Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

Filter
Poster
2012

Microstructural Evolution of the Heat-affected Zone in 9%Cr Steels

Halici, D., Sonderegger, B., Mayr, P. & Reichmann, K., 2012.

Research output: Contribution to conferencePosterResearch

Microstructure and Strength Evolution in G-AlSi7Cu0.5Mg According to Different Heat Treatment Parameters

Krumphals, F., Poletti, M. C., Albu, M., STAUDER, B., Radis, R. & Sommitsch, C., 2012.

Research output: Contribution to conferencePosterResearch

Numerical and Experimental Investigations of the Structural Characteristics of Stator Core Stacks

Mair, M., Weilharter, B., Rainer, S., Ellermann, K. & Biro, O., 2012.

Research output: Contribution to conferencePosterResearch

On the modeling of austenite grain growth in micro-alloyed HS steel S700MC

Rahman, M. M., Albu, M. & Enzinger, N., 2012.

Research output: Contribution to conferencePosterResearch

OPERATION AND ACCURACY OF PARTICLE COUNTERS FOR ON-LINE CONDITION MONITORING OF HYDRAULIC OILS

Edler, J., 2012.

Research output: Contribution to conferencePosterResearch

Optimierung von Solar-Wärmepumpen anhand von dynamischen Anlagensimulationen

Lerch, W., Heinz, A., Thür, A. & Vukits, M., 2012.

Research output: Contribution to conferencePosterResearch

Projekt 2.2 - Pinstrukturen

Becirovic, A., Wittwer, L. & Enzinger, N., 2012.

Research output: Contribution to conferencePosterResearch

Real world emission measurement of different city bus concepts

Blassnegger, J., Kies, A. & Hausberger, S., 2012.

Research output: Contribution to conferencePosterResearch

Real-world vs Type-Approval CO2 Emissions of Light Duty Vehicles

Ntziachristos, L., Mellios, G., Hausberger, S., Keller, M. & Dilara, P., 2012.

Research output: Contribution to conferencePosterResearch

RPM-SYNCHRONOUS NONCIRCULAR GRINDING

Ablinger, R., 2012.

Research output: Contribution to conferencePosterResearch

Solid Oxide Fuel Cells under Thermal Cycling Conditions

Janics, A., 2012.

Research output: Contribution to conferencePosterResearch

Stationäres und dynamisches Betriebsverhalten einer Ammoniak/Wasser-Absorptionskälteanlage - Experimentelle Analyse und Simulationsmodellbildung

Hannl, D., Neyer, D., Rieberer, R. & Striecher, W., 2012.

Research output: Contribution to conferencePosterResearch

Why to design a Façade? – The Comet-Project MPPF

Grobbauer, M., Mach, T., Gosztonyi, S., Siegel, G., Wascher, H. & Kernler, U., 2012.

Research output: Contribution to conferencePosterResearch

2011

Aktive solarthermische Systeme in der Sanierung von Blockrandbebauungen der Gründerzeit

Mach, T., Heimrath, R. & Grünewald, S., 2011.

Research output: Contribution to conferencePosterResearch

A New Massless Leaf Spring Model and Its Application in the Simulation of Heavy Commercial Vehicles

Müller, G., Geiger, N., Waser, S., Hirschberg, W., Ille, T. & Zander, R., 2011.

Research output: Contribution to conferencePosterResearch

Break-up of suspension drops settling under gravity in a viscous fluid close to a vertical wall

Myłyk, A., Meile, W., Brenn, G. & Ekiel-Jeżewska, M. L., 2011.

Research output: Contribution to conferencePosterResearch

Construction and testing of a hydraulic cylinder for water hydraulics

Hochleitner, H. & Edler, J., 2011.

Research output: Contribution to conferencePosterResearch

Development of calculation methods for conceptual layout of automotive front and rear end crash systems

Frener, G., Hirz, M. & Harrich, A., 2011.

Research output: Contribution to conferencePosterResearch

Dynamics of multi-particle systems falling gravitationally in a viscous fluid

Myłyk, A., Meile, W., Brenn, G. & Ekiel-Jeżewska, M. L., 2011.

Research output: Contribution to conferencePosterResearch

Ein Simulationsmodell zur Abbildung dezentraler Wärmeübergabestationen - HeatBoxQuality

Heimrath, R. & Heinz, A., 2011.

Research output: Contribution to conferencePosterResearch

Electrically driven liquid bridges - a novel non equilibrium laboratory for polar liquids

Wexler, A. D., Holler, G., Fuchs, E. C. & Woisetschläger, J., 2011.

Research output: Contribution to conferencePosterResearch

Electromobility – A means to close the gap between sustainable alternative fuels and the energy demand in the EU 2030?

Buksnowitz, C., Brunner, C. & Hirschberg, W., 2011.

Research output: Contribution to conferencePosterResearch

Open Access
File

Estimation of the hydraulic conditions in piezo-pilot-valves

Hochleitner, H. & Edler, J., 2011.

Research output: Contribution to conferencePosterResearch

Evolution and break-up of suspension drops settling under gravity in a viscous fluid close to a vertical wall

Myłyk, A., Meile, W., Brenn, G. & Ekiel-Jeżewska, M. L., 2011.

Research output: Contribution to conferencePosterResearch

Formation of O/W Emulsions and Production of Microparticles for Pharmaceutical Applications

Kiss, N., Brenn, G., Scheler, S., Jennewein, H., Suzzi, D. & Khinast, J., 2011.

Research output: Contribution to conferencePosterResearch

Heißzugprüfmaschine BETA 250-5

Djuric, D., 2011.

Research output: Contribution to conferencePosterResearch

Open Access
File

Hot deformation and processing maps of a near beta Ti alloy

Dikovits, M., Poletti, M. C. & Warchomicka, F., 2011.

Research output: Contribution to conferencePosterResearch

Hot deformation of AA6082 containing fine intermetallic inclusions

Poletti, M. C. & Sommitsch, C., 2011.

Research output: Contribution to conferencePosterResearch

Open Access
File

Kombinierte Solarthermie / Wärmepumpe inkl. Abwasser-Wärmerückgewinnung (AWR)

Lerch, W., Heinz, A., Fink, C., Breidler, J. & Wagner, W., 2011.

Research output: Contribution to conferencePosterResearch

Komplexitätsmanagement im Front End of Innovation

Embst, S., 2011.

Research output: Contribution to conferencePosterResearch

Korrosionsprüfungen / Corrosion Testing

Kerschbaumer, K. G. & Vallant, R., 2011.

Research output: Contribution to conferencePosterResearch

Open Access
File

Lichtbogenschweißlabor

Kerschbaumer, K. G., Wittwer, L. & Vallant, R., 2011.

Research output: Contribution to conferencePosterResearch

Open Access
File

Lineares Reibschweißen von Kettengliedern

Mucic, K., Enzinger, N. & Fuchs, F., 2011.

Research output: Contribution to conferencePosterResearch

Mikrostrukturentwicklung beim Friction Stir Processing von Ti-6Al-4V

Ramskogler, C., Krumphals, A. & Sommitsch, C., 2011.

Research output: Contribution to conferencePosterResearch

Oxygenates – New (Bio)-Components for Diesel

Maly, M., Beichtbuchner, A., Nöst, M., Schutting, E., Härtl, M. & Wachtmeister, G., 2011.

Research output: Contribution to conferencePosterResearch

Physical Simulation of Hot Ductility of Continuous Cast Steels with in-situ solidified Hot Tensile Test

Djuric, D., Sommitsch, C., Zamberger, S. & Stiefler, F., 2011.

Research output: Contribution to conferencePosterResearch

Open Access
File
Open Access
File

Potentialanalyse von aktiven Systemen für die Anwendung in Fahrerassistenzsystemen

Niederkofler, H., Lex, C., Eichberger, A. & Rojas Rojas, A. E., 2011.

Research output: Contribution to conferencePosterResearch

Open Access
File

ThermoPump- Thermisch angetriebene Lösungsmittelpumpe für Ammoniak/Wasser-Absorptionswärmepumpen kleiner Leistung

Rieberer, R., Zotter, G. & Moser, H., 2011.

Research output: Contribution to conferencePosterResearch

Vorrichtung zur Prüfung der Anfälligkeit zur H-Versprödung / Device for testing the susceptibility to H-embrittlement

Kuduzovic, A., Sommitsch, C. & Kienreich, R., 2011.

Research output: Contribution to conferencePosterResearch

2010

Calculation of phase boundary energies and application in multicomponent steels

Sonderegger, B., Hacksteiner, M., Mendez Martin, F., Holzer, I. & Kozeschnik, E., 2010.

Research output: Contribution to conferencePosterResearch

Creep strength and microstructural evolution of 9-12% Cr hear resistant steels during creep exposure at 600°C and 650°C

Mendez Martin, F., Panait, C. G., Bendick, W., Albu, M., Sonderegger, B., Sommitsch, C., Gourgues-Lorenzon, A-F., Besson, J. & Fuchsmann, A., 2010.

Research output: Contribution to conferencePosterResearch

Ermittlung des optimalen Abstandes zwischen der Glasscheibe und dem Absorber eines Flachkollektors

Altenburger, F., 2010.

Research output: Contribution to conferencePosterResearch

Ermittlung von angemessenen Vorwärmtemperaturen beim Schweißen von ferritisch/bainitischen TM-Stählen

Kapl, S., Rauch, R., Suleiman, S., Vallant, R. & Enzinger, N., 2010.

Research output: Contribution to conferencePosterResearch

Ermittlung von diffusiblem Wasserstoff in hochfestem Schweißgut

Kapl, S., Zwettler, F., Rauch, R., Duchaczek, H., Enzinger, N. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

Fixed-Bed Methanation of biogeneous SynGas, Ideas for the decentralized approch

Kienberger, T., 2010.

Research output: Contribution to conferencePosterResearch