Projekte pro Jahr
Abstract
Light Detection and Ranging (LiDAR) will be one of the key enablers of smart mobility. Smart mobility creates a fully connected urban environment with graceful benefits for the city such as quality of life, reduced costs and more efficient energy usage. Modern LiDAR systems that are constructed for the automotive industry are using Micro-Electro-Mechanical Systems (MEMS) mirrors. In general, these mirrors are operated independently as a single device from a control system called MEMS Driver. In future, a synchronous mode for independent controlled MEMS mirrors will be crucial for novel applications such as synchronously operating a scanning receiver and emitter. In this paper we present a feasibility study about controlling multiple independent MEMS mirrors synchronously. For this purpose we created a novel Master-Slave system architecture model that enables synchronization. This proof-of-concept design of the Master-Slave system architecture were implemented in two FPGAs to evaluate the feasibility of synchronizing multiple independent MEMS mirrors.
Originalsprache | englisch |
---|---|
Seiten (von - bis) | 31-36 |
Seitenumfang | 6 |
Fachzeitschrift | IFAC-PapersOnLine |
Jahrgang | 52 |
Ausgabenummer | 15 |
DOIs | |
Publikationsstatus | Veröffentlicht - 1 Sept. 2019 |
Veranstaltung | 8th IFAC Symposium on Mechatronic Systems, MECHATRONICS 2019 - Vienna, Österreich Dauer: 4 Sept. 2019 → 6 Sept. 2019 |
ASJC Scopus subject areas
- Steuerungs- und Systemtechnik
Fingerprint
Untersuchen Sie die Forschungsthemen von „Towards synchronous mode of multiple independently controlled MEMS mirrors“. Zusammen bilden sie einen einzigartigen Fingerprint.-
Hardware/Software-Codesign
Steger, C., Seifert, C., Stelzer, P., Fiala, G. & Basic, F.
1/01/95 → …
Projekt: Arbeitsgebiet
-
PRYSTINE - Programmierbare Systeme für die Intelligenz in Automobilen
Steger, C., Strasser, A. & Stelzer, P.
1/05/18 → 30/04/21
Projekt: Forschungsprojekt
Aktivitäten
- 1 Vortrag bei Konferenz oder Fachtagung
-
Towards synchronous mode of multiple independently controlled MEMS mirrors
Philipp Stelzer (Redner/in)
4 Sept. 2019 → 6 Sept. 2019Aktivität: Vortrag oder Präsentation › Vortrag bei Konferenz oder Fachtagung › Science to science