Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2020

Filter
Conference contribution
2015

Experimental Investigation of Carbon Formation on The Anode of A Large Planar ASC-SOFC

Subotic, V., Schluckner, C., Schröttner, H. & Hochenauer, C., 2015, 1st International Workshop on Hydrogen and Fuel Cells. ., p. 26-27

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Experimental investigation of the turbine instability of a pump-turbine during synchronization

Guggenberger, M., Senn, F., Schiffer, J., Jaberg, H., Sallaberger, M., Gentner, C. & Widmer, C., 2015, Volume 22: 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014) 22–26 September 2014, Montreal, Canada. Bristol, UK: IOP Publishing, p. 000-000 (Unsteady and Transient Phenomena).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Experimentations in line vibrations and associated drag for kites

Dunker, S., Meile, W. & Brenn, G., 2015, Proceedings 23rd AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar. ., p. AIAA2015-2154

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Experimentell basierte Modellierung und simulative Parameterstudie zum Betriebsverhalten einer gasbefeuerten Absorptionswärmepumpe

Wechsler, R. & Rieberer, R., 2015, Proc. Deutsche Kälte-Klima-Tagung 2015.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Experimentelle Untersuchung von Erdgas-Diesel Brennverfahren mit äußerer und innerer Gemischbildung für Pkw-Anwendungen

Sprenger, F. & Fasching, P., 2015, 15. Tagung Der Arbeitsprozess des Verbrennungsmotors. Eichlseder, H. & Wimmer, A. (eds.). Graz: Verlag der Technischen Universität Graz, p. 483-498 (VKM-THD Mitteilungen; vol. 99).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Extended lubrication theory for generalized Couette flow through converging gaps

Baric, E. & Steiner, H., 2015, 21st ERCOFTAC ADA PC Meeting. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Extended lubrication theory for generalized Couette flow through converging gaps

Steiner, H., Baric, E. & Brenn, G., 2015, Proceedings Conference of Modelling Fluid Flow (CMFF'15). ., p. Paper No.-42

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Fault Detection and Isolation for a Railway Vehicle by Evaluating Estimation Residuals

Jesussek, M. & Ellermann, K., 2015, Procedia IUTAM. Elsevier B.V., Vol. 13. p. 14-23

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Ferritische Phasenumwandlung zur Verbesserung der Kriecheigenschaften von martensitischen 9 - 13 % Cr Stählen

Plesiutschnig, E., Sommitsch, C., Zeiler, G. & Paul, S., 2015, 38. Vortragsveranstaltung Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe. Düsseldorf: Forschungsvereinigung Warmfeste Stähle und Hochtemperaturwerkstoffe, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Flow instabilities during hot deformation of titanium alloys and titanium matrix composites

Poletti, M. C., Halici, D. & Xue, S., 2015, (Accepted/In press) TMS Proceeding. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Fluid Flow and Heat Transfer calculations in a matrix of surface-mounted cubes

Basara, B., 2015, Proc. of the 1st Thermal and Fluid Engineering Summer Conference. ., p. FRESC-13177

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Fluid Flow in the Oil Pumping System of a Hermetic Compressor

Posch, S., Berger, E., Heimel, M., Hopfgartner, J. W., Almbauer, R. & Schöllauf, P., 2015, Proceedings of the International Conference on Compressors and their Systems 2015. ., p. 00-00

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Forschungserkenntnisse zum technischen Monitoring und Mobilitätsverhalten anhand der Modellregion für Elektromobilität im Großraum Graz

Fabian, J., Wieland, T., Schmautzer, E., Fickert, L., Slupetzky, W. & Schmied, R., 2015, (Accepted/In press) Internationale Energiewirtschaftstagung an der TU Wien. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Framework of Knowledge Based Design in Minibus Skeleton Development

Hussein, H. M. A., Farouk, K. & Hirz, M., 2015, Industry Academia Collaboration. Cairo: IAC, p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Further development of a method to reproduce highly dynamic force-distance based intrusion of vehicle side structure components

Teibinger, A., Marbler-Gores, H., Schluder, H., Conrad, V., Steffan, H. & Schmidauer, J., 2015, SAE Technical Paper No. 2015-01-1487. ., p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Further Development of GE's Jenbacher Gas Engines with Prechamber Combustion Concept

Grotz, M., Birgel, A., Böwing, R., Trapp, C., Schneßl, E. & Wimmer, A., 2015, Tagung Der Arbeitsprozess des Verbrennungsmotors. ., p. 69-86

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Geschäftsmodellinnovation in der Energiebranche. Neue Möglichkeiten bei dezentraler Energieerzeugung

Vorbach, S., Müller, C. & Marko, W. A., 2015, Innovation und Nachhaltigkeit. Strategisch-operatives Energie- und Ressourcenmanagement. München: Rainer Hampp Verlag, Vol. 6. p. 70-83

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

GE's J920 FleXtra Gas Engine – 60 Hz Application and Further Improvements for Low NOx Emissions

Birgel, A., Köberl, S., Böwing, R., Trapp, C., Wimmer, A. & Schneßl, E., 2015, Proceedings 9th Dessau Gas Engine Conference. ., p. 25-38

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Greifer-Kransystem statt Förderschnecke - zukunftsfähig

Landschützer, C., Ortner-Pichler, A., Jodin, D., Brunner, T. & Würcher, G., 2015, Österreichischer Biomassetag. Wien: Österreichischer Biomasse-Verband, p. 97-102

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Higher Education Landscape, Competence Profile and Career Paths of Industrial Engineers and Managers in Austria

Sadei, C. & Zunk, B. M., 2015, Conference Proceedings of the 16th EBES Conference - Istanbul. ., p. 53- 53

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Holistic approach for improved safety including a proposal of new virtual test conditions of small electric vehicles

Teibinger, A., Mayer, C., Dux, E., D'Addetta, G. A., Luttenberger, P., Wismans, J. & Willinger, R., 2015, SAE Technical Paper No. 2015-01-0571. ., p. 1-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Hybrid Element Façade - Thermal Engineering and Related Structural Evaluation of a Solar Activated Integral Panel

Schober, H., Brandl, D., Zellinger, M., Mach, T. & Englhardt, O., 2015, Advanced Building Skins - International Conference on Building Envelope Design and Technology: Conference Proceedings. Englhardt, O. (ed.). ., p. 89-101

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Identification method of longitudinal tyre characteristics based on real road driving

Kerschbaumer, A., Hirschberg, W. & Prezel, D., 2015, (Accepted/In press) 24th International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD). Boca Raton, Florida: CRC Press/Balkema

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Ignition and Combustion Model for Explicit Flame Tracking

Frolov, S. M., Ivanov, V. S., Basara, B., Priesching, P. & Suffa, M., 2015, Proceedings of the Int. Symp. Turbulence, Heat and Mass Transfer 8. Begell House Inc., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Impact of Passive Tip-Injection on Tip-Leakage Flow in Axial Low Pressure Turbine Stage

Ghaffari, P., Willinger, R., Bauinger, S. & Marn, A., 2015, ASME Turbo Expo 2015. ., p. 42226-1-42226-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Impact of the Air to Fuel Jet Momentum Ratio on the NOx Emissions of a Hydrogen Combustion Chamber

Mastrodonato, A. & Borm, O., 2015, Proceedings of the 7th European Combustion Meeting. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Implementing a highly dynamic Force Control on a Test Rig

Fischbäck, J., Mörwald, G. & Edler, J., 2015, Fluid Power 2015. Ljubljana: Tiskaran PRESENT d.o.o., p. 145-152

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Implizites Wissen und Sinneswahrnehmungen als Potentiale des "Faktor Mensch"

Lang, H., 2015, Design for X - Beiträge zum 26. DfX-Symposium. Hamburg: TuTech Verlag, Vol. 26. p. 323-332

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Increasing competitiveness when buying scarce raw material by exploiting the knowledge of customer’s attractiveness drivers

Marchner, M., Marchner, A., Grbenic, S. O. & Zunk, B. M., 2015, Conference Proceedings of the 16th EBES Conference - Istanbul. Eurasia Business and Economics Society , p. 46-47

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Indirekte Kälteanlage mit Wärmepumpenfunktion für Hybrid- und E-Fahrzeuge

Schrank, P., Rabl, B., Steiner, A., Hütter, M. & Rieberer, R., 2015, DKV-Tagungsbericht 2015 Dresden. ., p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Industry 4.0 and SMEs – A Procedure Model to Identify the Need for Action in Production Environments

Kleindienst, M. & Ramsauer, C., 2015, 12th Annual International Conference on SΜΕs, Entrepreneurship and Innovation: Management – Marketing – Economic - Social Aspects, 3rd Annual International Colloquium on Branding & 2nd Annual International Conference on Small Societies-Smal. ., p. 25-25

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Informatisierung in der Produktionsplanung und -steuerung: Eine simulationsbasierte Analyse der Auswirkungen am Beispiel der Fließfertigung

Wolfsgruber, C., 2015, Wissenschaftlicher Industrielogistikdialog. ., p. 81-92

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Innovations in descaling and deburring

Mortsch, M. & Schmid, A., 2015, Innovations in descaling and deburring. Switzerland: Trans Tech Publications Ltd., Vol. Vols 651-653 (2015). p. 1189-1196 (Key Engineering Materials).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

In-situ monitoring of thermal treatments and hot deformation of a γ-TiAl alloy by high energy X-Ray diffraction

Pyczak, F., Rackel, M., Gabrisch, H., Lorenz, U., Schreyer, A., Halici, D. & Stark, A., 2015, (Accepted/In press) HiMAT-2015. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Interactive Segmentation of Rock-Art in High-Resolution 3D Reconstructions

Poier, G., Zeppelzauer, M., Reinbacher, C., Breiteneder, T., Bischof, H. & Schulter, S., 2015, Proceedings of Digital Heritage 2015. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Interferometric investigation of the thermoacoustics in a swirl stabilized methane flame

Peterleithner, J., Marn, A. & Woisetschläger, J., 2015, Proceedings of the ASME Turbo Expo. p. 42743-42743

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Intralogistics Systems – Optimization of Energy Efficiency

Hafner, N. & Lottersberger, F., 2015, Proceedings of the XXI International Conference on Material Handling, Constructions and Logistics - MHCL'15. ., p. 145-150

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

INVESTIGATING THE DYNAMIC ASPECTS OF THE TURBINE INSTABILITY OF A PUMP TURBINE MODEL

Guggenberger, M., Senn, F., Schiffer, J., Jaberg, H., Sallaberger, M. & Widmer, C., 2015, Proceedings of 6th IAHR meeting of the Working Group. ., p. 285-290

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation and evaluation of the cold formability of the high-manganese TWIP steel X40MnCrAl19-2

Preininger, M., Kofler, M. & Kolleck, R., 2015, IDDRG 2015: Forming with Intelligence, Flexibility and Lightweight. Shanghai, China: ., p. 440-448

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of a Servo Valve with a Piezoelectric Pilot Stage

Edler, J. & Hochleitner, H., 2015, Fluid Power 2015. Ljubljana: Tiskaran PRESENT d.o.o., p. 255-262

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Investigation of Weld Seam Structures of Tailor Welded Blanks for Hot Stamping

Kolleck, R., Vollmer, R., Both, C. & Breuer, A., 2015, Key Engineering Materials ; 639. ., p. 235-242

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Kaplanturbine mit Ejektornutzung

Fritsch, R., Schiffer, J., Jaberg, H., Benigni, H. & Fritsch, R., 2015, 14. PRAKTIKER-KONFERENZ, WASSERKRAFT – TURBINEN – SYSTEME. ., p. 9999-9999

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

LEC-MCheck - Eine Methodik zur Fehlerdiagnose an Motorprüfständen

Wohlthan, M., Pirker, G., Krenn, M. & Wimmer, A., 2015, Tagung Der Arbeitsprozess des Verbrennungsmotors. ., p. 312-324

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Leistungssteigerung an Rundstahlkettenzügen

Landschützer, C., Weingärtner, J. & Wolfschluckner, A., 2015, Krane - Herausforderungen im Zeichen von Industrie 4.0. Dresden: Selbstverlag TU Dresden, p. 87-106

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Lubricated Non-Conformal Contact Model Used in Multi-Body Simulation of a Cam Follower Contact

Meuter, M., Offner, G. & Haase, G., 2015, Tribologie in Industrie und Forschung – Werkstoffe, Schmierstoffe und Technologie. ., p. 87-99

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

MAKING FABLABS SMART THROUGH SENSORS AND BIG DATA ANALYSIS

Böhm, T., Friessnig, M. H. & Ramsauer, C., 2015, Proceedings FAB 11. ., p. 10-15

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Management control systems in post-incubation of high-technology start-ups: Determination of relevance and design of a future study

Kerschenbauer, J., Mühlburger, H. & Grasser, D., 2015, Proceedings of the 24th IAMOT Conference. ., p. 415-433

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Measured Heat Transfer in a Transonic Fan Rig at Casing with Implications on Performance

Turner, M., Nemnem, A., Gannon, A., Hobson, G. V. & Sanz, W., 2015, ASME Turbo Expo. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Mit Standards Richtung Zukunft – Der Physical Internet Container

Ehrentraut, F., 2015, Digitalisierung in der Supply Chain - wie steuern wir wirkich. ., p. 19-28

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modal Analysis of Vehicle Power Trains

Haslinger, J., Offner, G., Sopouch, M. & Zinkiewicz, B., 2015, Proceedings of the International Association of Applied Mathematics and Mechanics. ., p. 53-54

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review