Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

Filter
Paper
2018

Repowering existing HPP infrastructure for the next 70 years: Retrofit of the St. Anton Hydro Power Plant with increased power output and flexibility

Höller-Litzlhammer, S., Jaberg, H., Pinamonti, P., Frasnelli, P. & Dengg, A., 17 Oct 2018, p. Paper 86.

Research output: Contribution to conferencePaperResearchpeer-review

Schwungradspeicher für Elektrofahrzeug-Schnellladestationen

Buchroithner, A., Haidl, P., Wegleiter, H., Schweighofer, B. & Bader, M., Feb 2018.

Research output: Contribution to conferencePaperResearch

Simulation Assisted Safety Impact Analyses for Signalized Urban Intersections

Haberl, M., Fellendorf, M., Kolk, H. & Tomasch, E., 16 Apr 2018.

Research output: Contribution to conferencePaperResearchpeer-review

Simulation of a Selected Real World Car to Bicyclist Accident using a Detailed Human Body Model

Klug, C., Feist, F. & Wimmer, P., 12 Sep 2018, p. 182. 183 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access

Simultaneous measurements of velocity and density of transient flows using high-speed camera technique

Gürtler, J., Ramos Ruiz, A. E., Kuschmierz, R., Greiffenhagen, F., Woisetschläger, J. & Czarske, J., 2018.

Research output: Contribution to conferencePaperResearchpeer-review

Steady CFD Simulation of a High Pressure Turbine Rotor with Hub and Shroud Purge Flow

Sanz, W., Zerobin, S., Egger, M., Pieringer, P., Göttlich, E. & Heitmeir, F., 2018.

Research output: Contribution to conferencePaperResearchpeer-review

Surface Characterization of a Real World Cylinder Liner Subject to Deposition from Combustion

Offner, G., Bewsher, S. R., Leighton, M., Mohammadpour, M. & Knaus, O., 2018.

Research output: Contribution to conferencePaperResearch

URBAN BUILDING ENERGY MODELING – METHOD AND SCENARIO CASE STUDY SCHALLMOOS

Nageler, P. J., Heimrath, R., Mach, T., Mair am Tinkhof, O., Schardinger, I., Mauthner, F., Schranzhofer, H. & Hochenauer, C., 4 Oct 2018, p. 34-41. 8 p.

Research output: Contribution to conferencePaperResearch

Heating
Hot Temperature
2017

3D Vision Guided Robotic Charging Station for Electric and Plug-in Hybrid Vehicles

Miseikis, J., Rüther, M., Walzel, B., Hirz, M. & Brunner, H., 2017.

Research output: Contribution to conferencePaperResearchpeer-review

A Comprehensive Algorithm for Automatic Emergency Lane-change

Samiee, S., Shao, L., Rogic, B., Eichberger, A., Azadi, S. & Kazemi, R., 14 Aug 2017.

Research output: Contribution to conferencePaperResearch

A Domain Decomposition Multilevel Preconditioner for Interpolation with Radial Basis Functions

Offner, G., Haase, M., Martin, D. & Schiffmann, P., 2017.

Research output: Contribution to conferencePaperResearchpeer-review

A Multi-Physics, Multi-Scale Investigation of the Piston Ring Pack: EPSMSO

Offner, G., Bewsher, S. R., Mohammadpour, M. & Rahnejat, H., 2017.

Research output: Contribution to conferencePaperResearchpeer-review

ANALYSIS OF THE CUTTING FORCE WITH ULTRASONIC ASSISTED MANUFACTURING OF STEEL (S235JR)

Zopf, P. & Haas, F., 6 Nov 2017. 8 p.

Research output: Contribution to conferencePaperResearchpeer-review

ASSESSMENT OF NO2 CONCENTRATION LEVELS WITHIN A STREET CANYON AND A TUNNEL PORTAL MICRO ENVIRONMENT

Uhrner, U., Reifeltshammer, R. J. & Sturm, P-J., 9 Oct 2017. 5 p.

Research output: Contribution to conferencePaperResearchpeer-review

Bionik in der Logistik - umsetzbares Potential!”

Tinello, D., Boley, M., Drack, M., Gebeshuber, I. & Winkler, H., 21 Sep 2017, p. 125. 139 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File

Comparison of Optimal & Real-time Operation Strategy for a Hybrid Electric Motorcycle

Rieger, P., Schweighofer, B., Wegleiter, H., Zinner, C., Schmidt, S., Kirchberger, R., Foxhall, N. & Hinterberger, W., 16 Nov 2017.

Research output: Contribution to conferencePaperResearchpeer-review

DEVELOPMENT OF A HYBRID DEEP DRAWING PROCESS TO REDUCE SPRINGBACK OF AHSS

Boskovic, V., Sommitsch, C. & Kicin, M., Jul 2017.

Research output: Contribution to conferencePaperResearchpeer-review

Development of a Procedure to Compare Kinematics of Human Body Models for Pedestrian Simulations

Klug, C., Feist, F., Raffler, M., Sinz, W., Petit, P., Ellway, J. & van Ratingen, M., 13 Sep 2017, p. 508-530. 22 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
Kinematics
Trajectories
Boundary conditions

Drop Stream – Immiscible Jet Collisions: Regimes and Fragmentation Mechanisms

Planchette, C., Hinterbichler, H. & Brenn, G., Sep 2017.

Research output: Contribution to conferencePaperResearchpeer-review

fragmentation
collisions
liquids
glycerols
wetting

Fahrverhalten für automatisierte Fahrfunktionen - Müssen sich Algorithmen wie Fahrer anpassen?

Schabauer, M., Karoshi, P., Ager, M. & Lex, C., 12 Oct 2017, p. 1-26. 26 p.

Research output: Contribution to conferencePaperResearch

Open Access
File

Full scale fire experiments for smoke propagation investigations in long rail tunnels

Sturm, P-J., Nöst, T., Rodler, J., Fruhwirt, D., Fößleitner, P., Thaller, T. & Kari, J., 13 Sep 2017, p. 325-338.

Research output: Contribution to conferencePaperResearchpeer-review

Smoke
Rails
Tunnels
Fires
experiment

Hydrogen- Powered Fuel Cell Range Extender Vehicle- Long Driving Range with Zero- Emissions

Trattner, A., Wallnöfer-Ogris, E., Salman, P. & Sartory, M. G., Jan 2017.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access

Influence and evaluation of the lubrication on the cold formability of a second-generation TWIP steel

Boskovic, V., Sommitsch, C. & Preininger, M., Jun 2017.

Research output: Contribution to conferencePaperResearch

Influences of system uncertainties on the numerical transfer path analysis of engine systems: Mechanical Systems and Signal Processing

Offner, G., Acri, A. & Nijman, E., 2017, p. 95: 106–121.

Research output: Contribution to conferencePaperResearchpeer-review

Investigations of Lean NOx Trap (LNT) Regeneration Strategies for Diesel Engines: SAE Paper No. 2017-24-0124

Maurer, M., Holler, P., Zarl, S., Fortner, T. & Eichlseder, H., 4 Sep 2017.

Research output: Contribution to conferencePaperResearchpeer-review

Li-ion battery model performance for automotive drive cycles with current pulse and EIS parameterization

Kollmeyer, P., Hackl, A. & Emadi, A., 22 Jun 2017, p. 486. 492 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
Parameterization
Open circuit voltage
Equivalent circuits
Lithium-ion batteries
Inductance

Linearized Modal Analysis of Vehicle Powertrains

Offner, G., Haslinger, J., Sopouch, M. & Zinkiewicz, B., 2017.

Research output: Contribution to conferencePaperResearchpeer-review

LUBE OIL CONSUMPTION MEASUREMENT ON INTERNAL COMBUSTION ENGINES

Rossegger, B., Schubert-Zallinger, C. & Wimmer, A., May 2017.

Research output: Contribution to conferencePaperResearchpeer-review

Measurement and Simulation of a Turbulent Boundary Layer Exposed to Acceleration Along a Flat Plate

Bader, P. & Sanz, W., 2017.

Research output: Contribution to conferencePaperResearchpeer-review

Measurement and simulation of hybrid and plug in hybrid vehicles for the handbook of emission factors

Lipp, S., Hausberger, S. & Schreiber, L., 2017.

Research output: Contribution to conferencePaperResearchpeer-review

Modular Concept of a Cost-Effective and Efficient On-Site Hydrogen Production Solution

Trattner, A., Sartory, M. G., Justl, M. & Salman, P., Jan 2017.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access

On the Capability of the gamma-Re_theta Transition Model to Predict Relaminarization

Bader, P., Pieringer, P. & Sanz, W., 2017.

Research output: Contribution to conferencePaperResearchpeer-review

Organizational Capabilities To Avoid Technological Lock-in

Wipfler, H., 3 Jul 2017. 10 p.

Research output: Contribution to conferencePaperResearchpeer-review

Parameterization Process of the Maxwell Model to Describe the Transient Force Behavior of a Tire

Hackl, A., Hirschberg, W., Lex, C. & Rill, G., 28 Mar 2017, p. 1. 10 p.

Research output: Contribution to conferencePaperResearchpeer-review

Physical Modeling of dislocation creep in high temperature steels

Krenmayr, B. & Sonderegger, B., 3 Jul 2017.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
Creep
Steel
Creep resistance
Temperature
Systematic errors

RPM-SYNCHRONOUS GRINDING – CONTROL CONCEPTS TO IMPROVE SURFACE QUALITIES FOR A HIGHLY EFFICIENT NON-CIRCULAR GRINDING APPROACH

Steffan, M., Haas, F. & Spenger, T., 10 Sep 2017, (Accepted/In press).

Research output: Contribution to conferencePaperResearchpeer-review

SENSOR CONCEPTS FOR CHARGING SLOW PROXIMITY LOCALIZATION FOR AUTOMATED CONDUCTIVE CHARGING OF ELECTRIC AND PLUG-IN HYBRID VEHICLES

Walzel, B. & Hirz, M., 6 Apr 2017. 8 p.

Research output: Contribution to conferencePaperResearchpeer-review

Simulation assisted impact analyses of automated driving on motorways for different levels of automation and penetration

Haberl, M., Fellendorf, M., Neuhold, R., Rudigier, M., Kerschbaumer, A., Eichberger, A. & Rogic, B., 4 Jul 2017.

Research output: Contribution to conferencePaperResearchpeer-review

THERMO-ACOUSTIC CHARACTERIZATION OF CAN-CAN INTERACTION OF A CAN-ANNULAR COMBUSTION SYSTEM BASED ON UNSTEADY CFD LES SIMULATION

Panek, L., Farisco, F. & Huth, M., 2017.

Research output: Contribution to conferencePaperResearchpeer-review

The role of academic Makerspaces in product creation: Matching between hardware entrepreneur's requests and Maker Movement elements on offer

Böhm, T., Ramsauer, C. & Friessnig, M. H., 10 Oct 2017.

Research output: Contribution to conferencePaperResearchpeer-review

Topological solvability and DAE-index conditions for mass flow controlled pumps in liquid flow networks: Electronic Transactions on Numeriacal Analysis

Offner, G., Baum, A-K. & Kolmbauer, M., 2017, p. 394-423.

Research output: Contribution to conferencePaperResearchpeer-review

Turbocharger dynamic analysis: Advanced design simulation in time domain using CFD predicted thermal bearing boundary conditions

Offner, G., Bukovnik, S., Diemath, A. & Smolik, L., 2017.

Research output: Contribution to conferencePaperResearchpeer-review

Tyre Type Dependent Transient Force Behaviour by Means of a Maxwell Model

Hackl, A., Hirschberg, W., Lex, C. & Rill, G., 14 Aug 2017.

Research output: Contribution to conferencePaperResearch

Überlegungen zur Übertragung bionischer Systemdesignmuster auf die Fabriklayout-und Materialflussplanung

Tinello, D. & Winkler, H., 20 Sep 2017.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File

Update of Emission Factors for EURO 6 Diesel Passenger Cars for the HBEFA

Matzer, C. U., Hausberger, S., Rexeis, M., Opetnik, M., Ramsauer, M., Mogg, O. & Wegerer, F., 2017.

Research output: Contribution to conferencePaperResearchpeer-review

Ventilation and safety concept of the emergency stop station ant the cross passages of the 33 km long Koralm rail tunnel

Bacher, M., Sturm, P-J., Fruhwirt, D., Rodler, J., Steiner, H. & Sampl, J., 13 Sep 2017, p. 559-574.

Research output: Contribution to conferencePaperResearchpeer-review

Ventilation
Rails
Tunnels
Smoke
incident
2016

+ERS - Plus Energy Network Reininghaus South: Towards a Plus Energy Settlement

Staller, H., Heimrath, R., Passer, A. & Kreiner, H., 2016.

Research output: Contribution to conferencePaperResearchpeer-review

3d-Elastohydrodynamic Simulation Model for Structure-Borne Noise Analyses of a DI Diesel Engine

Seifriedsberger, J., Wichtl, R. & Eichlseder, H., 15 Jun 2016, p. 1-12. 12 p.

Research output: Contribution to conferencePaperResearchpeer-review