The influence of boron on the microstructure of a9wt% Cr ferritic steel

Mihaela Albu, Peter Mayr, Francisca Mendez Martin, Gerald Kothleitner

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Abstract

A comprehensive investigation of the microstructural evolution during heat treatment and creep exposure of a boron-alloyed 9wt% Cr steel, with special emphasis on the role of boron was performed. Samples from different stages of the normalizing and tempering heat treatment cycle, as well as creep tested material were investigated by energy filtered and high resolution transmission electron microscopy combined with electron energy loss- and X-ray-spectroscopy. The substitution of carbon by boron in chromium carbides was found only after 50 hours long-term tempering at 780°C and creep exposure at 650°C for 8,971 hours. No enrichment in boron on the particle matrix interface was detected. Nevertheless, formation of boron-rich carbides B0.38C0.62 and BC0.38Si0.04 was already observed after 4 hours of tempering.
Originalspracheenglisch
Seiten (von - bis)120-125
FachzeitschriftMaterials at high temperatures
Jahrgang28
PublikationsstatusVeröffentlicht - 2014

ASJC Scopus subject areas

  • !!Materials Science(all)

Fields of Expertise

  • Advanced Materials Science

Treatment code (Nähere Zuordnung)

  • Basic - Fundamental (Grundlagenforschung)

Dies zitieren

The influence of boron on the microstructure of a9wt% Cr ferritic steel. / Albu, Mihaela; Mayr, Peter; Mendez Martin, Francisca; Kothleitner, Gerald.

in: Materials at high temperatures, Jahrgang 28, 2014, S. 120-125.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

@article{f043242e0862462ea58fd56fc95a8afc,
title = "The influence of boron on the microstructure of a9wt{\%} Cr ferritic steel",
abstract = "A comprehensive investigation of the microstructural evolution during heat treatment and creep exposure of a boron-alloyed 9wt{\%} Cr steel, with special emphasis on the role of boron was performed. Samples from different stages of the normalizing and tempering heat treatment cycle, as well as creep tested material were investigated by energy filtered and high resolution transmission electron microscopy combined with electron energy loss- and X-ray-spectroscopy. The substitution of carbon by boron in chromium carbides was found only after 50 hours long-term tempering at 780°C and creep exposure at 650°C for 8,971 hours. No enrichment in boron on the particle matrix interface was detected. Nevertheless, formation of boron-rich carbides B0.38C0.62 and BC0.38Si0.04 was already observed after 4 hours of tempering.",
author = "Mihaela Albu and Peter Mayr and {Mendez Martin}, Francisca and Gerald Kothleitner",
year = "2014",
language = "English",
volume = "28",
pages = "120--125",
journal = "Materials at high temperatures",
issn = "0960-3409",
publisher = "Maney Publishing",

}

TY - JOUR

T1 - The influence of boron on the microstructure of a9wt% Cr ferritic steel

AU - Albu, Mihaela

AU - Mayr, Peter

AU - Mendez Martin, Francisca

AU - Kothleitner, Gerald

PY - 2014

Y1 - 2014

N2 - A comprehensive investigation of the microstructural evolution during heat treatment and creep exposure of a boron-alloyed 9wt% Cr steel, with special emphasis on the role of boron was performed. Samples from different stages of the normalizing and tempering heat treatment cycle, as well as creep tested material were investigated by energy filtered and high resolution transmission electron microscopy combined with electron energy loss- and X-ray-spectroscopy. The substitution of carbon by boron in chromium carbides was found only after 50 hours long-term tempering at 780°C and creep exposure at 650°C for 8,971 hours. No enrichment in boron on the particle matrix interface was detected. Nevertheless, formation of boron-rich carbides B0.38C0.62 and BC0.38Si0.04 was already observed after 4 hours of tempering.

AB - A comprehensive investigation of the microstructural evolution during heat treatment and creep exposure of a boron-alloyed 9wt% Cr steel, with special emphasis on the role of boron was performed. Samples from different stages of the normalizing and tempering heat treatment cycle, as well as creep tested material were investigated by energy filtered and high resolution transmission electron microscopy combined with electron energy loss- and X-ray-spectroscopy. The substitution of carbon by boron in chromium carbides was found only after 50 hours long-term tempering at 780°C and creep exposure at 650°C for 8,971 hours. No enrichment in boron on the particle matrix interface was detected. Nevertheless, formation of boron-rich carbides B0.38C0.62 and BC0.38Si0.04 was already observed after 4 hours of tempering.

M3 - Article

VL - 28

SP - 120

EP - 125

JO - Materials at high temperatures

JF - Materials at high temperatures

SN - 0960-3409

ER -