Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2020

Filter
Conference contribution

(Development of a Simple Calculation Method for Double Skin Facades, Status Report of WP4 of the BESTFAÇADE Project

Erhorn-Kluttig, H., Erhorn, H., Weiss, N., Waldner, R., Streicher, W., Heimrath, R., Hengsberger, H., Mach, T., Flammant, G., Loncour, X., Guarracino, G., Santamouris, M., Farou, I., Duarte, R., Blomsterberg, A. & Poirazis, H., 2006, European Conference on Energy Performance and Indoor Climate in Buildings. ., p. 978-983

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

100%!? – Verfügbarkeit und Anlagengröße

Trummer, W. & Jodin, D., 2015, Intralogistik 4.0?!. Graz: Verlag der Technischen Universität Graz, p. 159-178 (Logistikwerkstatt Graz).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

100% Flexibilität bei Pumpspeicheranlagen: Hydraulischer Kurzschluss als zusätzlicher Betriebsmodus – Simulation und Validierung

Mosshammer, M., 1 Mar 2016, 14. Symposium Energieinnovation: Energie für unser Europa. I. F. E. U. E. IEE. (ed.). Verlag der Technischen Universität Graz

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1D Heat Exchanger Simulation to Capture the Cycling Transients of Domestic Refrigeration Appliances Working with R600a

Berger, E., Heimel, M., Almbauer, R. & Lang, W., 2012, International Refrigeration and Air Conditioning Conference. ., p. X-X

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1D Simulation as an Element of an Efficient Methodology for Engine Concept Development

Dimitrov, D., Pirker, G., Schneßl, E. & Wimmer, A., 29 Jun 2016, Proceedings Trans&MOTAUTO '16. p. 92-96

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

3D CAD parametric design strategies with interlinked CAE reference object creation for the overall vehicle layout optimization in the early automotive concept phase

Rossbacher, P., Hirz, M. & Dietrich, W., 2010, Fisita World Congress. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

3D CFD Simulation of Diesel Ignited Large Gas Engines

Eder, L., Kiesling, C., Priesching, P., Pirker, G. & Wimmer, A., 26 Oct 2016, AVL Advanced Simulation Technologies Conference Germany 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

3D-CFD simulation of dual fuel combustion in a diesel ignited gas engine

Eder, L., Kiesling, C., Pirker, G., Priesching, P. & Wimmer, A., Apr 2017, IMEM 2017. 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

3-Dimensional CFD Analysis on the Suction Section of a Piston Compressor and its Potentiality to improve the COP

Abidin, Z. & Almbauer, R., 2003, (Submitted) Proceedings of the International Conference on Fluid and Thermal Energy Conversion 2003. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

3-Dimensional Simulation for Obtaining the Heat Transfer Correlations of a Thermal Network Calculation for a Hermetic Reciprocating Compressor

Almbauer, R., Burgstaller, A., Abidin, Z. & Nagy, D., 2006, (Submitted) International Compressor Engineering Conference at Purdue. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

3D-Modelling of Multiphase Transport Phenomena in PEM Fuel Cells

Fink, C., Breitschädel, B., Brenn, G., Tatschl, R. & Prenninger, P., 2008, Book of Abstracts. ., p. 60-60

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

3D multiphase CFD simulation of PEM fuel cells and experimental validation

Fink, C., Schmierdorfer, M., Hacker, V., Brenn, G. & Prenninger, P., 2008, Proc. Fuel Cell Seminar and Exposition. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

3D Simulation and Process Optimization of Laser Assisted Milling of Ti6Al4V

Zamani, H. A., Hermani, J-P., sonderegger, B. & Sommitsch, C., 2013, Procedia CIRP. Volume 8, Vol. Volume 8. p. 75-80 (Procedia CIRP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

3D vehicle dynamics simulation systems

Ambroz, M., Ciglaric, I. & Prebil, I., 2003, Konference Inovativna Avtomobilska Tehnologija = Conference Innovative Automotive Technology. Ljubljana: Fakulteta za strojništvo, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

4th International Physical Internet Conference, summary and key findings.

Landschützer, C., 14 Sep 2017, Tagungsband Internationaler Leobener Logistiksommer 2017. Leoben, 44 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

50Computation of laminar-turbulent transition in turbomachinery using an intermittency transport model

Pecnik, R., Sanz, W., Gehrer, A. & Woisetschläger, J., 2003, European Conference on Turbomachinery. ., p. 925-936

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

50Investigation of stator-rotor interaction in a transonic turbine stage using laser-doppler-velocimetry and pneumatic probes

Goettlich, E., Neumayer, F., Pieringer, P., Woisetschläger, J., Sanz, W. & Heitmeir, F., 2003, ASME Turbo Expo. ., p. x-y

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

8-achsiger Seilroboter als Handlingapplikation

von Zitzewitz, J., Faschinger, F. & Pernkopf, F., 2006, ifm 2006. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Abfall der Zeitstandfestigkeit bei langen Zeiten

Cerjak, H-H., Sonderegger, B., Kozeschnik, E., Rajek, H. J., Holzer, I., Mayr, P. & Pein, C., 2006, Die aktuellen Abwertungen bei hochwarmfesten Stählen und deren Konsequenzen für Auslegung und Bau hochmoderner Dampfkraftwerke. ., p. 1-1

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Abhängigkeit des Reibungskoeffizienten von Bremsscheibentemperatur, Bremsdruck und Fahrzeuggeschwindigkeit

Tonchev, A. A. & Hirschberg, W., 2006, UNITECH International Scientific Conference, Gabrovo. Gabrovo: University publishing house V.Aprilov, Vol. Volume 1. p. 517-521

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Ab initio flight training in a network of simulators: chances and challenges

Koglbauer, I. V., Braunstingl, R., Riesel, M. & Braunstingl, D., 2014, Proceedings of the 31st EAAP Conference. ., p. 507-511

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

About low emission combustion with replacement fuels (Paper review)

Rajamaeki, J., Giuliani, F., Fritzer, J. & Heitmeir, F., 2013, International Symposium on Air Breathing Engines. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

About the Identification of Tyre Characteristics Based on Vehicle Dynamics Measurements

Kerschbaumer, A., Kollreider, D., Prettenthaler, C., Hirschberg, W., Schagerl, G. & Peinsitt, M., 2010, (Accepted/In press) Internationales Stuttgarter Symposium Automobil- und Motorentechnik. ATZlive GWV Fachverlage GmbH, Vol. 1. (10th Stuttgart International Symposium Automotive and Engine Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

About the influence of the truck on a driver's performance

Tengg, W., Weinfurter, H., Prettenthaler, C., Hirschberg, W., Haas, J. & Danner, C., 2011, 13th EAEC European Automotive Congress. ., p. 1-14

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

About the onset of partload instability of swept and unswept axoal pump blades

Jaberg, H. & Forstner, M., 2003, Conference Proceedings / Conference on Modelling Fluid Flow, Vol. II. Budapest: ., p. 1003-1009

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Abschätzung der Energieperformance in frühen Planungsphasen und Architekturwettbewerbe

Treberspurg, M., Djalili, M., Smutny, R., Gratzl-Michlmair, M., Mach, T., Staller, H. & Tritthart, W., 2010, Internationale Passivhaustagung. Darmstadt: PHI, p. ?-?

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Absorption/Compression Cycle for High Temperature Heat Pumps - Simulation Model, Prototype Design and Initial Experimental Results

Hannl, D. & Rieberer, R., 2014, Proceedings 11th IEA Heat Pump Conference. ., p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Absorption Heat Pump – from Single-Stage to GAX

Halozan, H., Li, Y. & Rieberer, R., 2004, (Submitted) 6th IIR-Gustav Lorentzen Conference on Natural Working Fluids. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Absorptions/Kompressions-Wärmepumpe mit dem Arbeitsstoffgemisch Ammoniak/Lithiumnitrat für Hochtemperaturanwendung - Erste Betriebserfahrungen und Ergebnisse

Hannl, D. & Rieberer, R., 2014, DKV-Tagungsbericht 2014 Düsseldorf. ., p. 1-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Abstimmung der Fahrzeug-Längsdynamik im virtuellen Fahrversuch

Kollreider, A., 2005, Simulation und Test in der Funktions- und Steuergeräteentwicklung. expert verlag GmbH , p. IMDRUCK-IMDRUCK

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Abwärmenutzung von Biogasanlagen mit Niedertemperatur Organic Rankine Cycle

Schuster, A., Brückner, T. & Karl, J., 2007, 15. Symposium Bioenergie. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Academic entrepreneurship in high-technology in Austria

Soos, J. & Kerschenbauer, J., May 2016, IAMOT 2016 Conference Proceedings. p. 78-93 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Academic teaching at digital fabrication laboratories in the field of mechanical engineering

Karre, H. D., Böhm, T., Friessnig, M. H. & Ramsauer, C., 4 Jul 2016, EDULEARN16 Proceedings: 8th International Conference on Education and New Learning Technologies. International Association of Technology, Education and Development (IATED), p. 8844 - 8853 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

mechanical engineering
Teaching
education
engineering
student

A Case Study based Digitalization Training for Learning Factories

Hulla, M. U., Hammer, M., Karre, H. D. & Ramsauer, C., Apr 2019, Research. Experience. Education. 9th Conference on Learning Factories 2019 . Niederlande: Elsevier B.V., Vol. 31. p. 169-174 5 p. (Procedia Manufacturing; vol. 31).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A case study derived methodology to create a roadmap to realize the Physical Internet for SME

Ehrentraut, F., Landschützer, C., Jodin, D., Graf, H-C. & Gasperlmair, A., 1 Jul 2016, IPIC2016: papers. 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Internet
Logistics
Computer operating systems
Supply chains
Industry

A Case Study of a Holistic Customer Rating Model

Koch, V., Marchner, M. & Zunk, B. M., 2013, Proceedings of the 2013 Winter Global Business Conference (GBC). ., p. 125-137

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Accident Reconstruction with PC Crash - A multifunctional program for accident investigators

Tomasch, E., Steffan, H., Moser, A. & Hoschopf, H., 2006, Accident Reconstruction with PC Crash - A multifunctional program for accident investigators. ., p. N.A.-N.A.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Accounting Practice in Austria: The Entry of Routine Accounting Transactions

Grbenic, S. O., 2018, Proceedings of the 2nd International Scientific Conference on Economics and Management (EMAN 2018). Belgrade, Serbia: Association of Economists and Managers of the Balkans

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Accuracy of exhaust emissions measurements von vehicle bench

Joumard, R., Laurikko, J., Le Anh, T., Geivanidis, S., Samaras, Z., Oláh, Z., Devaux, P., André, J-M., Cornelis, E., Rouveirolles, P., Lacour, S., Prati, M. V., Vermeulen, R. & Zallinger, M. S., 2006, Environment & Transport - Transport and Air Pollution. ., p. 119-126

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Accuracy of Friction Estimation during Driving

Kobialka, H-U. & Lex, C., 2013, Conference Design of Experiments (DOE) in Engine Development. Renningen: expert verlag GmbH , p. 190-197 (Design of Experiments (DoE) in Engine Development).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Friction
Sensors
Recurrent neural networks
Tires
Time series

Accurate black-grey box identification method for servohydraulic cylinder systems in multi axis test applications

Li, L. & Thurner, T., 2013, Proceedings of International Conference Fluid Power 2013. ., p. 201-210

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Accurate Position Control of a Servo-Hydraulic Test Cylinder by Iterative Learning Control Technique

Li, L., Poms, U. R. & Thurner, T., 2014, Proceedings of the UKSim-AMSS Eighth European Modelling Symposium. ., p. 297-302

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A cfd-method for the analysis and optimization of the fixed bed conversion in biomass grate furnaces

Singer, M., Mehrabian, R., Gruber, T., Anca-Couce, A. & Scharler, R., 1 Jan 2019, European Biomass Conference and Exhibition Proceedings. Vol. 27. p. 688-693 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

furnaces
combustion
Biomass
Furnaces
Sensitivity analysis

Achieving corporate objectives of companies by motivating purchasing professionals on a micro level

Koch, V., 2015, Proceedings of the 24th International Purchasing and Supply Education and Research Association (IPSERA). ., p. 20-27

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A CNN hardware-only approach to speed measurement

Malki, S., Deepak, G., Mohanna, V., Ringhofer, M. & Spaanenburg, L., 2006, Proceedings SSoCC. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

A Comparative Simulation Study of Solar Flat-Plate Collectors Directly and Indirectly Integrated into the Building Envelope

Metzger, J., Matuska, T. & Schranzhofer, H., 2009, Building Simulation 2009. ., p. 805-810

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A comparison of CFD-calculations and measurements of the fluid flow in Rotating Displacement Pumps

Schiffer, J., 2012, International Rotating Equipment Conference. ., p. 417-426

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Comparison Study of Active Head Restraints for Neck Protection in Rear-End Collisions

Bigi, D., Heilig, A., Steffan, H. & Eichberger, A., 1998, Proceeedings of the 16th ESV Conference, 1998. ., p. 1103-1110

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

A Competence Profile for Management Accountants to Support Industrial Buyer-Seller Relationship Management

Zunk, B. M., Uitz, I., Grbenic, S. O. & Bauer, U., 2012, EBES 2012 Istanbul Conference Abstract Book. Istanbul: EBES Publications, p. 72-73

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Comprehensive Approach on the Development and Improvement of 9-12% Cr Steels

Weinert, P., Dimmler, G., Letofsky, E., Sonderegger, B., Rajek, H. J. & Cerjak, H-H., 2002, 28th MPA-Seminar. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review