Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2020

Filter
Poster
2018

Modelling Material Flow in Friction Riveting of Polymeric Materials

Pina Cipriano, G., dos Santos, J. F., Vilaça, P. & Amancio-Filho, S. T., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Riveting
Rivets
Friction
Polymers
Plastic deformation

Modelling the hot deformation behaviour of a Ti5553 alloy

Buzolin, R. H., Krumphals, F., Krumphals, A., Lasnik, M., Wang, P., Kumar, S. & Poletti, M. C., 2018.

Research output: Contribution to conferencePosterResearch

Multi-Objective System Design Synthesis for Electric Powertrain Development

Hofstetter, M., 14 Jun 2018.

Research output: Contribution to conferencePosterResearchpeer-review

New ropeway system for Smart Urban Mobility & Logistics in the City of Graz

Trummer, W., Hafner, N., Hofer, K., Fellendorf, M., Fallast, K. & Huber, G., 17 Apr 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Logistics
Cables
Railroad cars
Environmental impact

On the feasibility of Friction Surfacing as an Additive Manufacturing technique

Belei Feliciano, C. A., 21 Sep 2018.

Research output: Contribution to conferencePosterResearchpeer-review

3D printers
Hard facing
Friction
Deposition rates
Fusion reactions

PoRIS - Towards Transnational River Information Systems to Foster Public Safety and Commercial Logistics

Vorraber, W., Brugger, J. B., Schöggl, F., Lichtenegger, G. C., Vössner, S., Reindl-Krauskopf, S., Salimi, F., Kaplans, M., Strondl, R., Terlecki, A., Bierbaumer, R., Harnisch, C., Wegscheider, H-P., Sattler, M., Simon, S. & Kaufmann, M., 25 Jun 2018.

Research output: Contribution to conferencePosterResearch

SmartScout - Fostering PPDR Mission Management by Integrating Different Sensor Platforms

Mösl, B., Vorraber, W., Brugger, J. B., Neubacher, D., Mostegel, K., Prüller, R., Rautz, K., Stadlmeier, S., Perko, R., Schnabel, T., Almer, A., Aichhorn, K. & Vössner, S., 25 Jun 2018.

Research output: Contribution to conferencePosterResearch

SOFC characterisation based on using an algebraic fractional-order identification approach

Dolenc, B., Nusev, G., Subotić, V., Hochenauer, C., Gehring, N., Juricic, D. & Boskoski, P., 4 Jul 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Thermal Analysis for the Development of a Solar Thermal Activated Facade Element

Schober, H. & Brandl, D., 4 Oct 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Transformationsplanung urbaner Energiesysteme: EnergySimCity

Mach, T., Schweiger, G., Nageler, P. J., Brandl, D., Heimrath, R., Fink, C., Schranzhofer, H., Leusbrock, I. & Hochenauer, C., 14 Jun 2018.

Research output: Contribution to conferencePosterResearch

Using stable isotopes for lube oil consumption measurement on internal combustion engines

Rossegger, B., Schneider, M., Leis, A., Engelmayer, M. & Wimmer, A., 22 Nov 2018.

Research output: Contribution to conferencePosterResearchpeer-review

WASTE HEAT RECOVERY FOR COMMERCIAL VEHICLES: BASICS AND THE MAIN CHALLENGES

Lang, M. & Kirchberger, R., 31 May 2018.

Research output: Contribution to conferencePosterResearchpeer-review

2019

3D-Druck von Natriumacetat-Trihydrat: produktiv, einfach, ressourcenschonend

Brillinger, M., Fuchs, C., Haas, F. & Pichlkastner, C., 12 Sep 2019.

Research output: Contribution to conferencePosterResearchpeer-review

4-D Printing of NiTi Shape Memory Alloys

Paiotti Marcondes Guimaraes, R., Pixner, F., Trimmel, G. & Amancio-Filho, S. T., 26 Sep 2019.

Research output: Contribution to conferencePosterResearch

Open Access
File
Shape memory effect
Printing
Titanium
Nickel
3D printers

Adaptive Smart Production: Cognitive aspects in low volume high flexibility e-powertrain production

Brillinger, M., Haas, F., Hick, H. & Weinzerl, M., 26 Feb 2019.

Research output: Contribution to conferencePosterResearch

3D printers
Polymers
Metals
Aircraft
Substrates

Advantages of Ultrasonic 5-axis Milling of Complex Flow Field Bipolar Plates for PEMFC

Eisele, P. S., Zopf, P., Penga, Z. & Haas, F., 10 Oct 2019.

Research output: Contribution to conferencePosterResearch

Ammonia2Power project - Ammonia gas recovery via VMD for fuel cells

Guillen-Burrieza, E., Stöckl, B., Hochenauer, C., Tahir, A. J., Platzer, C. & Brunner, C., 6 Jun 2019.

Research output: Contribution to conferencePosterResearchpeer-review

Reliability analysis
Dissection
Chaos theory
Design of experiments
Polynomials

Augmented Reality und IoT im Industriebereich: Umsetzung ausgewählter Anwendungsszenarien in einem Sondermaschinenbau-Unternehmen

Berer, S. & Schadler, M., 22 May 2019, p. 201-205. 1 p.

Research output: Contribution to conferencePosterResearch

Open Access

AXIALFLUSSMASCHINE: Alternatives Motorkonzept verbessert Umweltbilanz von E-Fahrzeugen

Bloder, M., Brillinger, M., Bader, M., Ratasich, M., Kopsch, P. & Hick, H., 18 Jun 2019.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access

CP-FE modelling and experimental investigation of gradient structured Al wires

Pourbashiri, M., Poletti, M. C., Sedighi, M. & Sommitsch, C., 26 Sep 2019.

Research output: Contribution to conferencePosterResearchpeer-review

Demand-based coupling of the scales: An application to the finite temperature CADD method

Wurm, P. & Ulz, M. H., 26 Sep 2019.

Research output: Contribution to conferencePosterResearch

Digitalisierung eines Milkruns

Eder, M. J., Hulla, M. U., Gotthardt, S. J., Karre, H. D. & Ramsauer, C., 22 May 2019, p. 193-194.

Research output: Contribution to conferencePosterResearch

Open Access

Drehzahlsynchron-Schleifprozess: Prozesscharakteristika und Vergleiche zu konventionellem Schleifen

Spenger, T. & Haas, F., 19 Nov 2019.

Research output: Contribution to conferencePosterResearch

Friction Riveting – Single-phase Process Variant

Pina Cipriano, G., Vilaça, P. & Amancio-Filho, S. T., 2019.

Research output: Contribution to conferencePosterResearchpeer-review

Riveting
Rivets
Friction
Joining
Plastic deformation

Hot deformation behavior of a precipitate free Ni-based superalloy

Godavarthy Anantha Venkata, R. K. P., Lizzi, F., Schaden, G., Stanojevic, A., Stockinger, M., Sommadossi, S. & Poletti, M. C., 6 Aug 2019.

Research output: Contribution to conferencePosterResearchpeer-review

Hot torsion tests of 100Cr6 steel to simulate the cross-roll piercing process

Fauland, G., Beal, C., Sommitsch, C., Nunner, G. & Winter, G., 26 Sep 2019.

Research output: Contribution to conferencePosterResearch

Implementierung eines Cyber-physischen Systems in der Intralogistik: IoT in der Fördertechnik

Mörth, O., Emmanouilidis, C., Hafner, N. & Schadler, M., 22 May 2019, p. 207-211. 1 p.

Research output: Contribution to conferencePosterResearch

Open Access

Integrated contactless temperature-control for Electron Beam Additive Manufacturing

Theuermann, D., Pixner, F. & Enzinger, N., 26 Sep 2019.

Research output: Contribution to conferencePosterResearch

Integrating recent developments in road transport in HBEFA 4.1

Notter, B., Hausberger, S., Rexeis, M., Dippold, M., Matzer, C. U., Lipp, S., Weller, K., Weller, K., Röck, M. J. & Schwingshackl, M., 2019.

Research output: Contribution to conferencePosterResearch

LEISTBARE E-MOBILITÄT: Kostensenkung durch neue Ansätze in der Produktion

Brillinger, M., Abdul Hadi, M., Kassem, A., Haas, F. & Weinzerl, M., 18 Jun 2019.

Research output: Contribution to conferencePosterResearchpeer-review

LOW-COST E-MOBILITY: Cost Reduction Through New Approaches in Production

Brillinger, M., Abdul Hadi, M., Haas, F. & Weinzerl, M., 16 May 2019.

Research output: Contribution to conferencePosterResearch

Multi scale topography in titanium alloys by electron beam technique: influence on the tissue adhesion and bacterial contamination

Warchomicka, F. G., Ramskogler, C., Ferraris, S., Cochis, A., Rimondini, L., Weinberg, A., Spriano, S. & Sommitsch, C., 8 May 2019, p. 1. 1 p.

Research output: Contribution to conferencePosterResearch

titanium alloys
topography
contamination
adhesion
electron beams

Optimierung der Kühlschmierstoff-Zuführung an eine CBN-Schleifscheibe mittels 3D-Druck

Zopf, P., Höller, C., Potocnik, C., Schwemberger, P., Spenger, T., Steffan, M. & Haas, F., 13 Feb 2019.

Research output: Contribution to conferencePosterResearchpeer-review

Overview and Work Packages of the EU Project “PERISCOPE”

Zunk, B. M., 2019.

Research output: Contribution to conferencePosterResearch

PHABLABS 4.0 – Motivating young students to choose a STEM career via hands-on workshop experiences

Ramsauer, C., 17 Oct 2019.

Research output: Contribution to conferencePosterResearchpeer-review

Preliminary study on the AddJoining process over additively-manufactured metallic parts

Belei Feliciano, C. A., Meier, B., Falck, R. & Amancio-Filho, S. T., 26 Sep 2019.

Research output: Contribution to conferencePosterResearch

3D printers
Joining
Machining
Polymers
Metals

Unterstützende und ergänzende Modellierung im Rahmen des Smart Air Quality Networks

Uhrner, U., Werhahn, J., Reifeltshammer, R. J., Philipp, A., Kunde, R., Schäfer, K. & Emeis, S., 2019. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Welche Rolle kann Dezentrale Kühlung für Gebäude in Österreich Spielen? Ergebnisse des COOLSKIN Projektes

Rennhofer, M., Schlager, T., Selke, T., Heinz, A., Brandl, D., Zimmerberger, S. & Mach, T., 2019.

Research output: Contribution to conferencePosterResearch