Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2020

Filter
(Old data) Lecture or Presentation

Combination of solar thermal and heat pumps including heat recovery from waste water

Lerch, W. & Heinz, A., 18 Oct 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Combined mental and flight simulator training

Koglbauer, I. V. & Braunstingl, R., 8 Jul 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Combined Orientation and Phase Contrast Imaging of Precipitates in 9-12% Cr Steels

Sonderegger, B., Mitsche, S. & Cerjak, H-H., 26 Sep 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Combining solar thermal and heat pumps including waste water heat recovery

Lerch, W. & Heinz, A., 28 Oct 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Combining system dynamics and discrete event simulations - overview of hybrid simulation models

Jovanoski, B., Minovski, R., Lichtenegger, G. C. & Vössner, S., 14 Jun 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Combustion Prediction for Large Diesel Engines Using 3D CFD Simulation

Vystejn, J., Taucher, G., Engelmayer, M. & Wimmer, A., 24 Jun 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

CompactRIO-basierte Regler für servohydraulische Prüfzylinder

Sobe, K. & Thurner, T., 28 Mar 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison between microstructure evolution in IN718 and ATI AllvacR 718PlusTM - simulation and trial forgings

Huber, D., Sommitsch, C. & Stockinger, M., 25 May 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison Between the Flow Through an Aggressive and a Super-Aggressive Intermediate Turbine Duct

Marn, A., Göttlich, E., Malzacher, F., Santner, C. & Heitmeir, F., 8 Sep 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of an Acoustically Optimized and an Aerodynamically Optimized Exit Guide Vane

Selic, T., Marn, A., Schönleitner, F., Broszat, D., Hoeger, M. & Heitmeir, F., 23 Mar 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of a State of the Art and a High Stage Loading Rotor

Selic, T., Lengani, D., Broszat, D., Schönleitner, F. & Marn, A., 16 Jun 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of cellular automata and phase field methods for mdelling of annealing

Singh, B., Candic, M., Sommitsch, C. & Tian, B., 31 May 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of Different In-Situ Desulfurization Sorbents for Coarse Desulfurization in a Catalytic Gas Cleaning Process

Husmann, S. M., Zuber, C., Kienberger, T. & Hochenauer, C., 7 Jun 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Comparison of Different Numerical Approaches at the Centrifugal Compressor Radiver

Borm, O., Balassa, B. & Kau, H-P., 12 Sep 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of fracture criteria at high temperatures for nickel-based alloys

Rüf, G., Sommitsch, C. & Buchmayr, B., 25 Oct 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of the Aerodynamics of Acoustically Designed EGVs and a State-of-the-Art EGV

Marn, A., Broszat, D., Selic, T., Schönleitner, F. & Heitmeir, F., 16 Jun 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of the experimental results between a 2D EGV cascade test and a rig test under engine representative conditions

Schönleitner, F., Koch, H., Selic, T., Höger, M. & Marn, A., 16 Jun 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Compositional characterisation of secondary carbides and complex nitrides in chromium

Albu, M., Mendez Martin, F. & Kothleitner, G., 5 Oct 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Compression of a tumbling vortex: a LES and PANS study

Jakirlic, S., Chang, C-Y., Tropea, C. & Basara, B., 28 Jul 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Computational analysis of the precipitation kinetics during continuous casting of microalloyed steels

Pudar, M., Kozeschnik, E., Zamberger, S. & Spiradek-Hahn, K., 13 Nov 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Computational Analysis of the Precipitation Kinetics in Nb Microalloyed Steels

Pudar, M., Kozeschnik, E., Parteder, E. & Sormann, A., 12 Sep 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Computational Investigation of Railway Track Geometry and its Dynamic Assessment

Luber, B. & Hirschberg, W., 10 May 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Computational modeling of secondary flows in single blade rows and performance assessment in 3D turbine stages computations using wall functions

Xisto, C. M., Pascoa, J. C. & Göttlich, E., 25 Nov 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Computational Simulation of Dust Resuspension due to Heavy Vehicle Traffic

Iser, F., Hörmann, T., Puntigam, W. & Almbauer, R., 26 Aug 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Computation of IC-Engine-Type Flows by a Variable Resolution Model

Jakirlic, S., Chang, C-Y. & Basara, B., 24 Apr 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Computation of Laminar-Turbulent Transition in Turbomachinery Using an Intermittency Transport Model

Pecnik, R., Sanz, W., Gehrer, A. & Woisetschläger, J., 5 Mar 2003.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

COMPUTATION OF LAMINAR-TURBULENT TRANSITION IN TURBOMACHINERY USING THE CORRELATION BASED GAMMA-RE_THETA TRANSITION MODEL

Kelterer, M. E., Pecnik, R. & Sanz, W., 17 Jun 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Computer Aided Dimensioning And Validation of A Versatile Test Facility For Combustion Chambers And Turbines

Leitgeb, T., Giuliani, F., Niederhammer, A. & Pirker, H-P., 8 Jun 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Computer Simulation Based Prognosis Of The Rate Of Screening Colonoscopy In The Population At Risk

Vössner, S., Stark, G. & Martischnig, A., 20 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Computersimulation der Ausscheidungsentwicklung in mehr-komponenten, mehr-phasen Werkstoffen - Theorie, Anwendung und Potential

Sonderegger, B., Kozeschnik, E., Zenisek, J., Svoboda, J. & Fischer, F. D., 23 May 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Computer simulation of precipitation in a complex 9-12% cr-steel during fabrication heat treatment

Rajek, H. J., Kozeschnik, E. & Cerjak, H-H., 26 Oct 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Computer Simulation of the Precipitate Evolution during Heat Treatment of Complex Materials

Kozeschnik, E., Rajek, H. J. & Cerjak, H-H., 25 Oct 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Computer Simulation of the Precipitate Evolution During Industrial Heat Treatment of Complex Alloys

Kozeschnik, E., Sonderegger, B., Holzer, I. & Cerjak, H-H., 4 Jul 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Concentration fields in evaporating films on cylindrical surfaces

Czaputa, K., Meile, W. & Brenn, G., 17 Oct 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Concept for a versatile spray test rig for comparison of evaporation between kerosene and replacement fuels for aviation

Fritzer, J., Giuliani, F., Leitgeb, T., Lang, A. & Hennig, C. A., 6 Sep 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Concepts, Potentials and Challenges for SI-Engines with Hydrogen and Hydrogend-enriched Gases

Leitner, D., Eichlseder, H. & Skalla, C., 18 Jun 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Concept Study of Range Extender Applications in Electric Scooters

Schacht, H-J., Kirchberger, R., Winkler, F. & Schmidt, S., 8 Nov 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Considerations for sound parameter studies in EBW of thick walled components

Wiednig, C. A., Enzinger, N. & Beal, C., 2 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Considering Influences of Sustainable Production in Early Automotive Engineering Phases

Brunner, H. & Hirz, M., 1 Jun 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Constrained Order Packing-Comparison of Heuristic Approaches for a New Bin Packing Problem

Furian, N. & Vössner, S., 15 Jun 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Control of a Low Cost Range Extender for L1e Class PHEV Two-Wheelers

Schacht, H-J., Leibetseder, M., Bretterklieber, N., Schmidt, S. & Kirchberger, R., 18 Nov 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Co-operative Development of Environmentally Friendly Vehicles for Asian and European Markets

Hirz, M. & Zhou, S., 25 Nov 2016, p. 1-19.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Co-ordination of European Research in Structural Materials for Power Generation Equipment

Sommitsch, C., Vanstone, R., Kern, T-U., Bernard, P., Mayr, P., Thomson, R. & Agüero, A., 14 Sep 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Correction for accurate instanteneous emission measurement of passenger cars

Le Anh, T., Hausberger, S. & Zallinger, M. S., 15 May 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Correction of test cycle tolerances: evaluating the impact on CO2 results

Pavlovic, J., Marotta, A., Ciuffo, B., Serra, S., Fontaras, G., Anagnostopoulos, K., Tsiakmakis, S., Arcidiacono, V. & Hausberger, S., 2016, p. 227 - 244.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Co-Simulation zur Optimierung von MKS

Karoshi, P., Rühringer, U., Rojas, A. E. & Eichberger, A., 16 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Cost Assessment and Optimization in the Front-End of the Design and Development Process of a Motorcycle Engine

Böhm, T., 1 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Couette-type flow of non-Newtonian power-law fluids through converging nozzles

Steiner, H., Baric, E. & Brenn, G., 20 Apr 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Coupling of 0-, 1- and 3-d Tool for the Simulation of the Suction Line of a Hermetic Reciprocating Compressor

Lang, W., Almbauer, R., Burgstaller, A. & Nagy, D., 14 Jul 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Crack Growth in Massive Forming: A Fracture Mechanics Approach

Trattnig, G., Sommitsch, C. & Pippan, R., 11 Aug 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch