The influence of hydrogen sulfide contaminations on hydrogen production in chemical looping processes

Publikation: Beitrag in einer FachzeitschriftArtikel


Chemical looping with iron-based oxygen carriers enables the production of hydrogen from various fossil and biogenic primary energy sources. In applications with real producer gases, such as biogas or gasified biomass, hydrogen sulfide represents one of the most challenging contaminants. The impact of H2S on the reactivity of a Fe2O3/Al2O3 oxygen carrier material in chemical looping hydrogen production was investigated in the present work. First, potential sulfur deactivation mechanisms are discussed in detail on the basis of thermodynamic data. Afterwards, an experimental study in a fixed-bed reactor system gave experimental evidence on the fate of sulfur in chemical looping hydrogen systems. The chemisorption of hydrogen sulfide (H2S) was identified as the main cause for the accumulative adsorption of H2S in the reduction phase and was confirmed by ex-situ ICP-EOS analysis. In the subsequent steam oxidation step, significant quantities of H2S were released resulting in an undesirable contamination of the hydrogen product gas. The reason was found as weakened sulfur bonds through increasing reactor temperatures caused by the exothermic oxidation reactions. In additional air oxidation steps no further contaminants as sulfur dioxide were identified. A profound interpretation was achieved through the fulfillment of the overall sulfur mass balance within a mean deviation of 3.7%. Quantitative investigations showed that the hydrogen consumption decreased by 12% throughout the reduction phase in the event of 100 ppm H2S in the feed gas.
PublikationsstatusVeröffentlicht - 1 Jan 2022

Fields of Expertise

  • Mobility & Production


Untersuchen Sie die Forschungsthemen von „The influence of hydrogen sulfide contaminations on hydrogen production in chemical looping processes“. Zusammen bilden sie einen einzigartigen Fingerprint.

Dieses zitieren