Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

Filter
Poster
2013

IT-Systemarchitektur und IT-Service Design

Vorraber, W. & Lichtenegger, G. C., 2013.

Research output: Contribution to conferencePosterResearch

Kleben von Schneidkeramik-Sägezähnen auf ein Stahlsägeblatt / Grundlagenuntersuchungen und Potential

Moser, F., Vallant, R. & Hampel, S., 2013.

Research output: Contribution to conferencePosterResearch

Open Access
File

Knowledge-based Engineering zur Grobplanung und Gestaltung automatisierter Hochregallager

Ortner-Pichler, A., 2013.

Research output: Contribution to conferencePosterResearch

Open Access
File

Lichtbogenspritzen von Metallschichten für den Verschleiß- und Korrosionsschutz

Jesse, M., Schröttner, H. & Vallant, R., 2013.

Research output: Contribution to conferencePosterResearch

Open Access
File

Merkmalsanalyse von Shuttlesystemen: Ein funktionaler Überblick

Schadler, M. & Dober, S., 24 Apr 2013.

Research output: Contribution to conferencePosterResearch

Multi-Linear State Space Model Identification for Large Scale Building Systems

Michailidis, I. & Pichler, M., 2013.

Research output: Contribution to conferencePosterResearch

Open Access
File

Porduktionsplanung und -optimierung

Lichtenegger, G. C., 2013.

Research output: Contribution to conferencePosterResearch

Safe small Electric Vehicles through advanced simulation methodologies

Luttenberger, P., 2013.

Research output: Contribution to conferencePosterResearch

Simulationstechnische Bewertung innovativer Solar-Wärmepumpen-Kombianlagen

Lerch, W., Heinz, A. & Heimrath, R., 2013.

Research output: Contribution to conferencePosterResearch

Study of failure behaviour of a titanium aluminide alloy during hot deformation

Halici, D., Prodinger, D., Poletti, M. C., Stockinger, M. & Huber, D., 2013.

Research output: Contribution to conferencePosterResearch

Szenarienbasierte Fabriksplanung

Unzeitig, W., 2013.

Research output: Contribution to conferencePosterResearch

Technisch-ökonomischer Vergleich von Solarthermie-Wärmepumpen und PV-Wärmepumpen-Kombianlagen

Heimrath, R., Lerch, W. & Heinz, A., 2013.

Research output: Contribution to conferencePosterResearch

Test bed for hydrostatic bearing gap

Mörwald, G., Edler, J. & Hochleitner, H., 2013.

Research output: Contribution to conferencePosterResearch

Open Access
File

The instrumented Charpy impact test for a detailed investigation of the fracture behaviour

Schuler, M., 2013.

Research output: Contribution to conferencePosterResearch

Transferring human factors knowledge from aviation to development of a warning system for landslide

Koglbauer, I., Hohenberger, G. & Steger, C., 2013.

Research output: Contribution to conferencePosterResearch

Wandlungsfähigkeit technologieorientierter Unternehmen

Wipfler, H., 2013.

Research output: Contribution to conferencePosterResearch

Zur Integration von Produkt-und Prozessinnovation

Schnöll, H. P., 2013.

Research output: Contribution to conferencePosterResearch

2014

Ab initio flight training in a network of simulators: chances and challenges

Koglbauer, I. V., Braunstingl, R., Riesel, M. & Braunstingl, D., 2014.

Research output: Contribution to conferencePosterResearch

Open Access
File

ADVANCED ODOUR DISPERSION MODELLING IN A NEW ENVIRONMENTAL INFORMATION SYSTEM

Uhrner, U., Grosso, G. & Öttl, D., 2014.

Research output: Contribution to conferencePosterResearch

Open Access
File

A full structural mechanical description of beam elements for rotors in electrical machines

Poganski, J., Mair, M. & Ellermann, K., 2014.

Research output: Contribution to conferencePosterResearch

Agile Manufacturing - A Model for Business Operations in Volatile Times

Rabitsch, C., 2014.

Research output: Contribution to conferencePosterResearch

An embedded power distribution system for sport aircraft

Grubmüller, E., Braunstingl, R., Bösch, W., Koglbauer, I. & Fruehwirth, K., 2014.

Research output: Contribution to conferencePosterResearch

Assistance systems in manufacturing - Another step towards industry 4.0

Kleindienst, M. & Zeininger, H., 2014.

Research output: Contribution to conferencePosterResearch

Beschreibung der Subkornmissorientierung in der Nähe von harten Teilchen von plastisch verformten Metallen

Loidolt, P., Ulz, M. H., Mitter, W. & Sommitsch, C., 2014.

Research output: Contribution to conferencePosterResearch

Crash Safety of Batteries - Test based process for finite element modelling

Leitgeb, W. & Ellersdorfer, C., 2014.

Research output: Contribution to conferencePosterResearch

Energy optimized machine tools and processes with advanced measuring technology and evaluation

Redecker, M. E., Haas, F. & Schmiedhofer, B., 2014.

Research output: Contribution to conferencePosterResearch

Open Access
File

Engine Temperature Model for Air-Cooled 2-Stroke Engines

Grassberger, H., 2014.

Research output: Contribution to conferencePosterResearch

Open Access
File

Evaluation of Angular Sensor Systems for Rotor Position Sensing of Automotive Electric Drives

Gächter, J., Fabian, J., Hirz, M., Schmidhofer, A. & Lanzenberger, H., 2014.

Research output: Contribution to conferencePosterResearch

Experimental investigation and numerical simulation of resistance spot welding for residual stress evaluation of DP1000 steel

Pakkanen, J., Kicin, M. & Vallant, R., 2014.

Research output: Contribution to conferencePosterResearch

Experimental Investigation of the Noise Generation and Propagation for a Turning Mid Turbine Frame

Faustmann, C., Zerobin, S. & Heitmeir, F., 2014.

Research output: Contribution to conferencePosterResearch

FabLab - A Movement in the Making

Friessnig, M. H., 2014.

Research output: Contribution to conferencePosterResearch

Friction Welding of TZM Components

Reheis, N., Tabernig, B., Kestler, H., Sigl, L. S., de Pretis, D. & Enzinger, N., 2014.

Research output: Contribution to conferencePosterResearch

Future Measures for Fuel Savings of Heavy-Duty Vehicles

Kies, A., Rexeis, M., Hausberger, S., Dünnebeil, F., Heuer, C. & Lambrecht, U., 2014.

Research output: Contribution to conferencePosterResearch

Future Trends of Advanced Power Electronics and Control Systems for Electric Vehicles

Fabian, J., Gächter, J. & Hirz, M., 2014.

Research output: Contribution to conferencePosterResearch

IBL Lernfabrik - Vorstellung des Konzepts

Kleindienst, M., 2014.

Research output: Contribution to conferencePosterResearch

Industrie 4.0 - The future of production

Pointner, A., 2014.

Research output: Contribution to conferencePosterResearch

Influence of nickel on the mechanical properties of a creep resistant CB2 flux cored wire weld metal

Baumgartner, S., Schuler, M., Schnitzer, R. & Enzinger, N., 2014.

Research output: Contribution to conferencePosterResearch

Inter-regional Air Quality Assessment – bridging the gap between regional and kerbside PM

Uhrner, U., 2014.

Research output: Contribution to conferencePosterResearch

Open Access
File

Investigation of friction behavior in modern combustion engines

Wagner, A., Grabner, P., Eichlseder, H. & Wichtl, R., 2014.

Research output: Contribution to conferencePosterResearch

Investigation on Noise Generation and Propagation for Different Vane-Vane Positions in a Two-Stage Two-Spool Test Turbine

Bauinger, S., Faustmann, C. & Heitmeir, F., 2014.

Research output: Contribution to conferencePosterResearchpeer-review

Know-how and process development for components used in (A)USC power plants

Lochbichler, C., Füreder-Kitzmüller, F., Zeiler, G., Paul, S., Klarner, J., Vogl, T., Baumgartner, S., Schnitzer, R., Hanus, R., Schmitz-Niederau, M., Kreuzer-Zagar, D., Schrammhauser, S., Trenkmann, U., Schuler, M. & Enzinger, N., 2014.

Research output: Contribution to conferencePosterResearch

LeanLab - Hands-on training in the Learning Factory

Kleindienst, M., 2014.

Research output: Contribution to conferencePosterResearch

Microstructure for an optimized creep rupture strength of high Cr steels

Plesiutschnig, E., Sommitsch, C., Beal, C., Mitsche, S., Paul, S. & Zeiler, G., 2014.

Research output: Contribution to conferencePosterResearch

Numerical investigation regarding contact modeling for evaluating the modal characteristics of a low pressure turbine rotor

Justl, M., Traußnig, L. M., Schönleitner, F., Marn, A. & Heitmeir, F., 2014.

Research output: Contribution to conferencePosterResearch

Product Innovation Project - Development of working prototypes

Pointner, A., 2014.

Research output: Contribution to conferencePosterResearch

Production technology requirements with respect to agile manufacturing

Friessnig, M. H. & Oswald, P., 2014.

Research output: Contribution to conferencePosterResearch

Ramp-Up Management in Automotive Industry - Time-to-market oriented

Pointner, A., 2014.

Research output: Contribution to conferencePosterResearch