Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2020

Filter
Conference contribution
2015

A further enhancement of the PANS method for calculations with moving meshes or with transient boundaries

Basara, B. & Krajnovic, S., 2015, Proceedings of the Int. Symp. Turbulence, Heat and Mass Transfer 8. Begell House Inc., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A generic friction modelling approach for mixed lubricated journal bearings in internal combustion engines

Offner, G., Meuter, M. & Knaus, O., 2015, 11th VDI Fachtagung Gleit- und Wälzlagerungen. ., p. 161-172

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Methodology to Analyze Interoperability in Crisis and Disaster Management

Neubauer, G., Preinerstorfer, A., Jager, B., Humer, H., Lichtenegger, G. C., Vorraber, W., Linke, H., Tusa, G., Grüner, R., Dalaff, C., Huebner, K., Knezic, S. & Blaha, M., 2015, IDMINT 2015, Information Technology and Society - Interaction and Interdependence. Linz: Trauner Verlag, Vol. 44. p. 23-30 (Schriftenreihe Informatik).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

An Agent-Based Approach to reveal the Effects of Age-Related Contact Patterns on Epidemic Spread

Neubacher, D., Furian, N. & Vössner, S., 2015, Proceedings of the 2015 European Simulation and Modelling Conference. Ostend, Belgium: agEUROSIS-ETI Publication, p. 185-192

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Analyse eines Wärmepumpensystems mit Heißgasenthitzung für unterschiedliche Regelungs- und Hydraulikstrategien

Hengel, F., Heinz, A. & Rieberer, R., 2015, (Accepted/In press) e-nova 2015 Sustainable Buildings. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Analyse und Bewertung der Arbeitsprozesse von Kleinmotoren

Trattner, A., Kupelwieser, F., Pertl, P., Schmidt, S. & Winkler, F., 2015, The Working Process of the Internal Combustion Engine. ., p. 1-16

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Analysis and Development of Fail Operational Automotive Mechatronic Systems

Reinhofer, S., Ernst, M. & Fabian, J., 2015, International Conference on Advances in Software, Control and Mechanical Engineering. ., p. 36-42

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Analysis Methods in the Development Process of Mechatronic Drivetrain Systems with Special Focus on Automotive Software

Ernst, M., Erlachner, S., Hirz, M., Fabian, J. & Wotawa, F., 2015, Volume II. ., p. 63-68

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Analysis of a Directly Fired Small-Scale Absorption Heat Pump with Solution Recirculation and Multiple Feed of the Desorber

Wechsler, R. & Rieberer, R., 2015, Proc. International Congress of Refrigeration 2015.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Analytical Electron Tomographic Investigation of an Aluminium Alloy with Nano-Precipitates

Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C. & Kothleitner, G., 2015, ASEM Workshop Advanced Electron Microscopy. ., p. 39-39

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

An Autonomous Forklift for Battery Change in Electrical Vehicles

Kaltner, S., Gugler, J., Wonisch, M. & Steinbauer, G., 2015, (Accepted/In press) Austrian Robotics Workshop. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A new approach for combustion modeling of large dual-fuel engines

Krenn, M., Pirker, G., Redtenbacher, C. & Wimmer, A., 2015, MTZ-Fachtagung Heavy-Duty-, On- und Off-Highway-Motoren. ., p. 1-19

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A New Approach for Predicting the Maximum Fuel Saving Potential of an Automotive Thermoelectric Generator in its Early Development Stage

Bauknecht, A., Rexeis, M. & Almbauer, R., 2015, (Accepted/In press) Vehicle Thermal Management Systems Conference and Exhibition. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A New Approach to an Adaptive and Predictive Operation Strategy for PHEVs

Kraus, H., 2015, SAE Technical Paper 2015-01-1222. SAE International, p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Angepasste Bauteileigenschaften durch den Einsatz von Tailor Welded Blanks im Presshärten

Vollmer, R., Boskovic, V., Kolleck, R., Both, C. & Breuer, A., 2015, Tagungsband zum 10. Erlanger Workshop Warmblechumformung. ., p. 195-206

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Numerical Study On Carbon Formation In Porous SOFC Anodes, Yokohama, Japan

Schluckner, C., Subotic, V. & Hochenauer, C., 2015, 1st International Workshop on Hydrogen and Fuel Cells. Graz: Verlag der Technischen Universität Graz, p. 22-23

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Application of a Numerical Transfer Path Analysis Method for Noise Source Identification in Internal Combustion Engines

Acri, A., Offner, G., Nijman, E. & Rejlek, J., 2015, Proceedings of ICEDyn 2015. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Application of the Wave Based Method to steady-state vibrations of thick plates

Klanner, M. & Ellermann, K., 2015, Proceedings of ICoEV 2015 International Conference on Engineering Vibration. University of Ljubljana, Faculty of Mechanical Engineering, p. 163-172

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

A Quasi First Order Optimization Method and Its Demonstration on the Optimization of a U-Bend

Akin, M. B. & Sanz, W., 2015, ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Thermo-elasto-hydrodynamic Modelling Approach for Mixed Lubricated Journal Bearings in Internal Combustion Engines

Offner, G., Lorenz, N., Meuter, M. & Knaus, O., 2015, 11th VDI Fachtagung Gleit- und Wälzlagerungen. ., p. 149-160

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Auslegung und Simulation eines Kettenfahrwerkes

Haberer, C., Landschützer, C. & Wolfschluckner, A., 2015, DMK 2015. Dresden: Verlag der Wissenschaften GmbH, p. 631-641

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Bewertungsmethodik von integralen Sicherheitssystemen durch Kombination von Test und Simulation am Beispiel von Fußgängerunfällen

Tomasch, E., Sinz, W., Hoschopf, H., Kolk, H. & Steffan, H., 2015, 10. VDI-Tagung Fahrzeugsicherheit - Sicherheit 2.0. ., Vol. 2265. p. 157-169

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Biomasselogistik – innovative Ansätze zur bedarfsorientierten Versorgung von Hackgutfeuerungen

Ortner-Pichler, A., Rackl, M., Landschützer, C., Kessler, S., Jodin, D. & Günthner, W. A., 2015, 20. Fachtagung Schüttgutfördertechnik 2015. Magdeburg: LOGiSCH GmbH, p. 213-225

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Biomimetics applied to factory layout planning: Honeycombs as bio-inspiration to reduce internal transport costs in factories.

Tinello, D., Winkler, H., Jodin, D. & Toferer, M., 2015, XXI Triennial International conference on Material handling, constructions and logistics. ., p. 161-164

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Calculation of Control Edges with Simulation

Mörwald, G., Edler, J. & Tic, V., 2015, Fluid Power 2015. Ljubljana: Tiskaran PRESENT d.o.o., p. 249-254

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CO2 Reduction Potential of CFRP-Bodywork Concepts Considering Production and In-Use Phase

Schnöll, H. P., Brunner, H., Zottler, M., Hirz, M. & Ramsauer, C., 2015, Book of Abstracts - International Conference Management of Technology - Step to Sustainable Production. Zagreb: ., p. 39-39

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CO2 Reduction Potential of CFRP-Bodywork Concepts Considering Production and In-Use Phase

Schnöll, H. P., Brunner, H., Zottler, M., Hirz, M. & Ramsauer, C., 2015, Proceedings International Conference Management of Technology - Step to Sustainable Production. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparison of an Acoustically Optimized and an Aerodynamically Optimized Exit Guide Vane

Selic, T., Marn, A., Schönleitner, F., Broszat, D., Hoeger, M. & Heitmeir, F., 2015, 11th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics. ., p. 1-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comprehensive experimental and numerical analysis of instability phenomena in pump turbines

Gentner, C., Sallaberger, M., Widmer, C., Bobach, B-J., Jaberg, H., Schiffer-Rosenberger, J., Senn, F. & Guggenberger, M., 2015, Volume 22: 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014) 22–26 September 2014, Montreal, Canada. Bristol, UK: IOP Publishing, Vol. 22. p. 000-000 032046. (IOP Conference Series: Earth and Environmental Science; vol. 22).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access

Creep and damage investigations of MARBN welded joints

Schlacher, C., Dikovits, M., Sommitsch, C. & Mayr, P., 2015, (Accepted/In press) Advanced High-Temperature Materials Technology for Sustainable and Reliable Power Engineering. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Designing sustainable information systems for organizations operating in safety critical environments

Vorraber, W., Lichtenegger, G. C., Neubacher, D. & Vössner, S., 2015, Software Testing, Verification and Validation Workshops (ICSTW), 2015 IEEE Eighth International Conference on . Institute of Electrical and Electronics Engineers, p. 1-5

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Detailed characterization of solid and volatiles products from biomass torrefaction

Anca-Couce, A., Brunner, T. & Obernberger, I., 2015, Proceedings of the 23rd European Biomass Conference. ., p. 1035-1041

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Detection of blade mistuning in a low pressure turbine rotor resulting from manufacturing tolerances and differences in blade mounting

Schönleitner, F., Traußnig, L. M., Marn, A. & Heitmeir, F., 2015, SIRM. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development of a Data Model for an Innovative Analysis Method for Mechatronic Systems in the Field of Automotive Engineering

Dallinger, P., Ernst, M. & Fabian, J., 2015, (Accepted/In press) International Conference on Advances in Software, Control and Mechanical Engineering. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Diesel-Abgasnachbehandlungskonzepte für die Richtlinie LEVIII SULEV

Hadl, K., Eichlseder, H., Schutting, E., Beichtbuchner, A. & Bürgler, L., 2015, Proceedings. ., p. xxx-xxx

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Die Trocknung partikelbeladener Pasten

Brenn, G., Steiner, H., Planchette, C., Kondor, I. & Mercuri, A., 2015, Proceedings ProcessNet Meeting of Experts "Drying Technology''. ., p. 34-34

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Driving patterns reducing pollutant emission at traffic lights

Krajzewicz, D., Wagner, D., Woelki, M. & Dippold, M., 2015, ITS World Congress. ., p. 1-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dynamic Modeling Approach for a Continuous Moving Belt

Lorenz, N., Offner, G., Sopouch, M. & Ertl, O., 2015, Proceedings of the ECCOMAS Thematic Conference on Multibody Dynamics 2015. ., p. 320-333

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

ECO-Design in the Automotive Industry – Potentials and Challenges

Hirz, M. & Brunner, H., 2015, Proceedings International Conference Management of Technology - Step to Sustainable Production. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Effect of Melting on the Hot Ductility of Continuously Cast Steels

Caliskanoglu, O., Zamberger, S., Beal, C. & Sommitsch, C., 2015, The 6th International Congress on the Science and Technology of Steelmaking (ICS2015). Peking: China Machine Press, p. 512-515

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

EHEV - Eco Drive for Hybrid Electric Vehicles

Kies, A., 2015, Science Brunch Energieeffiziente Fahrzeugtechnologien. ., p. 38-47

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Einfluss unterschiedlicher Schweißverfahren auf Mikro-struktur und Zeitstandverhalten eines borlegierten 9Cr Stahls

Mayr, P., Nitsche, A. & Schlacher, C., 2015, (Accepted/In press) Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Enabling Flexibility in Business Models of Companies in High-Technology Industries

Müller, C., 2015, The XXVI ISPIM Innovation Conference – Shaping the Frontiers of Innovation Management. ., p. 1-15

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Enabling Flexibility in Business Models of Companies in High-Technology Industries

Müller, C. & Vorbach, S., 2015, XXVI ISPIM Innovation Converence - Shaping the Frontiers of Innovation Management. ., p. 49-49

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Entrepreneurial Intentions and Behaviours: Definitions and Factors Influencing Entrepreneurship in High-Technology

Soos, J., 2015, Proceedings of RENT 2015 - Research in Entrepreneurship and Small Business. ., p. 1-15

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Erkenntnisse zur Insassenkinematik aus dem aktuellen OM4IS Projekt

Huber, P., Kirschbichler, S., Prüggler, A. & Steidl, T., 2015, VDI-Tagung Fahrzeugsicherheit. ., p. 1-18

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Erstellung generischer Unfallszenarien für die Effektivitätsbewertung aktiver Sicherheitssysteme am Beispiel Notbremsassistent

Eichberger, A., Zukancic, A. & Wimmer, P., 2015, (Accepted/In press) SafetyWeek Aschaffenburg. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Erstellung generischer Unfallszenarien für die Effektivitätsbewertung aktiver Sicherheitssysteme am Beispiel Notbremsassistent

Eichberger, A., Zukancic, A. & Wimmer, P., 2015, 5. Jahrestagung der GMTTB (Gesellschaft für Medizinisch Technische Traumabiomechanik). ., p. 1-35

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Evaluation of the refurbishment potential for Francis turbines using CFD and optimisation techniques

Özcan, A. Ö., Duva, B. C., Benigni, H., Schiffer, J., Jaberg, H. & Mosshammer, M., 2015, Conference proceedings. Budapest: ., p. 9999-9999

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Expansion to Higher Efficiency – Experimental Investigations of the Atkinson Cycle in Small Combustion Engines

Pertl, P., Trattner, A., Stelzl, R., Lang, M., Schmidt, S. & Kirchberger, R., 2015, Engine Technology. ., p. xx-xx

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review