RPM-SYNCHRONOUS GRINDING - Investigation and comparison of surface topography of Synchro-Finish manufactured workpieces

Thomas Spenger*, Franz Haas, Ulrike Cihak-Bayr, Stefan J. Eder, Markus Weiss, Martin Weinzerl, Michael Schneider

*Korrespondierende/r Autor/in für diese Arbeit

Publikation: KonferenzbeitragPaper

Abstract

The innovative RPM-Synchronous Grinding process enables highly efficient manufacturing of various geometries in an ordinary plunge grinding process. An oscillation of the infeed axis, which is coupled to the rotary workpiece spindle axis, like in conventional non-circular grinding approaches is not required. This is achieved by using a fixed ratio of grinding wheel- and workpiece speed and also a non-circular grinding wheel geometry. In this first test series, practice-orientated circular steel-workpieces are Synchro-Finish ground with conventional vitrified grinding wheels for finishing applications. The surface topography of the Synchro-Finished parts is evaluated and compared with conventionally ground workpieces.
Originalspracheenglisch
Seiten476-481
Seitenumfang6
DOIs
PublikationsstatusVeröffentlicht - 2019
Veranstaltung52nd CIRP Conference on Manufacturing Systems - Ljubljana, Slowenien
Dauer: 12 Jun 201914 Jun 2019
https://www.cirp-cms2019.org/

Konferenz

Konferenz52nd CIRP Conference on Manufacturing Systems
KurztitelCIRP CMS 2019
LandSlowenien
OrtLjubljana
Zeitraum12/06/1914/06/19
Internetadresse

Schlagwörter

  • RPM-synchronous grinding
  • RSG
  • grinding
  • finishing
  • synchro-finish
  • surface topography

Dieses zitieren