Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2020

Filter
Conference contribution
2016

Effect of RTE treatment on toughness of HSS weld metal

Cerjak, H-H., Enzinger, N., Caliskanoglu, O., Figner, G., Pudar, M., Mendez Martin, F. & Domankova, M., 10 Oct 2016, Proceedings 10th International Conference on Trends in Welding Research. Tokyo, p. 213-216 S11-1

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Efficient and Accurate Consideration of Nonlinear Joint Contact Within Multibody Simulation

Pichler, F., Witteveen, W. & Fischer, P., 2016, Nonlinear Dynamics: Proceedings of the 33rd IMAC, A Conference and Exposition on Structural Dynamics. Orlando, USA, Vol. Vol. 1. p. 441-448 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Pendulums
Multilayers
Dynamical systems
Railroad cars
Derivatives

Efficient application of multi-core processors as substitute of the E-Gas (Etc) monitoring concept

Großmann, M., Hirz, M. & Fabian, J., 2016, 2016 SAI Computing Conference (SAI). London: Institute of Electrical and Electronics Engineers, p. 913-918

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Monitoring
Gases
Controllers
Automobiles

Einfluss der Diesel-Piloteinspritzung auf die Verbrennung in Diesel-Gas Dual Fuel Motoren

Malin, M., Kiesling, C., Redtenbacher, C. & Wimmer, A., 24 Nov 2016, 10. Tagung Diesel u. Benzindirekteinspritzung, Berlin 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Electron beam process for the production of model alloys

Sommitsch, C., Wiednig, C. A., Spenger, T., Enzinger, N., Hofer, F. & Simic, S., 2016, Beam Technologies & Laser Application. St. Petersburg: Publishing house SpbSPU, p. 75-81

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Empirical Evidences on Management Control Systems in Post-incubation of High-Technology Start-ups

Kerschenbauer, J. & Soos, J., 16 May 2016, International Association for Management of Technology IAMOT 2016 Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Enhanced knowledge-based 3D-CAD methods supporting automotive body-in-white production engineering

Hirz, M. & Rossbacher, P., 1 Jun 2016, Management of Technology - Step to Sustainable Production. Cosic, P. (ed.). Zagreb: Faculty of Transport and Traffic Sciences, University of Zagreb

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Entrepreneurship in Engineering Education. Graz University of Technology as a case study

Höller, H. & Vorbach, S., 2016, Proceedings of the 19th ICL Conference . p. 486-499 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Entwicklung einer Absorptionskältemaschine für die Nutzung der Abwärme einer Festoxidbrennstoffzelle

Albert, J. & Rieberer, R., 2016, Proc. Deutsche Kälte-Klima-Tagung 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Entwicklung und Erprobung einer thermisch angetriebenen Lösungsmittelpumpe für Ammoniak/Wasser-Absorptionswärmepumpen und -kältemaschinen

Arnitz, A. & Rieberer, R., 2016, Proc. Deutsche Kälte-Klima-Tagung 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Erforderliche Sauggasüberhitzung bei einer R600-Hochtemperaturwärmepumpe – Nutzung der Motorabwärme

Moisi, H. S. & Rieberer, R., 2016, Proc. Deutsche Kälte-Klima-Tagung 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Ergebnisse und Schlussfolgerungen zur Begleitforschung der Modellregion Elektromobilität Großraum Graz

Fabian, J., Wieland, T., Ernst, M., Schmautzer, E., Fickert, L., Slupetzky, W. & Schmied, R., 2016, Energie für unser Europa. Graz: Technische Universität Graz, p. 441-442

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Erste Untersuchungsergebnisse eines Rotationskolbenexpanders für den Einsatz in einer pelletsbefeuerten Mikro-KWK

Zotter, G., Archan, G. A. R., Rieberer, R. & Kalkgruber, J., 2016, Proc. 14. Symposium Energieinnovation.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Estimation of tire road friction during vehicle steering

Shao, L., Lex, C., Hackl, A. & Eichberger, A., 2016, Advanced Vehicle Control AVEC 16: Proceedings of the 13th International Symposium on Advanced Vehicle Control (AVEC’ 16). Edelmann, J., Plöchl, M. & Pfeffer, P. E. (eds.). CRC Press/Balkema

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Evaluation of a momentum based impact model and application in an effectivity study considering junction accidents

Kolk, H., Tomasch, E., Bakker, J., Dobberstein, J. & Sinz, W., 2016, International Conference "ESAR - Expert Symposium on Accident Research".

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

File

Expectations of Established Companies on Digital Fabrication Laboratories

Böhm, T., Karre, H. D., Friessnig, M. H. & Ramsauer, C., 1 Jun 2016, Management of Technology Step to Sustainable Production: Conference Proceedings. Croatian Association for PLM

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Expectations of Established Companies on Digital Fabrication Laboratories

Böhm, T., Karre, H. D., Friessnig, M. H. & Ramsauer, C., 1 Jun 2016, Management of Technology Step to Sustainable Production: Book of Abstracts. Croatian Association for PLM, p. 27

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Experimental analysis of the flow pattern of a pump turbine model in pump mode

Guggenberger, M., Senn, F., Jaberg, H., Gehrer, A., Sallaberger, M. & Widmer, C., 4 Jul 2016, IAHR Conference on Hydraulic machines and systems, Grenoble, 4-8 July 2016 : Publication in IOP Conference Series.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access

Experimental Investigation of Two Staged Wood-Chip Combustion in a Small-Scale Boiler and Development of a Fast Solving Numerical Simulation Approach

Buchmayr, M. & Hochenauer, C., 2016, Conference Proceedings of the 24th EUBCE.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Experimental investigations on single-sided CMT welding of hybrid aluminum-steel blanks

Silvayeh, Z., Vallant, R., Sommitsch, C., Götzinger, B. & Karner, W., 2016, Proceedings of the 10th International Conference on Trends in Welding Research. p. 32 - 35

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Welding
Aluminum
Intermetallics
Optical microscopy
Steel

Experimental Studies of Dual Fuel Combustion Modes for Heavy Duty Application

Barnstedt, K. D., Grabner, P. & Eichlseder, H., 23 Feb 2016, 3. Internationaler Motorenkongress 2016. p. 577-588 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Experimental Study on the Thermal Behavior of a Domestic Refrigeration Compressor during Transient Operation in a Small Capacity Cooling System

Hopfgartner, J. W., Heimel, M., Berger, E., Posch, S., Almbauer, R. & Stangl, S., 2016, 16th International Refrigeration and Air Conditioning Conference at Purdue.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Experimental validation of a non-linear first-order tyre dynamics approach

Hackl, A., Hirschberg, W., Lex, C. & Rill, G., 29 Apr 2016, The Dynamics of Vehicles on Roads and Tracks: 24th Symposium of the International Association for Vehicle System Dynamics (IAVSD 2015). Graz: CRC Press, Vol. 24. p. 443 452 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

tire
transducer
modeling
simulation
parameter

Experimental Validation of RVE Based Failure Simulations of Macro-Porous Materials

Krummich, P. D., Schneider, P. & Hochrainer, T., 2016, Proceedings in Applied Mathematics and Mechanics. 1 ed. Wiley-VCH , Vol. 16. p. 365-366

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Experimental Validation of the Maxwell Model for Description of Transient Tyre Forces

Hackl, A., Hirschberg, W., Lex, C. & Rill, G., Mar 2016, 16. Internationales Stutgarter Symposium: Automobil- und Motorentechnik. Springer Vieweg, Vol. 1. p. 401-418 18 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Experimentelle Untersuchung einer Gasabsorptionswärmepumpe unter Labor- und Feldtestbedingungen sowie Vergleich mit Simulationsergebnissen

Wechsler, R., Rieberer, R., Emhofer, J., Zottl, A. & Köfinger, C., 2016, Proc. Deutsche Kälte-Klima-Tagung 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Film breakup into rivulets on rotating disks

Line, H. B., Steiner, H., Engesser, P. & Brenn, G., 2016, Proc. 9th International Conference on Multiphase Flow 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Flat-plate boundary layers in accelerated flow

Bader, P., Pschernig, M., Sanz, W., Woisetschläger, J., Heitmeir, F., Meile, W. & Brenn, G., Jun 2016, Proceedings of ASME Turbo Expo 2016: Turbine Technical Conference and Exposition GT2016. GT2016-56044

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Flexible Parameterization Strategies in Automotive 3D Vehicle Layout

Hirz, M. & Rossbacher, P., 2016, CAD and A Conference 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Fortschritte bei Sondergasen - GE Gasmotoren mit hoher Leistung für wasserstoff- und kohlenmonoxidreiche Gase

Prankl, S., Trapp, C., Böwing, R., Zuschnig, A., Schiestl, S., Schneßl, E. & Wimmer, A., Sep 2016, Die Zukunft der Großmotoren IV. p. 227-243

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

From ICDP to (graphitized) HSS: Sophisiticated work roll grades for highest demands in rolling mills for flat products

Armin, P., Brandner, M., Trickl, T., Elizondo, L., Beal, C. & Sommitsch, C., 2016, 10th International Rolling Conference and the 7th European Rolling Conference . Buchmayr, B. (ed.). ASMET, Austrian Society for Metallurgy and Materials

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Future HD vehicle requirements due to legislation and effects on CO2 and air quality

Hausberger, S., Rexeis, M., Kies, A., Weller, K. & Silberholz, G., 2016, Internationaler Motorenkongress 2016. Liebl, J. & Beidl, C. (eds.).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Future methods for emission type-approval and certified CO2-labeling of heavy-duty hybrid vehicles in the EU

Silberholz, G. & Hausberger, S., 2016, 9th International Exhaust Gas and Particulate Emissions Forum.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Future trends in CAD – from the perspective of automotive industry

Hirz, M., Rossbacher, P. & Gavacova, J., 2016, CAD and A Conference 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Generative Engineering Design methodology used for the development of surface-based components

Gavacova, J., Gulan, L., Forrai, M. & Hirz, M., 2016, CAD and A Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Go2PI: Practically proved steps to implement the Physical Internet

Ehrentraut, F., Landschützer, C., Graf, H-C., Gasperlmair, A. & Hörtenhuber, S-T., 1 Jul 2016, IPIC2016: papers. 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

World Wide Web
Business model
Standardization
Service provider
New business

HCDESLib - A Generic Open Source Toolkit for Health Care Simulation

Furian, N., Neubacher, D., Vössner, S., O'Sullivan, M. & Walker, C., 26 Oct 2016, Proceedings of the 30th European Simulation and Modelling Conference. agEUROSIS-ETI Publication, p. 315 321 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

High speed visualization of the part load flow of an impeller in pump-mode

Guggenberger, M., Senn, F., Sallaberger, M. J., Gehrer, A. & Widmer, C., 13 Sep 2016, Pump Users International Forum 2016: Proceedings. Düsseldorf: VDMA, 12 p. 15-2

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

How path-dependent developments hinder technological change and innovation – A literature review

Wipfler, H., 3 Jul 2016, R&D Management Conference 2016: From Science to Society: Innovation and Value Creation. 17 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

How to Motivate Purchasing Professionals?

Zunk, B. M., 2016, International Scientific Conference ERAZ 2016 Conference Proceedings – Knowledge based sustainable economic development.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Identification of information gaps in civil-military cooperation in disaster management

Lichtenegger, G., Vorraber, W., Gojmerac, I., Sporer, A., Brugger, J., Exner, E., Aschbacher, H., Christian, M. & Voessner, S., 8 Feb 2016, Proceedings of the 2015 2nd International Conference on Information and Communication Technologies for Disaster Management, ICT-DM 2015. Institute of Electrical and Electronics Engineers, p. 122-129 8 p. 7402030

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

civil-military cooperation
information exchange
Interoperability
Disasters
disaster

Influence of Thermal History on the Hot Ductility of Ti-Nb Microalloyed Steels

Beal, C., Caliskanoglu, O., Sommitsch, C., Ilie, S., Six, J. & Dománková, M., 2016, Materials Science Forum. Trans Tech Publications Ltd., Vol. 879. p. 199 - 204

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Innovative transport concept through combined mobility based on multimodal nodes in the area of Graz

Kohla, B., Fabian, J. & Just-Moczygemba, E., 4 Apr 2016, Smart and Green Transitions in Cities and Regions. Graz, Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Integrale Gebäudehüllen - Entwicklung eines solarthermisch aktivierten, multifunktionalen Fassadenpaneels

Schober, H., Brandl, D., Kolany, G., Zellinger, M., Mach, T. & Englhardt, O., 2016, Gleisdorf Solar 2016, 12. Internationale Konferenz für solares Heizen und Kühlen - Konferenzband. Gleisdorf: AEE INTEC, p. 222 - 233

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Integration of New Urban Vehicles in Transport Systems and Mobility Concepts

Brunner, H., Hirz, M. & Walzel, B., 26 Sep 2016, FISITA World Automotive Congress - Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Integration of oxidative honeycomb catalysts in firewood stoves - Performance analysis, safety aspects and long term durability

Reichert, G., Schmidl, C., Hochenauer, C., Haslinger, W. & Stressler, H., 2016, 23. Europäische Biomassekonferenz. p. 452-456

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Internal Reforming of Synthetic Diesel Reformates on Ni-YSZ Anodes: A CFD-Based Catalyst Coverage Analysis

Schluckner, C., Subotić, V. & Hochenauer, C., 13 Apr 2016, Fuel Cells Science and Technology Conference 2016. Glasgow

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Introduction of a Project-Based-Course in Turbine Stage Design for Undergraduate Students at Graz University of Technology

Marn, A., Schönleitner, F., Peterleithner, J., Woisetschläger, J. & Heitmeir, F., 2016, Proceedings of the ASME Turbo Expo. p. GT2016-56071

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation and performance assessment of hydraulic schemes for the beam screen cooling for the Future Circular Collider of hadron beams

Brenn, G., Kotnig, C. & Tavian, L., 2016, Proc. 26th Int. Cryogenic Engineering Conf. - Int. Cryogenic Materials Conf. 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Key characteristics of agility in manufacturing

Dominik, W., Schurig, M., Rabitsch, C. & Ramsauer, C., 1 Jun 2016, Proceedings International Conference Management of Technology – Step to Sustainable Production. Croatian Association for PLM, p. 1-10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review