• 8010

    Inffeldgasse 18 Graz

    Austria

Research Output 1992 2020

Filter
Poster
2018

Loss-Surface--Based Iron Loss Prediction for Fractional Horsepower Electric Motor Design

Grübler, H., Krall, F., Leitner, S. & Muetze, A., 18 Sep 2018.

Research output: Contribution to conferencePosterResearchpeer-review

2017

Christian Doppler Laboratory for Brushless Drives for Pump and Fan Applications

Grübler, H., Leitner, S., Mütze, A. & Schöner, G., 2017.

Research output: Contribution to conferencePosterResearch

Fans
Pumps
Electric drives
Hydraulics

Foil conductor concentrated coil windings for modular permanent magnet AC machines

Rios, M., Venkataramanan, G. & Mütze, A., Oct 2017, p. 1191 - 1196.

Research output: Contribution to conferencePosterResearchpeer-review

GriDConv: HVDC-DC Converter for High Voltage Direct Current Transmission Systems – Background and Design

Krischan, K., Schichler, U., Deutschmann, B., Reichhartinger, M., Auinger, B., Vollmaier, F., Horn, M. & Renner, H., 26 Apr 2017. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

GriDConv: HVDC-DC Converter for High Voltage Direct Current Transmission Systems – The Electronic System

Deutschmann, B., Auinger, B., Vollmaier, F., Krischan, K., Schichler, U., Horn, M., Reichhartinger, M. & Renner, H., 26 Apr 2017, p. 42. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Improved Switching Strategy for a Single-Phase Brushless Direct Current Motor and its Impact on Motor Efficiency

Grübler, H., Leitner, S., Mütze, A. & Schöner, G., 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Magnetic properties and their relation to the no-load noise and no-load losses of large power transformers

Tanzer, T., Pregartner, H., Mütze, A. & Krischan, K., 21 May 2017, p. 1-6.

Research output: Contribution to conferencePosterResearchpeer-review

Magnetostriction and its relation to the no-load noise of power transformers

Tanzer, T., Pregartner, H. & Mütze, A., 21 May 2017, p. 1-6.

Research output: Contribution to conferencePosterResearchpeer-review

Performance enhancement of a modular test system for power semiconductors for HTOL testing by use of an embedded system

Sleik, R., Glavanovics, M., Krischan, K. & Mütze, A., 11 Sep 2017, p. 1-8.

Research output: Contribution to conferencePosterResearchpeer-review

Small-Signal Stability Analysis of an Inverter-Based Microgrid with Internal Model–Based Controllers

Leitner, S., Yazdanian, M., Mehrizi-Sani, A. & Mütze, A., 2017.

Research output: Contribution to conferencePosterResearch

2016

A two-step analytic design and optimization of small variable speed PMSMs for home appliances

Martinez Garcia Tenorio, J., Krischan, K. & Mütze, A., Sep 2016. 10 p.

Research output: Contribution to conferencePosterResearchpeer-review

Domestic appliances
Rotors
Iron
Electric motors
Stators

Control implementation for a wide voltage range high efficiency power supply utilizing low voltage MOSFETs

Konrad, W., Deboy, G. J. & Mütze, A., 20 Mar 2016.

Research output: Contribution to conferencePosterResearch

Experimental determination of specific power losses and magnetostriction of electrical steel coils

Tanzer, T., Mütze, A. & Krischan, K., 2016, p. 1.

Research output: Contribution to conferencePosterResearch

Magnetostriction
Steel

Experimental determination of specific power losses and magnetostriction of electrical steel coils

Tanzer, T., Pregartner, H., Mütze, A. & Krischan, K., 2016, p. 2230-2236.

Research output: Contribution to conferencePosterResearchpeer-review

Magnetostriction
Steel
Inspection
Fluxes

Impacts of Voltage Dips on the Behavior of Single Phase Induction Machines

Bacher, J. P. & Mütze, A., 2016, p. 452. 457 p.

Research output: Contribution to conferencePosterResearchpeer-review

Thermal performance modeling of foil wound concentrated coils in electric machines

Rios, M. & Mütze, A., Sep 2016, p. 1-8.

Research output: Contribution to conferencePosterResearchpeer-review

Influence of Different Cutting Techniques on the Magnetic Characteristics of Electrical Steels Determined by a Remagraph

Bali, M., 10 May 2015, p. 1190. 1196 p.

Research output: Contribution to conferencePosterResearchpeer-review

2014

A simple SiC JFET based AC variable current limiter

Krischan, K., 2014.

Research output: Contribution to conferencePosterResearch

Influence of Machine Integration on the Thermal Behavior of a PM Drive for Hybrid Electric Traction

Paar, C. J., Kolbe, H. & Mütze, A., 2014.

Research output: Contribution to conferencePosterResearch

2013

Design constraints of small single-phase permanent magnet brushless DC drives for a cooling application

Dunkl, S., 2013.

Research output: Contribution to conferencePosterResearch

Finite-Element Modelling of Magnetic Material Degradation due to Punching

Bali, M. S. J., 2013.

Research output: Contribution to conferencePosterResearch

Multi-domain modeling of a small single-phase brushless DC fan motor drive

Dunkl, S., 2013.

Research output: Contribution to conferencePosterResearch

2012

A Method for Electrically Isolated Voltage Measurement in PWM Inverters

Krischan, K., 2012.

Research output: Contribution to conferencePosterResearch

Computation of rotating force waves in skewed induction machines using multi-slice models

Weilharter, B., Biro, O., Rainer, S. & Stermecki, A., 2012.

Research output: Contribution to conferencePosterResearch

CONSIDERATION OF STEEL DEGRADATION DUE TO MANUFACTURING PROCESSES

Bali, M. S. J., 2012.

Research output: Contribution to conferencePosterResearch

Efficiency determination of standard asynchronous machines from start-up data

Bacher, J. P. & Waldhart, F., 2012.

Research output: Contribution to conferencePosterResearch

Modeling, Analysis and Design Optimization of a Brushless DC Motor

Dunkl, S., 2012.

Research output: Contribution to conferencePosterResearch

Modeling eddy current losses in the clamping plate of large synchronous generators

Waldhart, F., Bacher, J. P. & Maier, G., 2012.

Research output: Contribution to conferencePosterResearch

Numerical and Experimental Investigations of the Structural Characteristics of Stator Core Stacks

Mair, M., Weilharter, B., Rainer, S., Ellermann, K. & Biro, O., 2012.

Research output: Contribution to conferencePosterResearch

Performance Comparison of Voltage- Source Inverters for Use with Distributed Energy Systems

Krischan, K., 2012.

Research output: Contribution to conferencePosterResearch

2011

A Method for Electrically Isolated Voltage Measurement in PWM Inverters

Krischan, K., 2011.

Research output: Contribution to conferencePosterResearch

Frequency Domain Evaluation of Transient Finite Element Simulations of Induction Machines

Rainer, S., Biro, O., Stermecki, A. & Weilharter, B., 2011.

Research output: Contribution to conferencePosterResearch

HARMONIC EMISSIONS OF DOUBLY FED INDUCTION MACHINES FOR WIND POWER PLANTS

Handgruber, P., Ofner, G. & Seebacher, R., 2011.

Research output: Contribution to conferencePosterResearch

Numerical investigation of the 3D vibrational behaviour of skewed induction machines due to rotating force waves

Weilharter, B., Biro, O. & Rainer, S., 2011.

Research output: Contribution to conferencePosterResearch

Performance Comparison of Voltage-Source Inverters for Use with Distributed Energy Systems

Krischan, K., 2011.

Research output: Contribution to conferencePosterResearch

2010

Advanced Iteration for a Magnetic Equivalent Circuit and Modeling a 3-Phase Transformer

Ortner, M. G., Seebacher, R. & Krischan, K., 2010.

Research output: Contribution to conferencePosterResearch

Computation of rotating force waves in induction machines using multi-slice models

Weilharter, B., Biro, O. & Rainer, S., 2010.

Research output: Contribution to conferencePosterResearch

Computation of the Noise Radiation of an Induction Machine Using 3D FEM/BEM

Weilharter, B., Biro, O., Lang, H. & Rainer, S., 2010.

Research output: Contribution to conferencePosterResearch

Design of small potable water power plants, with regard to grid connection and efficiency

Schuster, T., Dannerer, G. & Krischan, K., 2010.

Research output: Contribution to conferencePosterResearch

Numerical Determination of Field and Rotor Current Harmonics in Induction Machines

Rainer, S., Biro, O., Stermecki, A. & Weilharter, B., 2010.

Research output: Contribution to conferencePosterResearch

Smart Safety / Smart Emergency

Fickert, L., Schmautzer, E., Aigner, M., Raunig, C. & Wakolbinger, C., 2010.

Research output: Contribution to conferencePosterResearch

Validation of a comprehensive analytic approach to determine the noise behaviour of induction machines

Weilharter, B., Biro, O., Ofner, G., Lang, H. & Rainer, S., 2010.

Research output: Contribution to conferencePosterResearch