The Combination of Electron Microscopy, RamanMicroscopy and Energy Dispersive X-Ray Spectroscopyfor the Investigation of Polymeric Materials

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Abstract

Polymers play an important role in materials science, because of their
advantages over other types of materials. The huge variety in terms of the
types, arrangements and combinations of monomers found in polymers leads
to an extremely wide diversity of different polymeric materials. Although there
is a wide range of analytical techniques to characterize polymeric materials,
here the focus is laid on a novel correlative microscopy method, combining
Raman microscopy, scanning electron microscopy (SEM) and energy dispersive
X-ray spectroscopy (EDXS). Therefore, three polymeric specimens were
analysed by the new system RISE (Raman Imaging and Scanning Electron
microscopy) in combination with EDXS. The aim of this contribution is to
demonstrate the potential of the new system to characterize different
polymeric layers, as well as fillers and additives in polymeric materials. In
addition to the results, a methodical chapter deals with preparation aspects,
investigation skills and imaging modes of the electron microscope. Here the
so-called variable pressure mode (VP) is mentioned, where nitrogen is used
as imaging gas at pressures between 10 and 133 Pa. Furthermore, the lowvoltage
mode in the high vacuum is discussed which gives a better surface
resolution due to a smaller interaction volume of the electrons in the material
and furthermore causes lower beam damage. Both modes work without a
conductive coating on the specimen, which is a requirement for Raman
investigations. Further capabilities of the RISE system in combination with
the EDXS will be discussed afterwards.
Originalspracheenglisch
Aufsatznummer1800237
Seiten (von - bis)1800237
Seitenumfang10
FachzeitschriftMacromolecular symposia
Jahrgang384
Ausgabenummer1
DOIs
PublikationsstatusVeröffentlicht - 2019

Schlagwörter

    ASJC Scopus subject areas

    • !!Materials Science(all)
    • !!Condensed Matter Physics
    • !!Materials Chemistry
    • !!Polymers and Plastics
    • Organische Chemie

    Fields of Expertise

    • Advanced Materials Science

    Dies zitieren

    @article{ad058e97f80a4fa19e0a2ca274bc1f97,
    title = "The Combination of Electron Microscopy, RamanMicroscopy and Energy Dispersive X-Ray Spectroscopyfor the Investigation of Polymeric Materials",
    abstract = "Polymers play an important role in materials science, because of theiradvantages over other types of materials. The huge variety in terms of thetypes, arrangements and combinations of monomers found in polymers leadsto an extremely wide diversity of different polymeric materials. Although thereis a wide range of analytical techniques to characterize polymeric materials,here the focus is laid on a novel correlative microscopy method, combiningRaman microscopy, scanning electron microscopy (SEM) and energy dispersiveX-ray spectroscopy (EDXS). Therefore, three polymeric specimens wereanalysed by the new system RISE (Raman Imaging and Scanning Electronmicroscopy) in combination with EDXS. The aim of this contribution is todemonstrate the potential of the new system to characterize differentpolymeric layers, as well as fillers and additives in polymeric materials. Inaddition to the results, a methodical chapter deals with preparation aspects,investigation skills and imaging modes of the electron microscope. Here theso-called variable pressure mode (VP) is mentioned, where nitrogen is usedas imaging gas at pressures between 10 and 133 Pa. Furthermore, the lowvoltagemode in the high vacuum is discussed which gives a better surfaceresolution due to a smaller interaction volume of the electrons in the materialand furthermore causes lower beam damage. Both modes work without aconductive coating on the specimen, which is a requirement for Ramaninvestigations. Further capabilities of the RISE system in combination withthe EDXS will be discussed afterwards.",
    keywords = "cellulose, EDXS, electron microscopy, polymer films, Raman spectroscopy",
    author = "Ruth Schmidt and Fitzek, {Harald Matthias} and Manfred Nachtnebel and Claudia Mayrhofer and Hartmuth Schr{\"o}ttner and Armin Zankel",
    year = "2019",
    doi = "10.1002/masy.201800237",
    language = "English",
    volume = "384",
    pages = "1800237",
    journal = "Macromolecular symposia",
    issn = "0258-0322",
    publisher = "Wiley-VCH",
    number = "1",

    }

    TY - JOUR

    T1 - The Combination of Electron Microscopy, RamanMicroscopy and Energy Dispersive X-Ray Spectroscopyfor the Investigation of Polymeric Materials

    AU - Schmidt, Ruth

    AU - Fitzek, Harald Matthias

    AU - Nachtnebel, Manfred

    AU - Mayrhofer, Claudia

    AU - Schröttner, Hartmuth

    AU - Zankel, Armin

    PY - 2019

    Y1 - 2019

    N2 - Polymers play an important role in materials science, because of theiradvantages over other types of materials. The huge variety in terms of thetypes, arrangements and combinations of monomers found in polymers leadsto an extremely wide diversity of different polymeric materials. Although thereis a wide range of analytical techniques to characterize polymeric materials,here the focus is laid on a novel correlative microscopy method, combiningRaman microscopy, scanning electron microscopy (SEM) and energy dispersiveX-ray spectroscopy (EDXS). Therefore, three polymeric specimens wereanalysed by the new system RISE (Raman Imaging and Scanning Electronmicroscopy) in combination with EDXS. The aim of this contribution is todemonstrate the potential of the new system to characterize differentpolymeric layers, as well as fillers and additives in polymeric materials. Inaddition to the results, a methodical chapter deals with preparation aspects,investigation skills and imaging modes of the electron microscope. Here theso-called variable pressure mode (VP) is mentioned, where nitrogen is usedas imaging gas at pressures between 10 and 133 Pa. Furthermore, the lowvoltagemode in the high vacuum is discussed which gives a better surfaceresolution due to a smaller interaction volume of the electrons in the materialand furthermore causes lower beam damage. Both modes work without aconductive coating on the specimen, which is a requirement for Ramaninvestigations. Further capabilities of the RISE system in combination withthe EDXS will be discussed afterwards.

    AB - Polymers play an important role in materials science, because of theiradvantages over other types of materials. The huge variety in terms of thetypes, arrangements and combinations of monomers found in polymers leadsto an extremely wide diversity of different polymeric materials. Although thereis a wide range of analytical techniques to characterize polymeric materials,here the focus is laid on a novel correlative microscopy method, combiningRaman microscopy, scanning electron microscopy (SEM) and energy dispersiveX-ray spectroscopy (EDXS). Therefore, three polymeric specimens wereanalysed by the new system RISE (Raman Imaging and Scanning Electronmicroscopy) in combination with EDXS. The aim of this contribution is todemonstrate the potential of the new system to characterize differentpolymeric layers, as well as fillers and additives in polymeric materials. Inaddition to the results, a methodical chapter deals with preparation aspects,investigation skills and imaging modes of the electron microscope. Here theso-called variable pressure mode (VP) is mentioned, where nitrogen is usedas imaging gas at pressures between 10 and 133 Pa. Furthermore, the lowvoltagemode in the high vacuum is discussed which gives a better surfaceresolution due to a smaller interaction volume of the electrons in the materialand furthermore causes lower beam damage. Both modes work without aconductive coating on the specimen, which is a requirement for Ramaninvestigations. Further capabilities of the RISE system in combination withthe EDXS will be discussed afterwards.

    KW - cellulose

    KW - EDXS

    KW - electron microscopy

    KW - polymer films

    KW - Raman spectroscopy

    UR - http://www.scopus.com/inward/record.url?scp=85064509162&partnerID=8YFLogxK

    U2 - 10.1002/masy.201800237

    DO - 10.1002/masy.201800237

    M3 - Article

    VL - 384

    SP - 1800237

    JO - Macromolecular symposia

    JF - Macromolecular symposia

    SN - 0258-0322

    IS - 1

    M1 - 1800237

    ER -