Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2020

Filter
Conference contribution
2001

Optimal path synthesis of the four-bar mechanism

Ciglaric, I., Krasna, S. & Prebil, I., 2001, Annual Meeting of the International Association of Applied Mathematics and Mechanics. Berlin: Wiley-VCH , p. 661-662

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Phasenaufgelöste LDA-Messungen in der Gasströmung einer Luftstromzerstäuberdüse

Diers, O., Giuliani, F., Biscos, Y., Gajan, P. & Ledoux, M., 2001, (Submitted) Lasermethoden in der Strömungsmeßtechnik. Aachen: Shaker-Verlag GmbH, (Berichte aus der Lasertechnik).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Potenzial neuer Motorkonzepte aus thermodynamischer Sicht

Pischinger, R. & Klell, M., 2001, Tagung Der Arbeitsprozess des Verbrennungsmotors. ., Vol. 79. p. 1-20 (Mitteilungen des Institutes für Verbrennungskraftmaschinen und Thermodynamik).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Prüfung des Be- und Entladeverhaltens einer neuartigen Schichtladeeinheit

Streicher, W., Heiling, K. & Demmerer, C., 2001, 11. Symposium Thermische Solarenergie. Regensburg: Otti-Technologie-Kolleg, p. 79-83

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Regular Polyhedral Linkages

Wohlhart, K., 2001, Proceedings of the second Workshop on Computational Kinematics. ., p. 239-248

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Schwingungsanalyse verstimmter Schaufelkränze mit Reibelementen

Panning, L. ., Sextro, W. & Popp, K. ., 2001, Schwingungen in rotierenden Maschinen V, Referate der Tagung in Wien. Braunschweig: Vieweg Verlag, p. 297-306

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Sensitivity analysis of the human body mechanical model as injury criteria

Ciglaric, I., Ambroz, M., Prebil, I. & Ravnik, D., 2001, Europe and the second century of auto-mobility. ., p. 85-89

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Spektrointerferometrische Analyse des Schweißlichtbogens

Rajek, H. J., Haider, T., Morozov, A. & Neger, T., 2001, Werkstofftagung. ., p. 121-127

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Stereoscopic PIV in a Transonic Turbine Stage

Lang, H., Morck, T. & Woisetschläger, J., 2001, Industrial Applications of PIV in Industry. ., p. xx-xx

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Studies Carried out on an maintenance valve using Hydraulic Scale Model Tests

Logar, R., Klasinc, R. & Steinman, F., 2001, XXIX IAHR Congress Proceedings. ., p. 167-171

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The drying time of single suspension droplets under various conditions

Kastner, O., Brenn, G. & Tropea, C., 2001, Proc. Conference "Spray Drying 01 and Related Processes''. ., p. paper-1

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The flow field of pump impellers with forward and backward sweep

Forstner, M., Kuhn, K., Glas, W. & Jaberg, H., 2001, Conference Proceedings - 4th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics. Padova: Servizi Grafici Editoriali, p. 577-588

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Time Derivates of the Velocity Motor

Wohlhart, K., 2001, (Submitted) Proceedings of the SYROM 2001. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Vehicle dynamics simulation. Part 1, Mathematical model

Ciglaric, I. & Prebil, I., 2001, Europe and the second century of auto-mobility. ., p. 405-412

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Vehicle dynamics simulation. Part 2, Presenting the simulated vehicle dynamics in virtual 3D environment

Ambroz, M., Ciglaric, I. & Prebil, I., 2001, Europe and the second century of auto-mobility. ., p. 125-132

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Werkstoffe für das Kraftwerk der Zukunft

Cerjak, H-H., Hofer, P., Letofsky, E. & Schaffernak, B., 2001, 7. Internationales Aachener Schweisstechnik Kolloquium. ., p. 193-208

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Zur Objektivierung des Fahrverhaltens in der Fahrwerksentwicklung

Hirschberg, W., 2001, Tagung H030060371: Driveability, Haus der Technik, Essen. Essen: Haus der Technik, p. 1-14

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2002

A Comprehensive Approach on the Development and Improvement of 9-12% Cr Steels

Weinert, P., Dimmler, G., Letofsky, E., Sonderegger, B., Rajek, H. J. & Cerjak, H-H., 2002, 28th MPA-Seminar. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Acoustic Simulation - Run Up Analysis of New Audi V8 Otto Engine

Fischer, P., 2002, (Accepted/In press) Fisita 2002 World Automotive Conference. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

A Modified Hot Tearing Criterion for Steels

Rindler, W., Kozeschnik, E., Enzinger, N. & Buchmayr, B., 2002, 10th International MAGMAsoft User Group Meeting. ., p. 13-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Modified Hot Tearing Criterion for Steels

Rindler, W., Enzinger, N., Kozeschnik, E. & Buchmayr, B., 2002, Mathematical Modelling of Weld Phenomena. London: IOM, p. 819-835

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Application of the Wave Based Method for the Steady-state Acoustic Response Prediction of a Car Cavity in the Mid-frequency Range

Hepberger, A., Priebsch, H-H., Desmet, W., van Hal, B., Pluymers, B. & Sas, P., 2002, Noise and Vibration Engineering. Sas, P. (ed.). Haverlee: Katholieke Univ. Leuven, Dep. Werktuigkunde, p. 877-884 (Proceedings of ISMA).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Austrian research for advanced environmental power and CO2 sequestration

Hacker, V. & Jericha, H., 2002, International World Energy System Conference. ., p. 17-22

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Automatic Surface Inspection of Raw Milled Steel Blocks Using Range Imaging

Pernkopf, F., Pernkopf, F. & O'Leary, P., 2002, (Submitted) Newsletter for SPIE's International Technical Group on Electornic Imaging. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Calculation of the Influence of the Weld Pattern on the final Residual Stress State

Enzinger, N. & Cerjak, H-H., 2002, Proc. of the 6th European Conference on Residual Stresses. Dias, A. M. (ed.). Zuerich: ttp, p. 147-152

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characterisation of an air-blast injection device with forced periodic entries

Giuliani, F., Diers, O., Gajan, P. & Ledoux, M., 2002, IUTAM Symposium on Turbulent Mixing and Combustion. Pollard, A. & Candel, S. (eds.). Dordrecht [u.a.]: Kluwer Academic Publishers, Vol. 70. p. 327-336 (Fluid mechanics and its applications).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Decentralized generation of heat and power by means of the Biomass Heatpipe Reformer

Karl, J., Brost, O., Metz, T., Groll, M. & Hein, D., 2002, 12 Int. Heat Pipe Conf.. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dedection fo Surface Defects on Raw Milled Steel Blocks Using Range Imaging

Pernkopf, F., Pernkopf, F. & O'Leary, P., 2002, IS&T/SPIE's 14th Annual Symposium on Electronic Imaging. ., p. 170-181

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development of a Direct Injection Two-Stroke Engine for Scooters

Arnone, L. & Kirchberger, R., 2002, SETC - Small Engine Technology Conference. ., p. x 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dezentrale Verwertung von Biomasse und biogenen Reststoffen

Karl, J., 2002, Energie Innovativ. Düsseldorf: VDI, p. 49-61

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Die Herausforderung an die zerstörungsfreie Prüfung an der Schwelle des 21. Jahrhunderts

Cerjak, H-H., 2002, ÖGfZP-Jahrestagung in: Schweiß- und Prüftechnik 6. ., p. 88-93

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dynamische Vorgänge beim Aufprall von Wagenzügen auf Gleisabschlüsse

Kecskemethy, A. & Grabner, G., 2002, SFT 2002. Berlin: Siemens, Vol. 126. p. 162-167 (ZEVrail ; Sonderheft).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Einführung in die Simulation von solarthermischen Systemen

Streicher, W., 2002, Internationales Sonnenforum. Berlin: Deutsche Gesellschaft für Sonnenenergie e.V, p. 99-100

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Elongational rheometry with viscoelastic fluids - state-of-the-art and perspectives

Brenn, G., 2002, Proc. National Conf. Frontiers in Mat. Sci. and Technol. (FMST02). ., p. 17--

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Fast Calculation of the Statistics of the Forced Response of Mistuned Bladed Disk Assemblies with Friction Contacts

Sextro, W., Panning, W. ., Götting, F. . & Popp, K. ., 2002, ASME Turbo Expo. ., p. 1-9 (ASME papers ; GT-2002-30427).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

FEM - gekoppelte Simulation der Mikrostruktur bei Umformprozessen

Wasle, G., Lind, C., Buchmayr, B. & Sommitsch, C., 2002, Tagungsband zum XXI. Verformungskundlichen Kolloquium. Leoben: VKH Leoben, p. 65-73

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Four-bar linkage design using global optimization approach

Krasna, S., Ciglaric, I. & Prebil, I., 2002, Proceedings of the 7th International Design Conference DESIGN 2002. Glasgow: The Design Society, p. 1199-1204

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

High performance implementation and conceptual development of the wave based method for steady-state dynamic analysis of acoustic problems

van Hal, B., Hepberger, A., Priebsch, H-H., Desmet, W. & Sas, P., 2002, Noise and Vibration Engineering. Sas, P. (ed.). Haverlee: Katholieke Univ. Leuven, Dep. Werktuigkunde, p. 817-826 (Proceedings of ISMA).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Influence of Blade Passing on the Stator Wake in a Transonic Turbine Stage Investigated by PIV

Lang, H., Hampel, B., Göttlich, E., Woisetschläger, J. & Heitmeir, F., 2002, Application of PIV in transonic flows. ., p. xx-xx

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Innovativer Solarregler für thermische Solaranlagen ohne Kollektorfühler

Holter, C. & Streicher, W., 2002, Gleisdorf Solar 2002, 6. Internationales Symposium für Sonnenenergienutzung. Gleisdorf: Aee-Intec, Eigenverlag, p. 73-76

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Integration von Brennstoffzellensystemen in KWK-Anlagen mit allothermer Vergasung

Karl, J. & Hein, D., 2002, Energie Innovativ. Düsseldorf: VDI, p. 337-348

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of Boron Distribution in Martensitic 9% Cr Creep Resistant Steel

Hofer, P., Miller, M. K., Babu, S. S., David, S. A. & Cerjak, H-H., 2002, ISIJ International, Vol 42, Supplement. ., p. 62-66

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigations and Analysis on the Stationary Creep Behaviour of 9-12% Chromium Ferritic Martensitic Steels

Dimmler, G., Weinert, P. & Cerjak, H-H., 2002, 7th Liege Conference: Materials for Advanced Power Engineering. ., p. 1539-1550

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigations on the elongational behavior of aqueous solutions of flexible and rigid polymers by a novel elongational device

Brenn, G., Stelter, M., Yarin, A. L., Singh, R. P. & Durst, F., 2002, Proc. 10th Polychar World Forum on Polymer Applications and Theory. ., p. 135--

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Koppelung von Solaranlagen und Biomasse-Nahwärmenetzen

Heinz, A. & Streicher, W., 2002, Gleisdorf Solar 2002, 6. Internationales Symposium für Sonnenenergienutzung. Gleisdorf: AEE-Intec Eigenverlag, p. 121-126

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Koppelung von Solaranlagen und Biomasse-Nahwärmenetzen, Kriterien für eine sonnvolle Anwendung

Heinz, A. & Streicher, W., 2002, Symposium Thermische Solarenergie. ., p. 362-367

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Kraft-Wärme-Kopplung mit Vergasungsanlagen

Karl, J., 2002, Otti-Kolleg Fachseminar "Kraft-Wärme-Kopplung mit Biobrennstoffen". ., p. 69-100

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Micro-characterisation of precipitates in 9-12% Cr-steels using EELS and EFTEM

Letofsky-Papst, I., Hofer, F., Warbichler, P., Letofsky, E. & Cerjak, H-H., 2002, Materials Week 2002, ICM-International Congress Centre Munich,. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructure Aspects of Creep Resistant Welded Joints

Letofsky, E. & Cerjak, H-H., 2002, First International Conference on Advanced Structural Steels (ICASS 2002). ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Mises Derivatives of Motors and Motor Tensors

Wohlhart, K., 2002, Proceeding of the Romansy. ., Vol. 14. p. 87-98

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review