Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2020

Filter
(Old data) Lecture or Presentation

Berufliche Selbstbestimmung von Lehrer/innen und dessen Auswirkungen auf Unterrichtsgestaltung und Lernmotivation von Schüler/innen

Hanfstingl, B., Müller, F., Benke, G. & Riemenschneider, I. C., 10 Sep 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Beschreibung der Subkornmissorientierung in der Nähe von harten Teilchen von plastisch verformten Metallen

Loidolt, P., Ulz, M. H., Mitter, W. & Sommitsch, C., 12 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Bestimmung von Polymer-Retardationszeiten anhand linearer Tropfenschwingungen

Brenn, G. & Teichtmeister, S., 19 Mar 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Betrachtung von Türschlosssystemen bezüglich des sicherheitsrelevanten Aspekts

Kubista, A. & Gugler, J., 24 Sep 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Beurteilung der effektiven Dehnung bei der mehrstufigen Verformung von komplexen Legierungen

Candic, M., Tian, B. & Sommitsch, C., 27 Mar 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Beurteilungskriterien für ottomotorische DI-Verbrennungskonzepte

Eichlseder, H., Hübner, W., Rubbert, S. & Sallmann, M., 17 Jun 1998.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Bewertung der CFD-Simulation zur Vorausberechnung von Verbrennung und Emissionen eines Großdieselmotors

Hirschl, G., Engelmayer, M. & Wimmer, A., 23 Oct 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Bewertung von Fahrerassistenzsystemen von nicht professionellen Fahrerinnen- und fahrern im Realversuch

Eichberger, A., Koglbauer, I. V., Lex, C., Bliem, N., Sternat, A. S., Schinko, C., Battel, M. & Holzinger, J., 10 Oct 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Biochar: key relations between production conditions and efficient application

Dieguez-Alonso, A., Anca-Couce, A., Zobel, N., Ojeda, G., Bachmann, J. & Behrendt, F., 19 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

BioE - Emissions from the engine combustion of biofuels and fuel mixtures

Blassnegger, J., Knauer, M., Carrara, M., Nießner, R., Kunze, J. & Schramm, K-W., 30 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

BIOMIMETICS APPLIED TO FACTORY LAYOUT PLANNING: HONEYCOMBS AS BIO-INSPIRATION TO REDUCE INTERNAL TRANSPORT COSTS IN FACTORIES

Tinello, D., 23 Sep 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Biomimetics applied to logistics: Assignment of operational resources within ideal facility layouts by applying Fibonacci, spider webs, nautilus shell and honeycombs

Tinello, D., 23 Jun 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Bionik in der Logistik. Träumerei oder umsetzbares Potential?

Tinello, D. & Winkler, H., 26 Sep 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Bivalenter Fahzeugprototyp für Wassersttoff und Benzin als Übergangstechnologie zur Wasstoffwirtschaft

Hepp, C., Leitner, D. & Eichlseder, H., 30 Sep 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Blade-Disc Connection Parameter Variation

Marn, A., Pichler, F., Selic, T. & Schönleitner, F., 8 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Blade row interaction in a one and a half stage transonic turbine focusing on three dimensional effects - part 1

Paradiso, B., Persico, G., Gaetani, P., Schennach, O., Pecnik, R. & Woisetschläger, J., 8 Jun 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Blade row interaction in a one and a half stage transonic turbine focusing on three dimensional effects - part 2

Schennach, O., Paradiso, B., Persico, G., Gaetani, P. & Woisetschläger, J., 8 Jun 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Bruchmechanische Untersuchung des Risswachstums für die Massivumformung

Trattnig, G., Sommitsch, C. & Pippan, R., 17 Feb 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Building stock in Austria. Obstacles and how to overcome them.

Michlmair, M. & Mach, T., 22 Sep 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Business Modellierung und Simulation am Beispiel des Gesundheitswesens

Vössner, S. & Stark, G., 22 May 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

CAD-Methoden für Superuser in der Automobilentwicklung

Hirz, M., Harrich, A., Rossbacher, P. & Mayr, J., 21 Nov 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

CAE-Simulation und Absicherung

Rieser, A., Schluder, H., Eichberger, A., Heubrandtner, T., Trattnig, G. & Prüggler, A., 1 Oct 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Calculation of energies of coherent interfaces and application to the nucleation, growth and coarsening of precipitates

Sonderegger, B., Holzer, I. & Kozeschnik, E., 25 Aug 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Calculation of hardness distribution in the HAZ of microalloyed steel

Rahman, M. M. & Enzinger, N., 14 Mar 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Calculation of hardness distribution in the HAZ of micro-alloyed steel

Rahman, M. M., Maurer, W., Ernst, W., Rauch, R. & Enzinger, N., 11 Sep 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Can V2X communication Help Electric Vehicles Save Energy?

Tielert, T., Rieger, D., Hartenstein, H., Luz, R. & Hausberger, S., 5 Nov 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Catia V5 Part and Assembly Design in Mechanical Engineering

Harrich, A. & Mayr, J., 8 Mar 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Catia V5 Surface Design in Mechanical Engineering

Hirz, M. & Mayr, J., 27 Mar 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

CFD analysis of a natural gas fired lab-scale furnace and an walking hearth furnace with different oxygen enrichments

Mayr, B., Prieler, R. J., Hochenauer, C. & Demuth, M., 4 May 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

CFD analysis of natural gas fired furnaces with different oxygen enrichments

Mayr, B., Prieler, R. J., Hochenauer, C. & Demuth, M., 4 May 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

CFD modelling and performance analysis of a steel reheating furnace under oxygen enriched conditions

Mayr, B., Prieler, R. J., Demuth, M., Moderer, L. & Hochenauer, C., Nov 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

CFD-Modelling of External Heated Pyrolysis of Wood Chips

Suyitno, S. & Lettner, F., 18 Oct 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

CFD-Simulationen von verschiedenen Industrieöfen

Mayr, B., Prieler, R. J. & Hochenauer, C., 15 Oct 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

CFD simulation of the flow around towers and rotor blades

Kudelas, D., Meile, W. & Brenn, G., 30 Oct 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Challenges in powertrain and vehicle NVH simulation

Priebsch, H-H., Hauer, I., Böhler, E., Zieher, F. & Bartosch, T., 2 Jun 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Challenges of deformation of two different materials under “extreme conditions”

Halici, D., Peter Loidolt, N. V., Bureau, R. & Poletti, M. C., 8 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Challenges when changing Business Models - insights from High-technology Industry

Müller, C., 2016. 11 p.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Changing traffic displays for visual flight to enhance rapid conflict decisions

Koglbauer, I. V., Braunstingl, R. & Haberkorn, T., 22 Sep 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Characterisation of Cracks in High Strength Steel Weldments

Enzinger, N. & Cerjak, H-H., 27 Aug 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Characterisation of Cracks in High Strength Steel Weldments

Enzinger, N. & Cerjak, H-H., 21 Mar 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Characteristics of single air bubbles in viscoelastic liquids at the rise velocity jump discontinuity

Pilz, C. & Brenn, G., 9 Jul 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Characterization and Simulation of Precipitation Kinetics During Heat Treatment of the Hot-Work Tool Steel X38CrMoV5-3

Sonderegger, B., Kozeschnik, E., Bischof, M., Leitner, H., Clemens, H., Svoboda, J. & Fischer, F. D., 4 May 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Characterization of electron beam and friction stir welds in a novel Al-Mg-Sc-Zr alloy

Tändl, J. & Poletti, M. C., 12 Oct 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Characterization of friction stir welded multilayered steel

Tändl, J., Nambu, S., Inoue, J., Enzinger, N. & Koseki, T., 4 Jun 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Charakterisierung der Ni-Basis-Superlegierung Alloy 718 Plus

Stotter, C., Sommitsch, C. & Buchmayr, B., 27 Mar 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Child and Dummy Injury Criteria Development by Using Scalling Methods

Steffan, H. & Ciglaric, I., 6 Nov 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Children and elderly people taking part in traffic as pedestrians: A challenge for active safety functions

Weinberger, M., Tomasch, E., Hoschopf, H. & Steffan, H., 28 Sep 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Closed loop simulation of the chain "cold-forming - welding - crash load" for the prediction of the crash behavior of car body components

Kolleck, R., Auer, P., Schröder, M., Trattnig, G., Heller, D. & Walch, C., 7 May 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

CO2-freie Mobilität mit einem multivalenten Fahrzeug für variablen Erdgas/Wasserstoff-Mischbetrieb

Eichlseder, H., Klell, M., Schaffer, K. M., Leitner, D. & Sartory, M., 10 Feb 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Coalescence, torus formation and break-up of settling drops: experiments and computer simulation

Machu, G., Meile, W., Nitsche, L. & Schaflinger, U., 27 Aug 2000.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch