Selection of the Proper Diffusion Welding Parameters for the Heterogeneous Joint Ti Grade2/AISI 316L

Jaromir Moravec, Martina Dikovits, Coline Beal, Iva Novakova, Rebecca Chandezon, Jiri Sobotka

Publikation: Beitrag in einer FachzeitschriftArtikelBegutachtung

Abstract

The creation of the heterogeneous joints at materials with the different physical and mechanical properties is always problematic. As one of methods by which can be achieved very good results is there a diffusion welding. The aim of paper is to show the possibilities of diffusion welding utilization at creation the heterogeneous joints between Titan grade 2 and high-alloyed austenitic steel AISI 316L. The fundamental theory of diffusion and also scheme and realization of experimentally created diffusion welds in the thermal-mechanical simulator Gleeble® 3500 is described in the article. Furthermore, procedure of technological parameters selection when optimization of heterogeneous joint strength properties including metallographic evaluation are taken into account, are also presented. © 2017. Published by Manufacturing Technology. All rights reserved.
Originalspracheenglisch
Seiten (von - bis)231-237
FachzeitschriftManufacturing Technology
Jahrgang17
Ausgabenummer2
DOIs
PublikationsstatusVeröffentlicht - Apr. 2017

Fingerprint

Untersuchen Sie die Forschungsthemen von „Selection of the Proper Diffusion Welding Parameters for the Heterogeneous Joint Ti Grade2/AISI 316L“. Zusammen bilden sie einen einzigartigen Fingerprint.

Dieses zitieren