Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

Filter
Poster
2011

Vorrichtung zur Prüfung der Anfälligkeit zur H-Versprödung / Device for testing the susceptibility to H-embrittlement

Kuduzovic, A., Sommitsch, C. & Kienreich, R., 2011.

Research output: Contribution to conferencePosterResearch

2012

Auxiliary energy saving potential of solar thermal systems with predictive controls

Pichler, M., Lerch, W., Heinz, A., Heimrath, R. & Schranzhofer, H., 2012.

Research output: Contribution to conferencePosterResearch

Open Access
File

Comparison of LabVIEW and MATLAB for Scientific Research

TAŠNER, T., LOVREC, D. & Edler, J., 2012.

Research output: Contribution to conferencePosterResearch

Design and Verification of a Longitudinal Vehicle Simulation with a Thermal Model

Trattner, A., Lehner, R. & Girstmair, J., 2012.

Research output: Contribution to conferencePosterResearchpeer-review

Einfluss der FSW-Schweißparameter auf die Mikrostruktur von Stahl DIN 1.4301

Pfeiffer, C., Weinberger, T. & Enzinger, N., 2012.

Research output: Contribution to conferencePosterResearch

Flugzeug auf Kollisionskurs – Reaktionen im Simulatorcockpit

Koglbauer, I., Haberkorn, T., Braunstingl, R. & Prehofer, B-A., 2012.

Research output: Contribution to conferencePosterResearch

FTG

Kraus, H., 2012.

Research output: Contribution to conferencePosterResearch

Impacts on the mechanical properties of aluminum base material due to pin welding

Wittwer, L., Enzinger, N. & Sommitsch, C., 2012.

Research output: Contribution to conferencePosterResearch

Open Access
File

Innovativer Drehmomentsensor als Schlüsselkomponente zur „Intelligenten Produktion“

Haas, F. & Brandl, M., 2012.

Research output: Contribution to conferencePosterResearch

Investigation of Creep Damage in Martensitic 9‐12% Cr Steel Crosswelds using Synchrotron X‐ray Micro‐tomography

Schlacher, C., Mayr, P., Gupta, C., Toda, H., Usegi, K., Suzuki, Y. & Sommitsch, C., 2012.

Research output: Contribution to conferencePosterResearch

KNOWLEDGE-BASED METHODS FOR EFFICIENT MATERIAL HANDLING DESIGN

Jodin, D. & Landschützer, C., 2012.

Research output: Contribution to conferencePosterResearch

Lastumlagerung von Hochspannungsisolatorketten

Landschützer, C. & Fritz, M., 2012.

Research output: Contribution to conferencePosterResearch

METHODS FOR CONTACTLESS TEMPERATURE MEASUREMENT ON BALL SCREWS

Edler, J., 2012.

Research output: Contribution to conferencePosterResearch

Microstructural Evolution of the Heat-affected Zone in 9%Cr Steels

Halici, D., Sonderegger, B., Mayr, P. & Reichmann, K., 2012.

Research output: Contribution to conferencePosterResearch

Microstructural Evolution of the Heat-affected Zone in 9%Cr Steels

Halici, D., Sonderegger, B., Mayr, P. & Reichmann, K., 2012.

Research output: Contribution to conferencePosterResearch

Microstructure and Strength Evolution in G-AlSi7Cu0.5Mg According to Different Heat Treatment Parameters

Krumphals, F., Poletti, M. C., Albu, M., STAUDER, B., Radis, R. & Sommitsch, C., 2012.

Research output: Contribution to conferencePosterResearch

Numerical and Experimental Investigations of the Structural Characteristics of Stator Core Stacks

Mair, M., Weilharter, B., Rainer, S., Ellermann, K. & Biro, O., 2012.

Research output: Contribution to conferencePosterResearch

On the modeling of austenite grain growth in micro-alloyed HS steel S700MC

Rahman, M. M., Albu, M. & Enzinger, N., 2012.

Research output: Contribution to conferencePosterResearch

OPERATION AND ACCURACY OF PARTICLE COUNTERS FOR ON-LINE CONDITION MONITORING OF HYDRAULIC OILS

Edler, J., 2012.

Research output: Contribution to conferencePosterResearch

Optimierung von Solar-Wärmepumpen anhand von dynamischen Anlagensimulationen

Lerch, W., Heinz, A., Thür, A. & Vukits, M., 2012.

Research output: Contribution to conferencePosterResearch

Projekt 2.2 - Pinstrukturen

Becirovic, A., Wittwer, L. & Enzinger, N., 2012.

Research output: Contribution to conferencePosterResearch

Real world emission measurement of different city bus concepts

Blassnegger, J., Kies, A. & Hausberger, S., 2012.

Research output: Contribution to conferencePosterResearch

Real-world vs Type-Approval CO2 Emissions of Light Duty Vehicles

Ntziachristos, L., Mellios, G., Hausberger, S., Keller, M. & Dilara, P., 2012.

Research output: Contribution to conferencePosterResearch

RPM-SYNCHRONOUS NONCIRCULAR GRINDING

Ablinger, R., 2012.

Research output: Contribution to conferencePosterResearch

Solid Oxide Fuel Cells under Thermal Cycling Conditions

Janics, A., 2012.

Research output: Contribution to conferencePosterResearch

Stationäres und dynamisches Betriebsverhalten einer Ammoniak/Wasser-Absorptionskälteanlage - Experimentelle Analyse und Simulationsmodellbildung

Hannl, D., Neyer, D., Rieberer, R. & Striecher, W., 2012.

Research output: Contribution to conferencePosterResearch

Why to design a Façade? – The Comet-Project MPPF

Grobbauer, M., Mach, T., Gosztonyi, S., Siegel, G., Wascher, H. & Kernler, U., 2012.

Research output: Contribution to conferencePosterResearch

2013

A set of physical and chemical properties for biochar characterization in terms of soil application

Dieguez-Alonso, A., Anca-Couce, A., Garcia-Rueda, A., Zobel, N. & Behrendt, F., 2013.

Research output: Contribution to conferencePosterResearchpeer-review

Assessing the Surface Cracking Susceptibility during Continuous Casting of in-situ Melted and Solidified Steels

Caliskanoglu, O., Ilie, S., Beal, C. & Sommitsch, C., 2013.

Research output: Contribution to conferencePosterResearch

Business Modellierung und Simulation

Neubacher, D., 2013.

Research output: Contribution to conferencePosterResearch

Calculation of Evaporation Rate in Drying Section of Fixed-Bed Gasifiers

Jalili, M., Anca-Couce, A., Zobel, N. & Behrendt, F., 2013.

Research output: Contribution to conferencePosterResearchpeer-review

Customers’ Motivation to Cooperate with Suppliers in Business-to-Business Relationships

Koch, V. & Zunk, B. M., 2013.

Research output: Contribution to conferencePosterResearch

Development of an electrical method for including mesoscale state transitions in polar liquids

Wexler, A. D., Drusova, S., Fuchs, E. C. & Woisetschläger, J., 2013.

Research output: Contribution to conferencePosterResearch

Die Lernfabrik - Hands-on Training in der Fabrik im Hörsaal

Kleindienst, M., 2013.

Research output: Contribution to conferencePosterResearch

Dual Fuel Concepts for Mobile Application

Grabner, P. & Eichlseder, H., 2013.

Research output: Contribution to conferencePosterResearch

Elektronenstrahlschweißen dickwandiger Gussbauteile aus CB2 und Alloy 625

Wiednig, C. A., Enzinger, N., Beal, C. & Lochbichler, C., 2013.

Research output: Contribution to conferencePosterResearch

Open Access
File

E-Mobility as System Innovation - Oppertunity for different industries?

Pointner, A., 2013.

Research output: Contribution to conferencePosterResearch

E-procurement Usage in the Construction Industry: Adoption Rate, Benefits and Barriers

Marchner, M. & Zunk, B. M., 2013.

Research output: Contribution to conferencePosterResearch

Evaluation of combined solar thermal heat pump systems using dynamic system simulations

Lerch, W., Heinz, A. & Heimrath, R., 2013.

Research output: Contribution to conferencePosterResearch

Factors to Predict Collaboration in “Student-University-Industry – Triads”: Findings from Austria

Zunk, B. M., Manninger, M., Kerschenbauer, J. & Bauer, U., 2013.

Research output: Contribution to conferencePosterResearch

Flexibility of Business Models

Müller, C., 2013.

Research output: Contribution to conferencePosterResearch

Holistic management control approach for post- incubation support of high- technology start- ups

Kerschenbauer, J. & Bauer, U., 2013.

Research output: Contribution to conferencePosterResearch

How to explain the motivation in collaborations between students, university representatives and industry partners?

Reinisch, M., Zunk, B. M., Kerschenbauer, J. & Manninger, M., 2013.

Research output: Contribution to conferencePosterResearch

How to implement product lifecycle management tools successfully? Top 10 human factors and their managerial implications

Soos, J., Uitz, I. & Zunk, B. M., 2013.

Research output: Contribution to conferencePosterResearch

Innovationsfähigkeit und organisationale Ambidexterität – Empirische Untersuchung der Photovoltaik-Industrie

Marko, W. A., 2013.

Research output: Contribution to conferencePosterResearch

Investigation of a Standard Lawn Mower Engine in Real World Operation

Edtmayer, H., 2013.

Research output: Contribution to conferencePosterResearch

Open Access
File