Unsteady CFD simulation of a turning mid turbine frame with embedded design

Pascal Bader, Wolfgang Sanz, Rosario Spataro

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem KonferenzbandBegutachtung

Abstract

This paper discusses the unsteady CFD simulation results of a new concept of an intermediate turbine duct between the high and low pressure turbine of a jet engine. In order to meet the requirements of future jet engines it is helpful to supply the S-shaped intermediate turbine duct with struts carrying the bearing loadings. These struts can be aerodynamically optimized to generate swirl in order to replace the first vane row of the subsequent low pressure rotor. In such a design large flow structures coming from the outlet of the transonic high pressure stage are transported towards the low pressure rotor and are superimposed by secondary flows generated by the turning struts within the duct. These effects lead to a very inhomogeneous flow reaching the downstream low pressure rotor which leads to higher losses of this rotor. In order to reduce the fluctuations behind the S-shaped duct and to homogenize the flow, the duct can be equipped with splitters. Such an embedded design can homogenize the duct outlet flow, thus improving efficiency. In this paper the results of a steady and unsteady CFD simulation of such a turning mid turbine frame with splitters as experimentally investigated in the transonic test turbine facility at the Institute for Thermal Turbomachinery and Machine Dynamics of Graz University of Technology are discussed. A special focus is laid on the interaction between the high pressure stage and the intermediate turbine duct and the thus induced unsteady effects. Expected differences between the steady and unsteady simulation are shown. Additionally the positive effect of the splitters on the uniformity of the flow is investigated.

Originalspracheenglisch
Titel11th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2015
Seiten1-13
PublikationsstatusVeröffentlicht - 2015
VeranstaltungEuropean Conference on Turbomachinery Fluid Dynamics and Thermodynamics: ECT11 - Madrid, Spanien
Dauer: 23 März 201527 März 2015

Konferenz

KonferenzEuropean Conference on Turbomachinery Fluid Dynamics and Thermodynamics
Land/GebietSpanien
OrtMadrid
Zeitraum23/03/1527/03/15

ASJC Scopus subject areas

  • Werkstoffmechanik
  • Physik der kondensierten Materie

Fields of Expertise

  • Mobility & Production

Treatment code (Nähere Zuordnung)

  • Theoretical

Fingerprint

Untersuchen Sie die Forschungsthemen von „Unsteady CFD simulation of a turning mid turbine frame with embedded design“. Zusammen bilden sie einen einzigartigen Fingerprint.

Dieses zitieren