Spectral emissivities and emissivity X-points of pure molybdenum and tungsten

Claus Cagran, Gernot Pottlacher, M. Rink, W. Bauer

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Abstract

Prediction methods for thermophysical properties of metals and alloys such as emissivity are of great interest not only for science but also for the metal working industry as time-consuming and often expensive measurements may not be required. As recent results have shown, an assumed Hagen-Rubens relation for the prediction of emissivity based on electrical resistivity results was not found in the visible spectra. Within this work normal spectral emissivity results obtained with two complete different techniques are presented. On one hand, a multi-wavelength-pyrometry (MWLP) approach has been used to obtain emissivity as a function of temperature at 684.5, 902, and 1570 nm, and on the other hand, a radiance-comparison method was used to obtain emissivity isotherms as a function of wavelength for a range starting from 1 to 24 μm. From results of the radiance-comparison measurements an intersection of the isotherms, often referred to as the emissivity x-point, was found for both investigated materials, tungsten and molybdenum. According to these results, the x-point wavelengths are given by λ x = 1.41 μm for tungsten and λ x = 1.55 μm for molybdenum. Based on these x-points and the MWLP measurements, a new prediction method for the liquid-phase behavior of emissivity is developed and discussed.

Originalspracheenglisch
Seiten (von - bis)1001-1015
Seitenumfang15
FachzeitschriftInternational Journal of Thermophysics
Jahrgang26
Ausgabenummer4
DOIs
PublikationsstatusVeröffentlicht - Jul 2005

Fingerprint

Tungsten
Molybdenum
emissivity
molybdenum
tungsten
Pyrometry
Wavelength
Isotherms
Metal working
radiance
wavelengths
Phase behavior
temperature measurement
isotherms
metal working
predictions
Thermodynamic properties
Metals
thermophysical properties
visible spectrum

Schlagwörter

    ASJC Scopus subject areas

    • !!Physical and Theoretical Chemistry
    • !!Mechanics of Materials
    • !!Computational Mechanics
    • !!Fluid Flow and Transfer Processes
    • !!Physics and Astronomy (miscellaneous)

    Fields of Expertise

    • Advanced Materials Science

    Dies zitieren

    Spectral emissivities and emissivity X-points of pure molybdenum and tungsten. / Cagran, Claus; Pottlacher, Gernot; Rink, M.; Bauer, W.

    in: International Journal of Thermophysics, Jahrgang 26, Nr. 4, 07.2005, S. 1001-1015.

    Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

    @article{fb306b5eda974a4ebf5525274c2856d3,
    title = "Spectral emissivities and emissivity X-points of pure molybdenum and tungsten",
    abstract = "Prediction methods for thermophysical properties of metals and alloys such as emissivity are of great interest not only for science but also for the metal working industry as time-consuming and often expensive measurements may not be required. As recent results have shown, an assumed Hagen-Rubens relation for the prediction of emissivity based on electrical resistivity results was not found in the visible spectra. Within this work normal spectral emissivity results obtained with two complete different techniques are presented. On one hand, a multi-wavelength-pyrometry (MWLP) approach has been used to obtain emissivity as a function of temperature at 684.5, 902, and 1570 nm, and on the other hand, a radiance-comparison method was used to obtain emissivity isotherms as a function of wavelength for a range starting from 1 to 24 μm. From results of the radiance-comparison measurements an intersection of the isotherms, often referred to as the emissivity x-point, was found for both investigated materials, tungsten and molybdenum. According to these results, the x-point wavelengths are given by λ x = 1.41 μm for tungsten and λ x = 1.55 μm for molybdenum. Based on these x-points and the MWLP measurements, a new prediction method for the liquid-phase behavior of emissivity is developed and discussed.",
    keywords = "Emissivity x-point, Molybdenum, Multi-wavelength pyrometry, Normal spectral emissivity, Radiance comparison, Tungsten",
    author = "Claus Cagran and Gernot Pottlacher and M. Rink and W. Bauer",
    year = "2005",
    month = "7",
    doi = "10.1007/s10765-005-6680-1",
    language = "English",
    volume = "26",
    pages = "1001--1015",
    journal = "International Journal of Thermophysics",
    issn = "0195-928X",
    publisher = "Springer New York",
    number = "4",

    }

    TY - JOUR

    T1 - Spectral emissivities and emissivity X-points of pure molybdenum and tungsten

    AU - Cagran, Claus

    AU - Pottlacher, Gernot

    AU - Rink, M.

    AU - Bauer, W.

    PY - 2005/7

    Y1 - 2005/7

    N2 - Prediction methods for thermophysical properties of metals and alloys such as emissivity are of great interest not only for science but also for the metal working industry as time-consuming and often expensive measurements may not be required. As recent results have shown, an assumed Hagen-Rubens relation for the prediction of emissivity based on electrical resistivity results was not found in the visible spectra. Within this work normal spectral emissivity results obtained with two complete different techniques are presented. On one hand, a multi-wavelength-pyrometry (MWLP) approach has been used to obtain emissivity as a function of temperature at 684.5, 902, and 1570 nm, and on the other hand, a radiance-comparison method was used to obtain emissivity isotherms as a function of wavelength for a range starting from 1 to 24 μm. From results of the radiance-comparison measurements an intersection of the isotherms, often referred to as the emissivity x-point, was found for both investigated materials, tungsten and molybdenum. According to these results, the x-point wavelengths are given by λ x = 1.41 μm for tungsten and λ x = 1.55 μm for molybdenum. Based on these x-points and the MWLP measurements, a new prediction method for the liquid-phase behavior of emissivity is developed and discussed.

    AB - Prediction methods for thermophysical properties of metals and alloys such as emissivity are of great interest not only for science but also for the metal working industry as time-consuming and often expensive measurements may not be required. As recent results have shown, an assumed Hagen-Rubens relation for the prediction of emissivity based on electrical resistivity results was not found in the visible spectra. Within this work normal spectral emissivity results obtained with two complete different techniques are presented. On one hand, a multi-wavelength-pyrometry (MWLP) approach has been used to obtain emissivity as a function of temperature at 684.5, 902, and 1570 nm, and on the other hand, a radiance-comparison method was used to obtain emissivity isotherms as a function of wavelength for a range starting from 1 to 24 μm. From results of the radiance-comparison measurements an intersection of the isotherms, often referred to as the emissivity x-point, was found for both investigated materials, tungsten and molybdenum. According to these results, the x-point wavelengths are given by λ x = 1.41 μm for tungsten and λ x = 1.55 μm for molybdenum. Based on these x-points and the MWLP measurements, a new prediction method for the liquid-phase behavior of emissivity is developed and discussed.

    KW - Emissivity x-point

    KW - Molybdenum

    KW - Multi-wavelength pyrometry

    KW - Normal spectral emissivity

    KW - Radiance comparison

    KW - Tungsten

    UR - http://www.scopus.com/inward/record.url?scp=26044480107&partnerID=8YFLogxK

    U2 - 10.1007/s10765-005-6680-1

    DO - 10.1007/s10765-005-6680-1

    M3 - Article

    VL - 26

    SP - 1001

    EP - 1015

    JO - International Journal of Thermophysics

    JF - International Journal of Thermophysics

    SN - 0195-928X

    IS - 4

    ER -