger, R. M., Zankel, A. & Pölt, P., 2005.

Research output: Contribution to conferencePosterResearch