Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2020

Filter
(Old data) Lecture or Presentation
2014

Numerical modelling of the damage and failure behaviour of flow drill screw joints between fibre-reinforced plastics and aluminium

Szlosarek, R., Karall, T., Berger, A., Hahne, C., Meyer, N. & Enzinger, N., 21 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Occupant model for integrated safety: Recent results in testing and simulation

Huber, P., Prüggler, A., Kirschbichler, S., Steidl, T., Praxl, N., Mayer, C., Weber, J., Yigit, E., Sinz, W. & Rieser, A., 16 Oct 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

On the Influence of Rotor Design on an Acoustically 3d-Designed Turbine Exit Guide Vane

Selic, T. & Marn, A., 20 Jun 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Operations Research in Healthcare Delivery: Case Studies from New Zealand

Walker, C., O'Sullivan, M., Ziedins, I. & Furian, N., 15 Dec 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Optimized microstructure for an increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Paul, S., Zeiler, G. & Sommitsch, C., 11 Sep 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Performance Analysis of Plug-In Hybrid Passenger Vehicles

Kraus, H., Ackerl, M. & Karoshi, P., 2 Jun 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Porosity characterization of biochar samples within the framework of the biochar cost action TD1107

Dieguez-Alonso, A., Anca-Couce, A., Zobel, N. & Behrendt, F., 16 Jan 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Rear-end shape influence on the aerodynamic properties of a realistic car model: a RANS and LES/RANS study

Jakirlic, S., Kutej, L., Hanssmann, D., Basara, B. & Tropea, C., 3 Aug 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Refurbishment of semi-regulated Kaplan turbines and customized hydraulic development by means of CFD

Jaberg, H. & Benigni, H., 21 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Rührreibschweißen von Leichtmetallen und MMCs

Sommitsch, C., Hütter, A., Pakkanen, J., Poletti, M. C., Tändl, J., Krpic, B., Ramskogler, C. & Enzinger, N., 6 Nov 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulation, Measurement and Design of Hydraulic Turbines

Schiffer, J., Benigni, H., Mosshammer, M. & Höller-Litzlhammer, S., 18 Nov 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulation of compression of a γ-TiAl alloy in 2D

Halici, D., Guang, C., Huber, D., Stockinger, M. & Poletti, M. C., 27 Jan 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulation of the damage and failure behaviour of flow drill screw joints between fibre-reinforced plastics and aluminium by using user-materials

Szlosarek, R., Karall, T., Hahne, C., Berger, A., Meyer, N. & Enzinger, N., 9 Oct 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulation of the damage and failure behaviour of flow drill screw joints between FRP and metals by using user-materials

Karall, T., Szlosarek, R., Enzinger, N., Meyer, N., Hahne, C. & Berger, A., 15 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulation of the deployment space for a side airbag in a component test rig

Gstrein, G., Koschitzky, D., Limmer, R. & Marbler-Gores, H., 16 Sep 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulationsbasierte Entwicklung von Verbrennungskonzepten für Gas und Dual Fuel Großmotoren

Wimmer, A., Pirker, G., Winter, H. & Krenn, M., 21 Oct 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Smart Mobility Applications (SMAP)

Fabian, J. & Walzel, B., 18 Sep 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Spray formation by centrifugal flow instability

Brenn, G. & Salman, P., 8 Sep 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Studies on ductile damage and flow instabilities during hot deformation of a multiphase γ-TiAl alloy

Halici, D., Zamani, H. A., Poletti, M. C., Sommitsch, C., Stockinger, M. & Huber, D., 7 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Studies on ductile damage and flow instabilities in γ-TiAl

Halici, D., Guang, C., Zamani, H. A., Huber, D. & Poletti, M. C., 7 Feb 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Subjecting a novel AlMgScZr alloy to electron beam and friction stir processing

Tändl, J., Hütter, A., Orthacker, A., Kothleitner, G. & Poletti, M. C., 5 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Subjecting a novel AlMgScZr alloy to electron beam and friction stir processing

Tändl, J., Hütter, A. & Poletti, M. C., 16 Jul 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Teilentladungserfassung an elektrischen Betriebsmitteln bei Gleichspannungsbeanspruchung

Fabian, J. & Schichler, U., 26 Jun 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Thomography in Analytical Transmission Electron Microscopy of nanomaterials

Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C. & Kothleitner, G., 12 Oct 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Three dimensional occupant kinematics during frontal, lateral and combined emergency maneuvers

Huber, P., Kirschbichler, S., Prüggler, A. & Steidl, T., 10 Sep 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Three years of working experience with different solvents at a realistic post combustion capture pilot plant

Rabensteiner, M., Kinger, G., Koller, M. & Hochenauer, C., 5 Oct 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Tiefenanalyse unfallkausaler Zusammenhänge bei Kinderverkehrsunfällen und Planungsstandards

Tomasch, E. & Hoschopf, H., 25 Nov 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Tomography in Analytical Transmission Electron Microscopy of Nanomaterials

Orthacker, A., Haberfehlner, G., Poletti, M. C., Tändl, J. & Kothleitner, G., 8 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Towards holistic modeling and simulation of discrete event and individual based behavior

Furian, N. & Neubacher, D., 22 Oct 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Trocknung partikelbeladener Pasten (drying of particle-laden pastes)

Brenn, G., Steiner, H., Planchette, C., Kondor, I., Mercuri, A. & Scharrer, G., 24 Mar 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Type IV cracking in advanced martensitic chromium steel

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 5 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Untersuchung des Bruchverhaltens älterer und jüngerer menschlicher Rippen - Definition eines Materialmodells und Implementierung in ein FE Human Model

Mayer, C., Kirschbichler, S., Tomasch, E., Sinz, W., Fressmann, D. & Mayer, F., 12 Feb 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Virtuelle und reale Absicherung crashrelevanter Strukturbauteile mit neuartigem Prüfstandkonzept

Marbler-Gores, H., Teibinger, A., Schluder, H., Conrad, V. & Steffan, H., 18 Nov 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Wärmepumpen für den industriellen Einsatz

Rieberer, R., Zotter, G. & Hannl, D., 10 Oct 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Wirkungsgrad- und Anlagenmessung

Guggenberger, M. & Jaberg, H., 27 Nov 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2013

3D Simulation and Process Optimization of Laser Assisted Milling of Ti6Al4V

Zamani, H. A., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 13 Jun 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

3D Simulation of Laser Assisted Side Milling of Ti6Al4V Alloy using Modified Johnson-Cook Material Model

Zamani, H. A., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 22 Apr 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

A concept for a "thermally driven" solution pump suitable for ammonia/water absorption heat pumping systems

Zotter, G. & Rieberer, R., 26 Sep 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Advanced creep resistant martensitic steels: design, simulation and testing

Beal, C., Sommitsch, C., Schlacher, C., Plesiutschnig, E., Schuler, M. & Vujic, S., 10 Jul 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Advanced microstructures for increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Sommitsch, C., Mitsche, S., Paul, S. & Zeiler, G., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A new approach for the reduction of aerodynamic drag of long-distance transportation vehicles

Hirz, M. & Stadler, S., 1 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

An Innovative Approach of Joining AISI 316L Stainless Chains Using Linear Friction Welding

Mucic, K., Enzinger, N. & Fuchs, F., 7 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Aufbau und Betrieb der CO2-Abscheideanlage "CO2SEPPL" am KW Dürnrohr

Rabensteiner, M. & Koller, M., 17 Apr 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Ausbreitungsrechnungen im Rahmen von Genehmigungsverfahren

Kurz, C. & Sturm, P-J., 9 Apr 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Bionik in der Logistik. Träumerei oder umsetzbares Potential?

Tinello, D. & Winkler, H., 26 Sep 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Calculation of hardness distribution in the HAZ of microalloyed steel

Rahman, M. M. & Enzinger, N., 14 Mar 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Calculation of hardness distribution in the HAZ of micro-alloyed steel

Rahman, M. M., Maurer, W., Ernst, W., Rauch, R. & Enzinger, N., 11 Sep 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Closed loop simulation of the chain "cold-forming - welding - crash load" for the prediction of the crash behavior of car body components

Kolleck, R., Auer, P., Schröder, M., Trattnig, G., Heller, D. & Walch, C., 7 May 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Creep investigation of CB2 joints using similar rutile CB2-flux cored wire

Schuler, M., Baumgartner, S., Schnitzer, R. & Enzinger, N., 11 Sep 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Decomposition of the Alpha''/Beta duplex-phase microstructure during continuous heating of a near-Beta Ti-alloy

Barriobero Vila, P., Warchomicka, F. G., Requena, G., Stockinger, M., Schell, N., Stark, A. & Buslaps, T., 3 Sep 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch